JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	L. Malina, J. M. Coello de Portugal, J. Dilly, P. K. Skowro, and R. Tom?ís, “Optics Measurements in Storage Rings: Simultaneous 3-Dimensional Beam Excitation and Novel Harmonic Analysis”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 177-181. doi:10.18429/JACoW-IBIC2018-TUOB02
[n]	S. G. Arutunian, “Vibrating Wire Sensors For Beam Instrumentation”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOSTFA01, pp. 1-7. 
[n]	J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102. 
[n]	J. Teichert et al., “Pulsed Mode Operation and Longitudinal Parameter Measurement of the Rossendorf SRF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC081, pp. 262-264. 
[n]	S. V. Miginsky, “Electron Guns and Beamlines in the View of Emittance Compensation”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA022, pp. 360-362. 
[n]	A. Dolinskyy et al., “Stability Boundary of Ion Beams in the FAIR Storage Rings”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP078, pp. 3886-3888. 
[n]	W. Vodel, R. Geithner, R. Neubert, A. Peters, M. Schwickert, and P. Seidel, “An LTS SQUID-Based High Precision Measurement Tool for Nuclear Physics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP046, pp. 3555-3557. 
[n]	A. A. Galatis, J. M. Belleman, A. Peters, U. Raich, and A. M. Zoubir, “Digital Beam Position Measurement at GSI-SIS and CERN-PS”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT018, pp. XX-XX. 
[n]	J. E. Leiss, J. B. Broberg, S. Penner, and J. E. Rose, “Transient Beam Loading in Electron Linear Accelerators”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1027-1031. 
[n]	Y. Suetsugu, N. Akasaka, T. Kageyama, K. Kanazawa, K. Satoh, and Y. Takeuchi, “Development of the Movable Mask Free from Trapped Mode for the KEKB”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH044, pp. 2186-2188. 
[n]	R. W. de Leeuw, J. I. M. Botman, H. L. Hagedoorn, C. J. Timmermans, G. A. Webers, and I. F. van Maanen, “A 10 MeV Injection Beam Transport Line for a Racetrack Microtron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2417-2420. 
[n]	Ya. V. Shashkov, A. A. Mitrofanov, N. P. Sobenin, and V. Zvyagintsev, “Higher Order Modes Damping for 9-cell Structure with Modified Drift Tubes”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC17, pp. 356-358. 
[n]	F. Burkart et al., “The Experimental Area at the ARES LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 867-870. doi:10.18429/JACoW-IPAC2019-MOPTS014
[n]	J. I. M. Botman, H. L. Hagedoorn, R. J. W. Stas, and R. W. de Leeuw, “Orbit Dynamics in a Low Energy Electron Linear Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP045L, pp. 944-946. 
[n]	G. A. Blair, “Lasers in Beam Diagnostics”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUTTT01, pp. 55-64. 
[n]	J. Henderson, A. C. Dexter, A. J. Moss, and E. W. Snedden, “Laser-to-RF Synchronisation Drift Compensation for the CLARA test facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 87-90. doi:10.18429/JACoW-LINAC2022-MOPOPA11
[n]	S. Gustafsson and C. Pagani, “Effect and Control of the Dee to Dee Coupling Capacitances”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-11, pp. 370-373. 
[n]	I. V. Agapov and G. Geloni, “Towards Realistic Modelling of the FEL Radiation for the European XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA006, pp. 1173-1175. 
[n]	J. W. Flanagan, “Diagnostics for Ultra-low Emittance Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEYB01, pp. 1959-1963. 
[n]	W. J. G. M et al., “The Accelerating Cavity of the TEUFEL Racetrack Microtron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2095-2098. 
[n]	G. Geloni, V. Kocharyan, and E. Saldin, “Theoretical Computation of the Polarization Characteristics of an X-Ray Free-Electron Laser with Planar Undulator”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 38-42. doi:10.18429/JACoW-FEL2015-MOP008
[n]	Z. Ma, L. Ma, W. Gao, and P. Xue, “BEPCII Timing System and Phase Lock System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16009, pp. XX-XX. 
[n]	L. Corner et al., “Development of a High Power Fibre Laser for Laser Based Electron Beam Diagnostics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC124, pp. 1359-1361. 
[n]	M. A. Palmer, J. A. Crittenden, J. Kandaswamy, T. I. O, and A. Temnykh, “Design, Fabrication and Characterization of a Large-Aperture Quadrupole Magnet for CESR-c”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT080, pp. 4063-4065. 
[n]	F. M?®ot et al., “Recent Developments On The EMMA On-line Commissioning Software”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD024, pp. 4325-4327. 
[n]	S. Biedron, L. Giannessi, K. Horovitz, and S. V. Milton, “Nonlinear Harmonic Selection in an FEL Undulator System”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD10, pp. 69-72. 
[n]	A. P. Shishlo, A. V. Aleksandrov, A. P. Zhukov, and Y. Liu, “Model Based Optics Studies in the MEBT Section of SNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 814-816. doi:10.18429/JACoW-IPAC2017-MOPIK118
[n]	W. Gai, M. Borland, K.-J. Kim, W. Liu, J. Sheppard, and A. Xiao, “Emittance Evolution of the Drive Electron Beam in a Helical Undulator for ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP068, pp. 2656-2658. 
[n]	J. W. Wang et al., “R&D of a Super-compact SLED System at SLAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 39-41. doi:10.18429/JACoW-IPAC2016-MOOCA01
[n]	G. Ha, M.-H. Cho, W. Namkung, W. Gai, K.-J. Kim, and J. G. Power, “High Resolution Longitudinal Property Measurement using Emittance Exchange Beam Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 320-322. doi:10.18429/JACoW-IPAC2015-MOPJE020
[n]	N. Vinokurov et al., “Status and Prospects of the Novosibirsk FEL Facility”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHY01, pp. 133-135. 
[n]	H. Van Der Beken, D. R. Machen, J. H. B. Madsen, and C. Serre, “The Process Control Computer at the CERN Proton Synchrotron: Its Application in the Operation of a Fast Ejected Beam”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 864-866. 
[n]	S. Gustafsson, “A Superconducting Electromagnetic Channel for AGOR”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-07, pp. 354-357. 
[n]	P. Piot, Y.-E. Sun, and K.-J. Kim, “Limiting Effects in the Round-To-Flat Beam Transformation”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP47, pp. 150-152. 
[n]	M. A. Wilson et al., “NBS-LANL RTM Injector Installation”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3021-3024. 
[n]	A. Penirschke et al., “Grounded Coplanar Waveguide Transmission Lines as Pickups for Beam Position Monitoring in Particle Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC29, pp. 438-441. 
[n]	F. M?®ot, Y. Giboudot, D. J. Kelliher, and T. Yokoi, “Beam Dynamics Simulations regarding the Experimental FFAG EMMA, using the on-line code”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD023, pp. 4322-4324. 
[n]	R. J. Steinhagen, M. J. Boland, and T. G. Lucas, “A Multiband-Instability-Monitor for High-Frequency Intra-Bunch Beam Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUBL3, pp. 327-330. 
[n]	E. Huttel, I. Birkel, A.-S. Muller, and P. Wesolowski, “Investigation of the Injection into the ANKA Storage Ring by a Turn by Turn BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN021, pp. 3958-3960. 
[n]	G. Geloni, V. Kocharyan, and E. Saldin, “The Effects of Betatron Motion on the Preservation of FEL Microbunching”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB30, pp. 81-84. 
[n]	M. Alhumaidi and A. M. Zoubir, “A Transverse Feedback System using Multiple Pickups for Noise Minimization”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO005, pp. 487-489. 
[n]	F. Becker et al., “Beam Induced Fluorescence Monitors for FAIR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR012, pp. 798-800. 
[n]	A. S. Aryshev et al., “Micron Size Laser-Wire System at the ATF Extraction Line, Recent Results and ATF-II Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP023, pp. 3997-3999. 
[n]	R. B. Appleby et al., “Tactile Collider : Accelerator Outreach to Visually Impaired Audiences”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3518-3521. doi:10.18429/JACoW-IPAC2019-THPMP035
[n]	A. M. Porcellato, A. Battistella, and S. Marigo, “Automation of the Cavity Parameter Measurements”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1109-1112. 
[n]	S. V. Miginsky, “An Optimizer for High-Current Beamlines”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15025, pp. XX-XX. 
[n]	R. A. Gore, “LAMPF Control Philosophy”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper C-2, pp. 134-139. 
[n]	G. R. Lambertson, K.-J. Kim, and F. V. Voelker, “The Slotted Coax as a  Beam Electrode”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2158-2161. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search