Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Shang, R. Maulik, Y. Sun, and T. Xu, “Application of Artificial Neural Network in the APS Linac Bunch Charge Transmission Efficiency”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2155-2158. doi:10.18429/JACoW-IPAC2021-TUPAB287
[n] M. Borland and V. Sajaev, “Simulation of Using Orbit Bumps to Test Sextupole Compensation for the Short Pulse X-ray System at the Advanced Photon Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO06, pp. 246-248.
[n] V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1272-1275. doi:10.18429/JACoW-IPAC2018-TUPMF012
[n] H. Anamkath et al., “Design and Factory Test of the e e- Frascati Linear Accelerator for DAPhiNE”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 716-719.
[n] L. Kronshorst, H. De Gersem, P. Hülsmann, and W. Müller, “Higher order mode assessment in a single mode accelerating cavity”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB008, unpublished.
[n] G. Orlandi, L. Picardi, C. Ronsivalle, and A. Vignati, “The TOP-ISS Linear Accelerator: A High Frequency Proton Linac for Therapy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP049G, pp. 2638-2640.
[n] X. H. Guo et al., “Cryogenic System for the ADS Injector II in IMP, CAS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB044, pp. 576-578.
[n] G.-H. Luo, C. K. Kuan, T. H. Lee, and D.-J. Wang, “Beam Parameters Measurement by a Pinhole Detector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI095, pp. 1930-1932.
[n] K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
[n] P. N. Prakash, J. Zacharias, K. K. Mistri, S. S. K. Sonti, and A. Roy, “Fabrication of Superconducting Niobium Cavities at Nuclear Science Centre”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16054, pp. XX-XX.
[n] H. Liebermann, H. Podlech, and U. Ratzinger, “Peak Field Optimization for the Superconducting CH Structure”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH153, pp. 415-417.
[n] J. R. Delayen, “Applications of Spoke Cavities”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TU302, pp. 377-381.
[n] M. Odera, A. Goto, and M. Hemmi, “Field Characteristics of an Alvarez-Type Linac Structure Having Chain-Like Electrode Array”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3222-3225.
[n] J. J. Welch, “Effects of the CHESS Wigglers on a Beam with an Angular Offset”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC14, pp. 2866-2867.
[n] I. E. Campisi, A. M. Johnson, L. K. Summers, A. Betto, and B. H. Branson, “The Design and Production of the Higher-Order-Mode Loads for CEBAF”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1220-1223.
[n] N. A. Tahir et al., “Interaction of the CERN Large Hadron Collider (LHC) Beam with Solid Metallic Targets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT042, pp. 641-643.
[n] J. Pina et al., “The TileCal DCS Detector Control System”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP14, pp. 118-121.
[n] D. Reistad, “Status of the CELSIUS Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 128-131.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Shang, R. Maulik, Y. Sun, and T. Xu, “Application of Artificial Neural Network in the APS Linac Bunch Charge Transmission Efficiency”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2155-2158.
- M. Borland and V. Sajaev, “Simulation of Using Orbit Bumps to Test Sextupole Compensation for the Short Pulse X-ray System at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO06, pp. 246-248.
- V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1272-1275.
- H. Anamkath et al., “Design and Factory Test of the e e- Frascati Linear Accelerator for DAPhiNE”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 716-719.
- L. Kronshorst, H. De Gersem, P. Hülsmann, and W. Müller, “Higher order mode assessment in a single mode accelerating cavity”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB008, this conference.
- G. Orlandi, L. Picardi, C. Ronsivalle, and A. Vignati, “The TOP-ISS Linear Accelerator: A High Frequency Proton Linac for Therapy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP049G, pp. 2638-2640.
- X. H. Guo et al., “Cryogenic System for the ADS Injector II in IMP, CAS”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB044, pp. 576-578.
- G.-H. Luo, C. K. Kuan, T. H. Lee, and D.-J. Wang, “Beam Parameters Measurement by a Pinhole Detector”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI095, pp. 1930-1932.
- K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
- P. N. Prakash, J. Zacharias, K. K. Mistri, S. S. K. Sonti, and A. Roy, “Fabrication of Superconducting Niobium Cavities at Nuclear Science Centre”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16054, pp. XX-XX.
- H. Liebermann, H. Podlech, and U. Ratzinger, “Peak Field Optimization for the Superconducting CH Structure”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH153, pp. 415-417.
- J. R. Delayen, “Applications of Spoke Cavities”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TU302, pp. 377-381.
- M. Odera, A. Goto, and M. Hemmi, “Field Characteristics of an Alvarez-Type Linac Structure Having Chain-Like Electrode Array”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3222-3225.
- J. J. Welch, “Effects of the CHESS Wigglers on a Beam with an Angular Offset”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC14, pp. 2866-2867.
- I. E. Campisi, A. M. Johnson, L. K. Summers, A. Betto, and B. H. Branson, “The Design and Production of the Higher-Order-Mode Loads for CEBAF”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1220-1223.
- N. A. Tahir et al., “Interaction of the CERN Large Hadron Collider (LHC) Beam with Solid Metallic Targets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT042, pp. 641-643.
- J. Pina et al., “The TileCal DCS Detector Control System”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP14, pp. 118-121.
- D. Reistad, “Status of the CELSIUS Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 128-131.
Back to search
