Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. D. Nelson, Y. J. Chen, T. Fessenden, and C. Holmes, “High current precision long pulse electron beam position monitor”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT15, pp. XX-XX.
[n] J. F. Amundson, P. Spentzouris, and E. G. Stern, “Simulation Studies of the Interplay Between Space-Charge and Impedance Effects of the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA08, pp. 69-71.
[n] W. A. Barletta, D. B. Cline, and C. Pellegrini, “High Luminosity BB Factories Using Novel Techniques”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 395-398.
[n] L. Perrot and H. Cherif, “Beam Dynamic into the Transfer RIB Lines to the DESIR Facility at GANIL-SPIRAL2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 806-808. doi:10.18429/JACoW-IPAC2014-MOPRI084
[n] M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
[n] M. Ünal, R. Panas, A. Wawrzyniak, and W. Wiatrowska, “Tune Compensation for Insertion Devices Motion at the SOLARIS Storage Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6116, unpublished.
[n] M. Grieser et al., “Status of the REX-ISOLDE Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA30, pp. 1955-1957.
[n] R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 913-915. doi:10.18429/JACoW-IPAC2018-TUPAF078
[n] J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783.
[n] T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421.
[n] F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 293-296. doi:10.18429/JACoW-IBIC2019-TUPP007
[n] A. Lombardi, W. Pirkl, and Y. Bylinsky, “RFQD: A 'Decelerating' Radiofrequency Quadrupole for the CERN Antiproton Facility”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD05, pp. 554-556.
[n] M. Apollonio et al., “Beam dynamics studies for the Max 4U lattices”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2115, unpublished.
[n] V. Chimenti, A. Clozza, H. Hsieh, and C. Vaccarezza, “DAPhiNE Vacuum System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1561-1564.
[n] Y. F. Sui, J. S. Cao, H. Z. Ma, Q. Ye, and J. Yue, “Design and Simulation of Beam Position Monitor for the CADS Injector I Proton Linac”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC17, pp. 710-712.
[n] K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 992-994. doi:10.18429/JACoW-ICALEPCS2015-WEPGF122
[n] J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
[n] G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2271-2274.
[n] K. Buerkmann-Gehrlein et al., “Status of the Metrology Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS014, pp. 3299-3301.
[n] J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182.
[n] L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1142-1148. doi:10.18429/JACoW-ICALEPCS2017-THBPA02
[n] C. Jamet et al., “Beam Diagnostic Overview of the SPIRAL2 RNB Section”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD06, pp. 314-316.
[n] Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- S. D. Nelson, Y. J. Chen, T. Fessenden, and C. Holmes, “High current precision long pulse electron beam position monitor”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT15, pp. XX-XX.
- J. F. Amundson, P. Spentzouris, and E. G. Stern, “Simulation Studies of the Interplay Between Space-Charge and Impedance Effects of the Fermilab Main Injector”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA08, pp. 69-71.
- W. A. Barletta, D. B. Cline, and C. Pellegrini, “High Luminosity BB Factories Using Novel Techniques”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 395-398.
- L. Perrot and H. Cherif, “Beam Dynamic into the Transfer RIB Lines to the DESIR Facility at GANIL-SPIRAL2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 806-808.
- M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
- M. Ünal, R. Panas, A. Wawrzyniak, and W. Wiatrowska, “Tune Compensation for Insertion Devices Motion at the SOLARIS Storage Ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6116, this conference.
- M. Grieser et al., “Status of the REX-ISOLDE Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA30, pp. 1955-1957.
- R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 913-915.
- J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 778-783.
- T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421.
- F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 293-296.
- A. Lombardi, W. Pirkl, and Y. Bylinsky, “RFQD: A 'Decelerating' Radiofrequency Quadrupole for the CERN Antiproton Facility”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD05, pp. 554-556.
- M. Apollonio et al., “Beam dynamics studies for the Max 4U lattices”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2115, this conference.
- V. Chimenti, A. Clozza, H. Hsieh, and C. Vaccarezza, “DAPhiNE Vacuum System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1561-1564.
- Y. F. Sui, J. S. Cao, H. Z. Ma, Q. Ye, and J. Yue, “Design and Simulation of Beam Position Monitor for the CADS Injector I Proton Linac”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC17, pp. 710-712.
- K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 992-994.
- J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
- G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2271-2274.
- K. Buerkmann-Gehrlein et al., “Status of the Metrology Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS014, pp. 3299-3301.
- J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182.
- L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1142-1148.
- C. Jamet et al., “Beam Diagnostic Overview of the SPIRAL2 RNB Section”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD06, pp. 314-316.
- Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX.
Back to search