JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	L. Hendrickson, N. Phinney, A. Seryi, P. Tenenbaum, and M. Woodley, “Beam-based Feedback for the NLC Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT157, pp. 2828-2830. 
[n]	A. D. Yeremian, D. J. McCormick, M. C. Ross, H. Hayano, and T. Naito, “KEK ATF Injector Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA47, pp. 1994-1996. 
[n]	P. Burrows et al., “Electromagnetic Background Tests for the ILC Interaction Point Feedback System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBAB01, pp. 1970-1972. 
[n]	F. Meot, S. J. Brooks, D. Trbojevic, and N. Tsoupas, “Validation of the Halbach FFAG Cell of Cornell-BNL Energy Recovery Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1304-1305. doi:10.18429/JACoW-IPAC2018-TUPMF024
[n]	M. J. Joung, H. J. Kim, A. M. Rowe, and M. Wong, “Hydrogen Degassing Study During the Heat Treatment of 1.3-GHz SRF Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC04, pp. 793-795. 
[n]	G. M. Wang, B. Holub, Y. Li, J. Rose, and T. V. Shaftan, “Characterization of the Longitudinal Acceptance in a Storage Ring with RF Pinger”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 497-499. doi:10.18429/JACoW-IPAC2017-MOPAB155
[n]	K. Bilko, M. Brugger, R. Garcia Alia, F. J. Harden, Y. Kadi, and O. Stein, “Detailed Analysis Of The Baseline Dose Levels And Localized Radiation Spikes In The Arc Sections Of The Large Hadron Collider During Run 2”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4009-4012. doi:10.18429/JACoW-IPAC2019-THPRB083
[n]	M. Bertucci, P. Michelato, L. Monaco, M. Moretti, C. Pagani, and A. Navitski, “Development of an X-Ray Fluorescence Probe for Inner Cavity Inspection”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB087, pp. 799-803. 
[n]	M. C. Ross, J. Frisch, H. Hayano, and D. McCormick, “RF Cavity BPM's as Beam Angle and Beam Correlation Monitors”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB062, pp. 2548-2550. 
[n]	O. Stein et al., “Run 2 Prompt Dose Distribution and Evolution at the Large Hadron Collider and Implications for Future Accelerator Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4013-4015. doi:10.18429/JACoW-IPAC2019-THPRB084
[n]	T. Summers, D. Chabot, L. O. Dallin, and M. J. Sigrist, “Orbit Improvements at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP018, pp. 1129-1131. 
[n]	M. W. Bruker et al., “Electron Cooling using a Pulsed and Dithering beam from an Electrostatic Electron Cooler”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P1008, pp. 81-84. 
[n]	D. Trines, “TESLA Project Overview”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA003, pp. 605-609. 
[n]	E. Nebot Del Busto et al., “Monte Carlo Simulations of Beam Losses in the Test Beam Line of CTF3”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC47, pp. 189-192. 
[n]	S. Schuchman, “National Synchrotron Light Source VUV Storage Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3842-3845. 
[n]	S. Ikeda, M. R. Costanzo, T. Kanesue, R. F. Lambiase, C. J. Liaw, and M. Okamura, “Control of Laser Ablation Plasma by Pulsed Magnetic Field for Heavy Ion Beam Production”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB28, pp. 259-261. 
[n]	J. Carter et al., “Simulation of the ILC Collimation System Using BDSIM, MARS15 and STRUCT”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS082, pp. 744-746. 
[n]	M. Blaskiewicz, J. M. Brennan, and J. Wei, “Stochastic Cooling Studies in RHIC, II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT171, pp. 2861-2863. 
[n]	R. Ainsworth and S. Molloy, “Studies of Parasitic Cavity Modes for Proposed ESS Linac Lattices”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB052, pp. 591-593. 
[n]	T. Kamps et al., “Beam Profile Measurements at PETRA with the Laserwire Compton Scattering Monitor”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT026, pp. 2529-2531. 
[n]	H. Matsumoto et al., “Operation of the C-Band 50 MW Klystron with Smart Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D030, pp. 157-159. 
[n]	Y. Luo et al., “Dynamic Aperture Evaluation at the Current Working Point for RHIC Polarized Proton Operation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS111, pp. 4363-4365. 
[n]	P. Tenenbaum, D. Schulte, A. Seryi, N. J. Walker, G. R. White, and M. Woodley, “Start to End Simulations of Low Emittance Tuning and Stabilization”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOZCH02, pp. 31-35. 
[n]	R. Ainsworth and S. Molloy, “Studies of Parasitic Cavity Modes for Proposed ESS Linac Lattices”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB018, pp. 47-49. 
[n]	C. Serpico, M. Dal Forno, and A. Fabris, “Optimization of the SLED Phase Modulation Parameters of the FERMI Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA01, pp. 981-983. 
[n]	B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992. 
[n]	H. Burkhardt, “ELFE at CERN”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA005, pp. 602-604. 
[n]	S. Kowalski, “CW Electron Accelerators: A Review”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1-7. 
[n]	G. Campogiani and Y. Papaphilippou, “Beam Dynamics Studies to Develop a High-energy Luminosity Model for the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 233-235. doi:10.18429/JACoW-IPAC2015-MOPWA050
[n]	R. Niemczyk et al., “Proof-of-Principle Tests for Slit-scan-based Slice Emittance Measurements at PITZ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 553-556. doi:10.18429/JACoW-LINAC2018-TUPO098
[n]	M. E. Biagini, C. Biscari, E. Gianfelice, S. Guiducci, L. Palumbo, and M. Preger, “Lattice Studies for the Trieste Synchrotron Radiation Machine”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 500-503. 
[n]	Y. Han, L. Ma, A. Latina, and D. Schulte, “First Start-to-End BBA Results in the CLIC RTML”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3841-3843. doi:10.18429/JACoW-IPAC2016-THPOR029
[n]	H. J. Kim et al., “SUPERCONDUCTING LINAC FOR THE RISP”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP008, pp. 89-91. 
[n]	T. V. Shaftan et al., “Progress with NSLS-II Injection Straight Section Design”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP216, pp. 2528-2530. 
[n]	M. Sapinski et al., “LHC Magnet Quench Test with Beam Loss Generated by Wire Scan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC173, pp. 2391-2393. 
[n]	H. Padamsee, “SRF for Muon Colliders”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA006, pp. 587-592. 
[n]	D. Alesini et al., “Design, realization and high power RF test of the new brazed free C band photo-gun”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2929-2932. doi:10.18429/JACoW-IPAC2024-THAN1
[n]	S. Guiducci, “Background Calculation for the DAFNE Experiments”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP040G, pp. 1365-1367. 
[n]	R. Pan et al., “Electro-0ptical Bunch Profile Measurement at CTF3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME077, pp. 658-660. 
[n]	U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Studies of Electropolishing and Oxypolishing Treated Diffusion Coated Nb3Sn Surfaces”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3954-3957. doi:10.18429/JACoW-IPAC2018-THPAL131
[n]	Y. Kim et al., “Low Thermal Emittance Measurements at the PSI-XFEL Low Emittance Gun Test Facility”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH055, pp. 110-113. 
[n]	T. Summers et al., “Implementing CS-Studio at ReA3”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1887-1889. doi:10.18429/JACoW-ICALEPCS2017-THPHA190
[n]	M. J. de Loos and S. B. van der Geer, “General Particle Tracer: A 3D Code for Accelerator and Beam Line Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP18F, pp. 1245-1247. 
[n]	A. Kurup et al., “The Muon Linac for the International Design Study for the Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ009, pp. 838-840. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search