Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Grigoryan et al., “Status of AREAL RF Photogun Test Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 620-623. doi:10.18429/JACoW-IPAC2014-MOPRI017
[n] Z. Wu, E. Adli, A. S. Fisher, M. J. Hogan, and H. Loos, “First Measurements of the FACET Coherent Terahertz Radiation Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB009, pp. 1134-1136.
[n] C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
[n] S. A. Veitzer, P. Stoltz, J. A. Crittenden, and K. G. Sonnad, “3-Dimensional Modeling of Electron Clouds in Non-uniform Magnetic Fields”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAA01, pp. 1059-1061.
[n] F. S. Carlier, J. M. Coello de Portugal, E. H. Maclean, T. Persson, and R. Tomas, “Observations of Resonance Driving Terms in the LHC during Runs I and II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3468-3471. doi:10.18429/JACoW-IPAC2016-THPMR037
[n] J. R. Calvey et al., “Update on Electron Cloud Mitigation Studies at Cesr-TA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS083, pp. 796-798.
[n] R. Schmidt, T. Baer, J. Wenninger, D. Wollmann, and M. Zerlauth, “Machine Protection Challenges for HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1039-1042. doi:10.18429/JACoW-IPAC2014-TUPRO016
[n] A. Peters, R. Cee, Th. Haberer, and T. Winkelmann, “The HIT Accelerator as Part of a Medical Product: Impacts on the Maintenance Strategy”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA005, pp. 3639-3641.
[n] A. Jeff et al., “First Measurement Results of the LHC Longitudinal Density Monitor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC048, pp. 1105-1107.
[n] S. D. Webb et al., “Simulating High-Intensity Proton Beams in Nonlinear Lattices with PyORBIT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR012, pp. 2961-2963.
[n] B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3321-3323. doi:10.18429/JACoW-IPAC2015-WEPTY026
[n] M. P. Crouch, R. Appleby, B. D. Muratori, and T. Pieloni, “Possible Beam-beam and Levelling Scenarios for HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1071-1073. doi:10.18429/JACoW-IPAC2014-TUPRO026
[n] M. Eshraqi, R. De Prisco, R. Miyamoto, E. Sargsyan, and H. D. Thomsen, “Statistical Error Studies in the ESS Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3323-3325. doi:10.18429/JACoW-IPAC2014-THPME044
[n] H. Caracciolo et al., “Beam Diagnostics Commissioning at CNAO”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOAA01, pp. 2848-2850.
[n] D. J. Holder, A. F. Green, and H. L. Owen, “A Compact Superconducting 330 MeV Proton Gantry for Radiotherapy and Computed Tomography”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2202-2204. doi:10.18429/JACoW-IPAC2014-WEPRO101
[n] Y.-S. Cho et al., “Installation of 100-MeV Proton Linac for PEFP”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP043, pp. 3832-3834.
[n] W. M. Daqa, I. Hofmann, and J. Struckmeier, “Skew Quadrupole Effects on Multi-turn injection Efficiency in the SIS18”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS033, pp. 3490-3492.
[n] H. Shimizu, Y. Higashi, Y. Honda, and J. Urakawa, “Stable Planner Type Four-mirror Cavity Development for X-ray Production as Basic Development of Quantum Beam Technology Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO012, pp. 1470-1472.
[n] D. Wang et al., “CEPC Parameter Choice and Partial Double Ring Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3788-3790. doi:10.18429/JACoW-IPAC2016-THPOR010
[n] Z. Insepov, B. W. Adams, J. Norem, and V. Ivanov, “Simulations of Fast X-ray Detectors Based on Multichannel Plates”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR067, pp. 939-941.
[n] M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
[n] S. Montesano and W. Scandale, “Apparatus and Experimental Procedures to Test Crystal Collimation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB011, pp. 3254-3256.
[n] C. Wiesner et al., “Experimental Performance of an EB Chopper System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3244-3246. doi:10.18429/JACoW-IPAC2014-THPME015
[n] R. De Maria, “Parametric Study of Optics Options for the HL-LHC Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC010, pp. 142-144.
[n] K. E. Deitrick, J. R. Delayen, B. R. P. Gamage, G. A. Krafft, and T. Satogata, “Progress on a Compact Accelerator Design for a Compton Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1706-1708. doi:10.18429/JACoW-IPAC2015-TUPJE041
[n] E. Chesta et al., “Overview of CERN Technology Transfer Strategy and Accelerator-related Activities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA034, pp. 3702-3704.
[n] G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Evaluation of the NEG Coating Saturation Level after 3 Years of LHC Beam Operation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI049, pp. 3397-3399.
[n] G. Du, B. L. Qian, and H. Wang, “The Motion of an Electron in the Periodic Cusped Magnetic Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC071, pp. 2184-2186.
[n] H. Geng et al., “Lattice and its Related Beam Dynamics Issues in the CEPC Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2469-2471. doi:10.18429/JACoW-IPAC2015-WEBB3
[n] A. Kurup, “An Automated Conditioning System for the MUCOOL Experiments at Fermilab”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ011, pp. 844-846.
[n] S. Artinian, J. F. Bergoz, F. Stulle, P. Pollet, and V. Schlott, “Goubau Line and Beam Characterization of TURBO-ICT for SwissFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME005, pp. 476-478.
[n] F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. XX-XX. doi:10.18429/JACoW-IPAC2014-MOXAA01
For LaTeX
Use Complete Form
For BibTeX
References
- B. Grigoryan et al., “Status of AREAL RF Photogun Test Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 620-623.
- Z. Wu, E. Adli, A. S. Fisher, M. J. Hogan, and H. Loos, “First Measurements of the FACET Coherent Terahertz Radiation Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUEPPB009, pp. 1134-1136.
- C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
- S. A. Veitzer, P. Stoltz, J. A. Crittenden, and K. G. Sonnad, “3-Dimensional Modeling of Electron Clouds in Non-uniform Magnetic Fields”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAA01, pp. 1059-1061.
- F. S. Carlier, J. M. Coello de Portugal, E. H. Maclean, T. Persson, and R. Tomas, “Observations of Resonance Driving Terms in the LHC during Runs I and II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3468-3471.
- J. R. Calvey et al., “Update on Electron Cloud Mitigation Studies at Cesr-TA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS083, pp. 796-798.
- R. Schmidt, T. Baer, J. Wenninger, D. Wollmann, and M. Zerlauth, “Machine Protection Challenges for HL-LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1039-1042.
- A. Peters, R. Cee, Th. Haberer, and T. Winkelmann, “The HIT Accelerator as Part of a Medical Product: Impacts on the Maintenance Strategy”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA005, pp. 3639-3641.
- A. Jeff et al., “First Measurement Results of the LHC Longitudinal Density Monitor”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC048, pp. 1105-1107.
- S. D. Webb et al., “Simulating High-Intensity Proton Beams in Nonlinear Lattices with PyORBIT”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR012, pp. 2961-2963.
- B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3321-3323.
- M. P. Crouch, R. Appleby, B. D. Muratori, and T. Pieloni, “Possible Beam-beam and Levelling Scenarios for HL-LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1071-1073.
- M. Eshraqi, R. De Prisco, R. Miyamoto, E. Sargsyan, and H. D. Thomsen, “Statistical Error Studies in the ESS Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3323-3325.
- H. Caracciolo et al., “Beam Diagnostics Commissioning at CNAO”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THOAA01, pp. 2848-2850.
- D. J. Holder, A. F. Green, and H. L. Owen, “A Compact Superconducting 330 MeV Proton Gantry for Radiotherapy and Computed Tomography”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2202-2204.
- Y.-S. Cho et al., “Installation of 100-MeV Proton Linac for PEFP”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP043, pp. 3832-3834.
- W. M. Daqa, I. Hofmann, and J. Struckmeier, “Skew Quadrupole Effects on Multi-turn injection Efficiency in the SIS18”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS033, pp. 3490-3492.
- H. Shimizu, Y. Higashi, Y. Honda, and J. Urakawa, “Stable Planner Type Four-mirror Cavity Development for X-ray Production as Basic Development of Quantum Beam Technology Program”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO012, pp. 1470-1472.
- D. Wang et al., “CEPC Parameter Choice and Partial Double Ring Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3788-3790.
- Z. Insepov, B. W. Adams, J. Norem, and V. Ivanov, “Simulations of Fast X-ray Detectors Based on Multichannel Plates”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR067, pp. 939-941.
- M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
- S. Montesano and W. Scandale, “Apparatus and Experimental Procedures to Test Crystal Collimation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB011, pp. 3254-3256.
- C. Wiesner et al., “Experimental Performance of an EB Chopper System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3244-3246.
- R. De Maria, “Parametric Study of Optics Options for the HL-LHC Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC010, pp. 142-144.
- K. E. Deitrick, J. R. Delayen, B. R. P. Gamage, G. A. Krafft, and T. Satogata, “Progress on a Compact Accelerator Design for a Compton Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1706-1708.
- E. Chesta et al., “Overview of CERN Technology Transfer Strategy and Accelerator-related Activities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA034, pp. 3702-3704.
- G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Evaluation of the NEG Coating Saturation Level after 3 Years of LHC Beam Operation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI049, pp. 3397-3399.
- G. Du, B. L. Qian, and H. Wang, “The Motion of an Electron in the Periodic Cusped Magnetic Fields”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC071, pp. 2184-2186.
- H. Geng et al., “Lattice and its Related Beam Dynamics Issues in the CEPC Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2469-2471.
- A. Kurup, “An Automated Conditioning System for the MUCOOL Experiments at Fermilab”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ011, pp. 844-846.
- S. Artinian, J. F. Bergoz, F. Stulle, P. Pollet, and V. Schlott, “Goubau Line and Beam Characterization of TURBO-ICT for SwissFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME005, pp. 476-478.
- F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. XX-XX.
Back to search