Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hahn, L. R. Hammons, and D. Naik, “Ferrite-lined HOM Absorber for the e-Cool ERL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS095, pp. 3705-3707.
[n] M. Guinchard et al., “Mechanical Strain Measurements Based on Fiber Bragg Grating Down to Cryogenic Temperature - R&D Study and Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2572-2574. doi:10.18429/JACoW-IPAC2018-WEPMF081
[n] J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 894-898.
[n] K. Yamamoto, “The Beam Collimator System of J-PARC Rapid Cycling Synchrotron”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC10, pp. 304-311.
[n] T. Hirono, T. Kudo, and T. Ohata, “Applications and Upgrading of Flexible and Logic-reconfigurable VME Board”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP061, pp. 221-223.
[n] H. Henke and O. Napoly, “Wake Fields Between Two Parallel Resistive Plates”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1046-1049.
[n] L. Egoriti et al., “Development of a Proton-to-Neutron Converter for Radioisotope Production at ISAC-TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3917-3920. doi:10.18429/JACoW-IPAC2018-THPAL117
[n] J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 399-402. doi:10.18429/JACoW-IPAC2021-MOPAB109
[n] M. Begg, D. Einfeld, and D. Tommassini, “The ELETTRA Transfer Line Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2372-2375.
[n] F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 823-827.
[n] J.-L. Lemaire, P.-Y. Beauvais, P.-A. Chamouard, and R. Ferdinand, “Recent Performance of the LNS Four-Rod RFQ2 Acceleration of Gold and Xenon Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-11, pp. 719-721.
[n] Y. V. Bylinsky et al., “High Power Test of the ISAC Triple Gap Buncher Operating in CW Mode.”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP95, pp. 893-895.
[n] P. Berkvens, B. Gremont, P. Letellier, and S. Sierra, “First Beam Results of the ESRF Preinjector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 510-512.
[n] M. N. El-Shazly, M. V. Khabarov, A. I. Ivanenko, and G. G. Gulbekian, “Vacuum Beam Losses in the Axial Injection Systems of the FLNR Heavy Ion Cyclotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P010, pp. 3607-3609.
[n] J. Haimson and B. Mecklenburg, “A CW Non-Synchronous Traveling Wave Structure for a 300 Me V Pulse Stretcher Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1919-1921.
[n] G. E. McMichael and B. G. Chidley, “Beam Dynamics Studies of High Current RFQ and DTL Tanks”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E01, pp. 149-152.
[n] S. Schneider and P. G. Molteno, “The Beam Phase Measurement System for the Cyclotrons and Beamlines at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J21, pp. 411-414.
[n] S. L. Bogomolov et al., “Present Status of FLNR (JINR) ECR Ion Sources”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOBK02, pp. 17-19.
[n] L. Zwalinski et al., “ATLAS Baby-DEMO CO2 Cooling Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA171, pp. XX-XX.
[n] G. M. Arbique, B. G. Chidley, W. L. Michel, and B. H. Smith, “Optical Beam Sensors for RFQ1-1250”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-18, pp. 654-656.
[n] A. Drago et al., “Commissioning of the BESSY-II Longitudinal Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A06, pp. 1903-1905.
[n] J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58.
[n] O. Belikov, A. Chernyakin, V. Kozak, and A. Medvedko, “BYPASS SYSTEM FOR SHUNTING OF ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RINGS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH09, pp. XX-XX.
[n] A. M. Donyagin, A. Kovalenko, O. S. Kozlov, V. A. Mikhailov, V. A. Shchepunov, and A. Smirnov, “Preliminary Analysis of the Nuclotron Magnetic Field”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP077G, pp. 2281-2283.
[n] H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1304, unpublished.
[n] W. Le Coz, T. A. Andre, C. Doutresssoulles, C. Jamet, and S. Loret, “SPIRAL2 Beam Energy Measurement”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD92, pp. 524-526.
[n] E. Shubin, V. V. Kolmogorov, and A. S. Styuf, “High Power Solid State RF Generator for Neutral Beam Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 276-278. doi:10.18429/JACoW-RUPAC2016-TUPSA029
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hahn, L. R. Hammons, and D. Naik, “Ferrite-lined HOM Absorber for the e-Cool ERL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS095, pp. 3705-3707.
- M. Guinchard et al., “Mechanical Strain Measurements Based on Fiber Bragg Grating Down to Cryogenic Temperature - R&D Study and Applications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2572-2574.
- J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 894-898.
- K. Yamamoto, “The Beam Collimator System of J-PARC Rapid Cycling Synchrotron”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC10, pp. 304-311.
- T. Hirono, T. Kudo, and T. Ohata, “Applications and Upgrading of Flexible and Logic-reconfigurable VME Board”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP061, pp. 221-223.
- H. Henke and O. Napoly, “Wake Fields Between Two Parallel Resistive Plates”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1046-1049.
- L. Egoriti et al., “Development of a Proton-to-Neutron Converter for Radioisotope Production at ISAC-TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3917-3920.
- J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 399-402.
- M. Begg, D. Einfeld, and D. Tommassini, “The ELETTRA Transfer Line Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2372-2375.
- F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 823-827.
- J.-L. Lemaire, P.-Y. Beauvais, P.-A. Chamouard, and R. Ferdinand, “Recent Performance of the LNS Four-Rod RFQ2 Acceleration of Gold and Xenon Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-11, pp. 719-721.
- Y. V. Bylinsky et al., “High Power Test of the ISAC Triple Gap Buncher Operating in CW Mode.”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP95, pp. 893-895.
- P. Berkvens, B. Gremont, P. Letellier, and S. Sierra, “First Beam Results of the ESRF Preinjector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 510-512.
- M. N. El-Shazly, M. V. Khabarov, A. I. Ivanenko, and G. G. Gulbekian, “Vacuum Beam Losses in the Axial Injection Systems of the FLNR Heavy Ion Cyclotrons”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P010, pp. 3607-3609.
- J. Haimson and B. Mecklenburg, “A CW Non-Synchronous Traveling Wave Structure for a 300 Me V Pulse Stretcher Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1919-1921.
- G. E. McMichael and B. G. Chidley, “Beam Dynamics Studies of High Current RFQ and DTL Tanks”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E01, pp. 149-152.
- S. Schneider and P. G. Molteno, “The Beam Phase Measurement System for the Cyclotrons and Beamlines at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J21, pp. 411-414.
- S. L. Bogomolov et al., “Present Status of FLNR (JINR) ECR Ion Sources”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOBK02, pp. 17-19.
- L. Zwalinski et al., “ATLAS Baby-DEMO CO2 Cooling Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA171, pp. XX-XX.
- G. M. Arbique, B. G. Chidley, W. L. Michel, and B. H. Smith, “Optical Beam Sensors for RFQ1-1250”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-18, pp. 654-656.
- A. Drago et al., “Commissioning of the BESSY-II Longitudinal Feedback System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A06, pp. 1903-1905.
- J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58.
- O. Belikov, A. Chernyakin, V. Kozak, and A. Medvedko, “BYPASS SYSTEM FOR SHUNTING OF ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RINGS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH09, pp. XX-XX.
- A. M. Donyagin, A. Kovalenko, O. S. Kozlov, V. A. Mikhailov, V. A. Shchepunov, and A. Smirnov, “Preliminary Analysis of the Nuclotron Magnetic Field”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP077G, pp. 2281-2283.
- H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1304, this conference.
- W. Le Coz, T. A. Andre, C. Doutresssoulles, C. Jamet, and S. Loret, “SPIRAL2 Beam Energy Measurement”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD92, pp. 524-526.
- E. Shubin, V. V. Kolmogorov, and A. S. Styuf, “High Power Solid State RF Generator for Neutral Beam Injector”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 276-278.
Back to search