Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Yamamoto et al., “Longitudinal Beam Dynamics on 3 GeV PS in JAERI-KEK Joint Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE005, pp. 1073-1075.
[n] B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3630-3633. doi:10.18429/JACoW-IPAC2015-WEPWI060
[n] A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3465-3467. doi:10.18429/JACoW-IPAC2014-THPME097
[n] S. De Santis, M. G. Billing, B. T. Carlson, M. A. Palmer, and J. P. Sikora, “TE Wave Measurements of the Electron Cloud in the Cesr-TA Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE088, pp. 1188-1190.
[n] J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684.
[n] M. P. Crouch, R. B. Appleby, and B. D. Muratori, “Analytical Approach to the Beam-Beam Interaction with the Hourglass Effect”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 510-513. doi:10.18429/JACoW-IPAC2015-MOPJE082
[n] K. U. Kasemir and L. R. Dalesio, “Overview of the Experimental Physics and Industrial Control System Channel Archiver”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP019, pp. XX-XX.
[n] S. T. Boogert et al., “Cavity Beam Position Monitor System for ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE070, pp. 1140-1142.
[n] J. A. Crittenden et al., “Investigation into Electron Cloud Effects in the ILC Damping Ring Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR063, pp. 1963-1965.
[n] S. Molloy and E. Tanke, “DYNAC: Extensions, Updates, and Upgrades”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3784-3786. doi:10.18429/JACoW-IPAC2017-THPAB038
[n] E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634.
[n] M. Cornacchia, S. Di Mitri, G. Penco, and A. Zholents, “Formation of Electron Bunches for Harmonic Cascade X-ray Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOPA01, pp. 2738-2740.
[n] A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “TM01 Mode Launcher for Use in High Brightness Photoguns”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 491-493. doi:10.18429/JACoW-IPAC2016-MOPMW039
[n] S. Guiducci et al., “Updates to the International Linear Collider Damping Rings Baseline Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOOCA03, pp. 32-34.
[n] C. Montag et al., “RHIC Performance during the 7.5 GeV Low Energy Run in FY 2014”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1087-1089. doi:10.18429/JACoW-IPAC2014-TUPRO031
[n] V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2463-2465. doi:10.18429/JACoW-IPAC2016-WEPMW019
[n] S. M. Lidia et al., “FRIB Machine Protection System Design and Validation Studies”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 221-225. doi:10.18429/JACoW-IBIC2015-MOPB070
[n] J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971.
[n] X. Wu et al., “End-to-end Beam Simulations for the C-ADS Injector II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA059, pp. 1838-1840.
[n] Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, and Y. Zhang, “Dynamic Aperture of JLEIC Electron Collider Ring with Errors and Correction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1920-1923. doi:10.18429/JACoW-IPAC2019-TUPRB113
[n] C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4234-4236. doi:10.18429/JACoW-IPAC2016-THPOY057
[n] A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 652-655. doi:10.18429/JACoW-IPAC2016-MOPOR023
[n] M. Benedikt, S. Hancock, and M. Lindroos, “Base Line Design for a Beta-beam Neutrino Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT007, pp. 542-544.
[n] M. Schaumann, J. M. Jowett, B. Salvant, M. Wendt, M. Blaskiewicz, and S. Verd??-Andr?®s, “Studies on Stochastic Cooling of Heavy Ions in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1030-1032. doi:10.18429/JACoW-IPAC2014-TUPRO013
[n] D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960.
[n] H. Huang et al., “Overcoming the Horizontal Depolarizing Resonance in the Brookhaven AGS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2112-2114. doi:10.18429/JACoW-IPAC2014-WEPRO070
[n] V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
[n] O. Etisken, F. Antoniou, Y. Papaphilippou, T. Tydecks, and A. K. ?çift?ºi, “Updates on Alternative Pre-Booster Ring Design and Wiggler Magnet Considerations of SPS for the FCC e?e? Injector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1094-1097. doi:10.18429/JACoW-IPAC2019-MOPTS097
[n] T. Suwada and M. Satoh, “New Laser-Based Alignment System for the 500-m-long KEK Electron/Positron Injector Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB057, pp. 2821-2823.
[n] V. Previtali, G. Stancari, A. Valishev, and S. Redaelli, “Numerical Simulations of a Hollow Electron Lens as a Scraping Device for the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO044, pp. 993-995.
[n] M. Lindroos, H. Danared, C. Darve, D. P. McGinnis, and S. Molloy, “The ESS Linac Design”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TH2A01, pp. 768-772.
[n] K. U. Kasemir and L. R. Dalesio, “Integrating LabVIEW into a Distributed Computing Environment”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP032, pp. XX-XX.
[n] B. Goddard et al., “Controlling Beamloss at Injection into the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS055, pp. 3553-3555.
[n] L. Lari et al., “A Planning and Scheduling System for the ESS Accelerator Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3867-3869. doi:10.18429/JACoW-IPAC2015-THPF079
[n] M. P. Crouch, R. B. Appleby, and B. D. Muratori, “Strong-Strong Simulations of Beta star Levelling for Flat and Round Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2192-2195. doi:10.18429/JACoW-IPAC2015-TUPTY070
[n] P. K. Skowronski et al., “Design of Phase Feed Forward System in CTF3 and Performance of Fast Beam Phase Monitors”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOBB203, pp. 2097-2099.
[n] J. H. Ko, I. S. Ko, S. H. Jung, H.-S. Kang, and J. Park, “Electron Bunch Length Measurement Using Coherent Radiation Source of fs-THz accelerator at Pohang Accelerator Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 235-237. doi:10.18429/JACoW-IPAC2016-MOPMR003
[n] R. P. Wells, J. Corlett, and A. Zholents, “Re-Circulating Linac Vacuum System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE031, pp. 812-814.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Yamamoto et al., “Longitudinal Beam Dynamics on 3 GeV PS in JAERI-KEK Joint Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE005, pp. 1073-1075.
- B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3630-3633.
- A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3465-3467.
- S. De Santis, M. G. Billing, B. T. Carlson, M. A. Palmer, and J. P. Sikora, “TE Wave Measurements of the Electron Cloud in the Cesr-TA Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE088, pp. 1188-1190.
- J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684.
- M. P. Crouch, R. B. Appleby, and B. D. Muratori, “Analytical Approach to the Beam-Beam Interaction with the Hourglass Effect”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 510-513.
- K. U. Kasemir and L. R. Dalesio, “Overview of the Experimental Physics and Industrial Control System Channel Archiver”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP019, pp. XX-XX.
- S. T. Boogert et al., “Cavity Beam Position Monitor System for ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE070, pp. 1140-1142.
- J. A. Crittenden et al., “Investigation into Electron Cloud Effects in the ILC Damping Ring Design”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR063, pp. 1963-1965.
- S. Molloy and E. Tanke, “DYNAC: Extensions, Updates, and Upgrades”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3784-3786.
- E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634.
- M. Cornacchia, S. Di Mitri, G. Penco, and A. Zholents, “Formation of Electron Bunches for Harmonic Cascade X-ray Free Electron Lasers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOPA01, pp. 2738-2740.
- A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “TM01 Mode Launcher for Use in High Brightness Photoguns”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 491-493.
- S. Guiducci et al., “Updates to the International Linear Collider Damping Rings Baseline Design”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOOCA03, pp. 32-34.
- C. Montag et al., “RHIC Performance during the 7.5 GeV Low Energy Run in FY 2014”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1087-1089.
- V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2463-2465.
- S. M. Lidia et al., “FRIB Machine Protection System Design and Validation Studies”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 221-225.
- J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971.
- X. Wu et al., “End-to-end Beam Simulations for the C-ADS Injector II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA059, pp. 1838-1840.
- Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, and Y. Zhang, “Dynamic Aperture of JLEIC Electron Collider Ring with Errors and Correction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1920-1923.
- C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4234-4236.
- A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 652-655.
- M. Benedikt, S. Hancock, and M. Lindroos, “Base Line Design for a Beta-beam Neutrino Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT007, pp. 542-544.
- M. Schaumann, J. M. Jowett, B. Salvant, M. Wendt, M. Blaskiewicz, and S. Verd??-Andr?®s, “Studies on Stochastic Cooling of Heavy Ions in the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1030-1032.
- D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960.
- H. Huang et al., “Overcoming the Horizontal Depolarizing Resonance in the Brookhaven AGS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2112-2114.
- V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
- O. Etisken, F. Antoniou, Y. Papaphilippou, T. Tydecks, and A. K. ?çift?ºi, “Updates on Alternative Pre-Booster Ring Design and Wiggler Magnet Considerations of SPS for the FCC e?e? Injector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1094-1097.
- T. Suwada and M. Satoh, “New Laser-Based Alignment System for the 500-m-long KEK Electron/Positron Injector Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB057, pp. 2821-2823.
- V. Previtali, G. Stancari, A. Valishev, and S. Redaelli, “Numerical Simulations of a Hollow Electron Lens as a Scraping Device for the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO044, pp. 993-995.
- M. Lindroos, H. Danared, C. Darve, D. P. McGinnis, and S. Molloy, “The ESS Linac Design”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TH2A01, pp. 768-772.
- K. U. Kasemir and L. R. Dalesio, “Integrating LabVIEW into a Distributed Computing Environment”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP032, pp. XX-XX.
- B. Goddard et al., “Controlling Beamloss at Injection into the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS055, pp. 3553-3555.
- L. Lari et al., “A Planning and Scheduling System for the ESS Accelerator Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3867-3869.
- M. P. Crouch, R. B. Appleby, and B. D. Muratori, “Strong-Strong Simulations of Beta star Levelling for Flat and Round Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2192-2195.
- P. K. Skowronski et al., “Design of Phase Feed Forward System in CTF3 and Performance of Fast Beam Phase Monitors”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEOBB203, pp. 2097-2099.
- J. H. Ko, I. S. Ko, S. H. Jung, H.-S. Kang, and J. Park, “Electron Bunch Length Measurement Using Coherent Radiation Source of fs-THz accelerator at Pohang Accelerator Laboratory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 235-237.
- R. P. Wells, J. Corlett, and A. Zholents, “Re-Circulating Linac Vacuum System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE031, pp. 812-814.
Back to search