Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 687-690.
[n] G. B. Christian et al., “PandABlocks - a Flexible Framework for Zynq7000-Based SoC Configuration”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 683. doi:10.18429/JACoW-ICALEPCS2019-TUAPP05
[n] W. Vigano, B. Dehning, E. Effinger, G. G. Venturini, and C. Zamantzas, “Comparison of Three Different Concepts of High Dynamic Range and Dependability Optimised Current Measurement Digitisers for Beam Loss Systems”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA09, pp. 66-70.
[n] A. V. Higuera and J. R. Cary, “Integrating the Lorentz Force Law for Highly-Relativistic Particle-in-Cell Simulations”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4734-4736. doi:10.18429/JACoW-IPAC2018-THPML042
[n] W. Radloff and M. Wendt, “Beam Monitors for the S-Band Test Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC09, pp. 2616-2618.
[n] R. Pakter and C. Davidson, “Analysis of Phase Space Structure for Matched Intense Charged-Particle Beams in Periodic Focusing Transport Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP161, pp. 1875-1877.
[n] J. Rank, D. A. Harder, G. Rakowsky, and T. Tanabe, “Design Concept for a Modular In-vacuum Hall Probe Mapper for use with CPMU Convertible In-vacuum Undulators of Varying Magnetic Length”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP218, pp. 2534-2536.
[n] K. Hosoyama et al., “Superconducting Crab Cavity for KEKB”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D064, pp. 828-830.
[n] M. A. Drury et al., “Performance of the First Refurbished CEBAF Cryomodule”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS059, pp. 2478-2480.
[n] F. Tao and K. W. Belt, “Dynamic System Reliability Modelling of SLAC's Radiation Safety Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 559. doi:10.18429/JACoW-ICALEPCS2019-MOPHA141
[n] J. Zhu, M. H. Fang, J. Wang, and Z. Y. Wei, “Timing Window and Optimization for Position Resolution and Energy Calibration of Scintillation Detector”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 123-126. doi:10.18429/JACoW-IBIC2016-MOPG36
[n] M. Kuriki, “Energy Spread Compensation in Arbitrary Format Multi-Bunch Acceleration With Standing Wave and Traveling Wave Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 307-310. doi:10.18429/JACoW-IPAC2018-MOPMF076
[n] M. Di Castro, M. L. Baiguera Tambutti, S. S. Gilardoni, R. Losito, G. Lunghi, and A. Masi, “LHC Train Control System for Autonomous Inspections and Measurements”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1507-1511. doi:10.18429/JACoW-ICALEPCS2017-THPHA061
[n] B. Faatz, J. Pflueger, and Y. Li, “Magnet Sorting for the European XFEL Hybrid Undulator - Comparing Study”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH005, pp. 326-329.
[n] B. Fernandez Adiego et al., “Applying Model Checking to Critical PLC Applications: An ITER Case Study”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1792-1796. doi:10.18429/JACoW-ICALEPCS2017-THPHA161
[n] V. G. Dudnikov, G. Dudnikova, R. P. Johnson, M. P. Stockli, and R. F. Welton, “H- Ion Sources for High Intensity Proton Drivers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP036, pp. 435-437.
[n] C. Zanoni et al., “The Crab Cavities Cryomodule for SPS Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1081-1084. doi:10.18429/JACoW-IPAC2017-MOPVA096
[n] H. Tian et al., “New Progress with HF-free Chemical Finishing for Nb SRF Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 431-434. doi:10.18429/JACoW-LINAC2018-TUPO043
[n] E. Renner et al., “Optimization of the FCC-hh Beam Extraction System Regarding Failure Avoidance and Mitigation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 850-853. doi:10.18429/JACoW-IPAC2018-TUPAF058
[n] D. Olsson, F. Curbis, E. Mansten, S. Thorin, and S. Werin, “Transverse RF Deflecting Structures for the MAX IV LINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3684-3687. doi:10.18429/JACoW-IPAC2018-THPAL027
[n] J. Dale and A. Reichold, “Simulation of the Alignment of Linear Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP068, pp. 3361-3363.
[n] G. Decker, S. G. Arutunian, M. R. Mailian, and I. E. Vasiniuk, “Hard X-Ray Synchrotron Radiation Measurements at the APS with Vibrating Wire Monitors”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOVTC02, pp. 36-40.
[n] H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
[n] F. Herfurth et al., “The Low Energy Storage Ring CRYRING@ESR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM1HA01, pp. 189-191.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 687-690.
- G. B. Christian et al., “PandABlocks - a Flexible Framework for Zynq7000-Based SoC Configuration”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 683.
- W. Vigano, B. Dehning, E. Effinger, G. G. Venturini, and C. Zamantzas, “Comparison of Three Different Concepts of High Dynamic Range and Dependability Optimised Current Measurement Digitisers for Beam Loss Systems”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA09, pp. 66-70.
- A. V. Higuera and J. R. Cary, “Integrating the Lorentz Force Law for Highly-Relativistic Particle-in-Cell Simulations”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4734-4736.
- W. Radloff and M. Wendt, “Beam Monitors for the S-Band Test Facility”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC09, pp. 2616-2618.
- R. Pakter and C. Davidson, “Analysis of Phase Space Structure for Matched Intense Charged-Particle Beams in Periodic Focusing Transport Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP161, pp. 1875-1877.
- J. Rank, D. A. Harder, G. Rakowsky, and T. Tanabe, “Design Concept for a Modular In-vacuum Hall Probe Mapper for use with CPMU Convertible In-vacuum Undulators of Varying Magnetic Length”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP218, pp. 2534-2536.
- K. Hosoyama et al., “Superconducting Crab Cavity for KEKB”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D064, pp. 828-830.
- M. A. Drury et al., “Performance of the First Refurbished CEBAF Cryomodule”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS059, pp. 2478-2480.
- F. Tao and K. W. Belt, “Dynamic System Reliability Modelling of SLAC's Radiation Safety Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 559.
- J. Zhu, M. H. Fang, J. Wang, and Z. Y. Wei, “Timing Window and Optimization for Position Resolution and Energy Calibration of Scintillation Detector”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 123-126.
- M. Kuriki, “Energy Spread Compensation in Arbitrary Format Multi-Bunch Acceleration With Standing Wave and Traveling Wave Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 307-310.
- M. Di Castro, M. L. Baiguera Tambutti, S. S. Gilardoni, R. Losito, G. Lunghi, and A. Masi, “LHC Train Control System for Autonomous Inspections and Measurements”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1507-1511.
- B. Faatz, J. Pflueger, and Y. Li, “Magnet Sorting for the European XFEL Hybrid Undulator - Comparing Study”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH005, pp. 326-329.
- B. Fernandez Adiego et al., “Applying Model Checking to Critical PLC Applications: An ITER Case Study”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1792-1796.
- V. G. Dudnikov, G. Dudnikova, R. P. Johnson, M. P. Stockli, and R. F. Welton, “H- Ion Sources for High Intensity Proton Drivers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP036, pp. 435-437.
- C. Zanoni et al., “The Crab Cavities Cryomodule for SPS Test”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1081-1084.
- H. Tian et al., “New Progress with HF-free Chemical Finishing for Nb SRF Cavities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 431-434.
- E. Renner et al., “Optimization of the FCC-hh Beam Extraction System Regarding Failure Avoidance and Mitigation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 850-853.
- D. Olsson, F. Curbis, E. Mansten, S. Thorin, and S. Werin, “Transverse RF Deflecting Structures for the MAX IV LINAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3684-3687.
- J. Dale and A. Reichold, “Simulation of the Alignment of Linear Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP068, pp. 3361-3363.
- G. Decker, S. G. Arutunian, M. R. Mailian, and I. E. Vasiniuk, “Hard X-Ray Synchrotron Radiation Measurements at the APS with Vibrating Wire Monitors”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper MOVTC02, pp. 36-40.
- H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
- F. Herfurth et al., “The Low Energy Storage Ring CRYRING@ESR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THPM1HA01, pp. 189-191.
Back to search