Favourites
For Word
[n] L. Facci, D. Rizzetto, G. Corniani, A. Matheisen, P. Michelato, and L. Monaco, “Quality Control and Processes Optimization for the EXFEL Superconducting Cavities Series Production at Ettore Zanon spa”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP042, pp. 208-211.
[n] G. Bisoffi et al., “Hardware Commissioning of the Renovated PIAVE Injector at INFN-LNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 949-952. doi:10.18429/JACoW-IPAC2019-MOPTS042
[n] T. Lamy et al., “Experimental Activities with the LPSC Charge Breeder in the European Context”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper WEOBMH01, pp. 120-126.
[n] S. N. Andrianov and N. S. Edamenko, “Formation of a Given Distribution of the Beam in the Periodic Channel”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 412-414. doi:10.18429/JACoW-RUPAC2016-WEPSB023
[n] D. Aguglia, F. Boattini, L. Bottura, and G. Brauchli, “A two harmonics circuit for the powering of the very fast RCS (Rapid Cycling Synchrotron) of the muon collider accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3746-3749. doi:10.18429/JACoW-IPAC2023-WEPM078
[n] N. Galindo Munoz, N. Catalan-Lasheras, V. E. Boria, and A. Faus-Golfe, “Pre-Alignment Techniques Developments and Measurement Results of the Electromagnetic Center of Warm High-Gradient Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1868-1871. doi:10.18429/JACoW-IPAC2017-TUPIK076
[n] O. A. Tarvainen and S. S. Kurennoy, “Conceptual Design for a Sputter-type Negative Ion Source Based on Electron Cyclotron Resonance Plasma Heating”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-03, pp. 64-67.
[n] A. A. Gorzawski, R. Jacobsson, and J. Wenninger, “Beam Offset Stabilization Techniques for the LHC Collision Points”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1438-1441. doi:10.18429/JACoW-IPAC2016-TUPMW012
[n] S. Y. Xu and S. Fu, “Magnetic Field Tracking at CSNS/RCS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 306-308. doi:10.18429/JACoW-HB2018-WEP2PO018
[n] J. T. Stafford-Haworth, D. Kuchler, V. Toivanen, and J. Roehrich, “Boron Ion Beam Production with the Supernanogan ECR Ion Source for the CERN BIO-LEIR Facility”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH01, pp. 132-134.
[n] B. J. Holzer et al., “Study of the Impact of Fringe Fields of the Large Aperture Triplets on the Linear Optics of the HL-LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA059, pp. 2642-2644.
[n] A. P. Sabersky, “Optical Beam Diagnostics on PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2162-2165.
[n] S. Mey and R. Gebel, “Towards an RF Wien-Filter for EDM Experiments at COSY”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3761-3763. doi:10.18429/JACoW-IPAC2015-THPF031
[n] R. J. Steinhagen, “FAIR Commissioning - Concepts and Strategies in View of High-Intensity Operation”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 141-146. doi:10.18429/JACoW-HB2018-TUA2WD01
[n] D. Quartullo, T. Argyropoulos, and A. Lasheen, “Momentum Slip-Stacking Simulations for CERN SPS Ion Beams with Collective Effects”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 174-179. doi:10.18429/JACoW-HB2018-TUP2WA02
[n] B. Mukherjee and J. Khachan, “Operational Health Physics During The Maintenance Of A Radioisotope Production Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 146-150.
[n] K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
[n] O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3161-3164. doi:10.18429/JACoW-IPAC2018-THPAF077
[n] M. I. Frankl et al., “Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 736-739. doi:10.18429/JACoW-IPAC2018-TUPAF028
[n] N. Galindo Munoz, N. Catalan-Lasheras, A. Grudiev, V. E. Boria, and A. Faus-Golfe, “Pre-alignment of Accelerating Structures for Compact Acceleration and High Gradient using In-situ Radiofrequency Methods”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2696-2699. doi:10.18429/JACoW-IPAC2016-WEPOR016
[n] A. Calanna et al., “Upgrade of the LNS Superconducting Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3779-3781. doi:10.18429/JACoW-IPAC2015-THPF037
[n] X. Luo et al., “Fabrication, Assembly and Test of the 24-cell Superconducting Linac Module for the CAEP FEL-THz facility”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 19-21. doi:10.18429/JACoW-SAP2017-MOCH2
[n] I. Boscolo et al., “Experiments on Photoemission from Ferroelectric Ceramics”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B02, pp. 1628-1630.
[n] J.-W. Kim, “Status of the Rare Isotope Science Project in Korea”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB028, pp. 534-536.
[n] M. Cavenago et al., “A RFQ Cooler Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3627-3630. doi:10.18429/JACoW-IPAC2018-THPAL008
[n] M. Vretenar et al., “Progress in the Construction of Linac4 at CERN”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB010, pp. 864-866.
[n] S. Fujishima et al., “Design Study of Sector Magnet for the RIKEN Superconducting Ring Cyclotron 2”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP116G, pp. 2305-2310.
[n] B. Mukherjee, “A ''Cook-Book-Method'' of Shielding Design for Compact Medical Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-43, pp. 330-333.
[n] L. Ferrari, A. Palmieri, and A. Pisent, “Thermo-Mechanical Calculations for the SPES RFQ”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB13, pp. 219-221.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Facci, D. Rizzetto, G. Corniani, A. Matheisen, P. Michelato, and L. Monaco, “Quality Control and Processes Optimization for the EXFEL Superconducting Cavities Series Production at Ettore Zanon spa”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP042, pp. 208-211.
- G. Bisoffi et al., “Hardware Commissioning of the Renovated PIAVE Injector at INFN-LNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 949-952.
- T. Lamy et al., “Experimental Activities with the LPSC Charge Breeder in the European Context”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper WEOBMH01, pp. 120-126.
- S. N. Andrianov and N. S. Edamenko, “Formation of a Given Distribution of the Beam in the Periodic Channel”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 412-414.
- D. Aguglia, F. Boattini, L. Bottura, and G. Brauchli, “A two harmonics circuit for the powering of the very fast RCS (Rapid Cycling Synchrotron) of the muon collider accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM078, pp. 3746-3749.
- N. Galindo Munoz, N. Catalan-Lasheras, V. E. Boria, and A. Faus-Golfe, “Pre-Alignment Techniques Developments and Measurement Results of the Electromagnetic Center of Warm High-Gradient Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1868-1871.
- O. A. Tarvainen and S. S. Kurennoy, “Conceptual Design for a Sputter-type Negative Ion Source Based on Electron Cyclotron Resonance Plasma Heating”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-03, pp. 64-67.
- A. A. Gorzawski, R. Jacobsson, and J. Wenninger, “Beam Offset Stabilization Techniques for the LHC Collision Points”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1438-1441.
- S. Y. Xu and S. Fu, “Magnetic Field Tracking at CSNS/RCS”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 306-308.
- J. T. Stafford-Haworth, D. Kuchler, V. Toivanen, and J. Roehrich, “Boron Ion Beam Production with the Supernanogan ECR Ion Source for the CERN BIO-LEIR Facility”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH01, pp. 132-134.
- B. J. Holzer et al., “Study of the Impact of Fringe Fields of the Large Aperture Triplets on the Linear Optics of the HL-LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA059, pp. 2642-2644.
- A. P. Sabersky, “Optical Beam Diagnostics on PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2162-2165.
- S. Mey and R. Gebel, “Towards an RF Wien-Filter for EDM Experiments at COSY”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3761-3763.
- R. J. Steinhagen, “FAIR Commissioning - Concepts and Strategies in View of High-Intensity Operation”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 141-146.
- D. Quartullo, T. Argyropoulos, and A. Lasheen, “Momentum Slip-Stacking Simulations for CERN SPS Ion Beams with Collective Effects”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 174-179.
- B. Mukherjee and J. Khachan, “Operational Health Physics During The Maintenance Of A Radioisotope Production Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 146-150.
- K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
- O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3161-3164.
- M. I. Frankl et al., “Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 736-739.
- N. Galindo Munoz, N. Catalan-Lasheras, A. Grudiev, V. E. Boria, and A. Faus-Golfe, “Pre-alignment of Accelerating Structures for Compact Acceleration and High Gradient using In-situ Radiofrequency Methods”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2696-2699.
- A. Calanna et al., “Upgrade of the LNS Superconducting Cyclotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3779-3781.
- X. Luo et al., “Fabrication, Assembly and Test of the 24-cell Superconducting Linac Module for the CAEP FEL-THz facility”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 19-21.
- I. Boscolo et al., “Experiments on Photoemission from Ferroelectric Ceramics”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B02, pp. 1628-1630.
- J.-W. Kim, “Status of the Rare Isotope Science Project in Korea”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB028, pp. 534-536.
- M. Cavenago et al., “A RFQ Cooler Development”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3627-3630.
- M. Vretenar et al., “Progress in the Construction of Linac4 at CERN”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB010, pp. 864-866.
- S. Fujishima et al., “Design Study of Sector Magnet for the RIKEN Superconducting Ring Cyclotron 2”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP116G, pp. 2305-2310.
- B. Mukherjee, “A ''Cook-Book-Method'' of Shielding Design for Compact Medical Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-43, pp. 330-333.
- L. Ferrari, A. Palmieri, and A. Pisent, “Thermo-Mechanical Calculations for the SPES RFQ”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB13, pp. 219-221.
Back to search