Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Strehl and H. Vilhjalmsson, “The SIS-Beam Diagnostic System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1413-1416.
[n] L. Day, J. Power, and M. Stettler, “A Modular Interface between Custom PCI Instrumentation and Commercial Software”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP572, pp. XX-XX.
[n] G. C. Pappas, “Fast Kickers for the Next Generation Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD098, pp. 3329-3331.
[n] J. A. Uythoven et al., “Calibration Measurements of the LHC Beam Dumping System Extraction Kicker Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS015, pp. 1520-1522.
[n] G. P?Âplau, U. Van Rienen, M. J. de Loos, and S. B. van der Geer, “Progress in 3D Space-charge Calculations in the GPT Code”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT048, pp. 2592-2594.
[n] J. C. Amato, “Development of Higher Order Mode Couplers at Cornell”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E08, pp. XX-XX.
[n] C. D. P. Levy, W. M. Law, M. McDonald, and P. W. Schmor, “The TRIUMF Optically Pumped Polarized H-Ion Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 364-367.
[n] B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1402-1405.
[n] H. S. Kim, J. J. Dang, D.-H. Kim, H.-J. Kwon, S. Lee, and S. P. Yun, “Injector System Development for 1 MeV/n RFQ at KOMAC”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 615-617. doi:10.18429/JACoW-LINAC2022-TUPORI28
[n] M. Neroni et al., “Characterization of the longitudinal beam coupling impedance and mitigation strategy for the fast extraction kicker KFA79 in the CERN PS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3458-3461. doi:10.18429/JACoW-IPAC2023-WEPL150
[n] K. S. Lee, E. Tikhomolov, J. Richards, E. Klassen, and T. Tateyama, “TRIUMF Secondary Beam Line Control System Upgrade Using EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP580, pp. XX-XX.
[n] Yu. Zuev et al., “A 5 to 20 MeV Electron Linear Accelerator for Metrology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 103-105. doi:10.18429/JACoW-RUPAC2016-WECDMH03
[n] B. Mikulec, A. Findlay, V. Raginel, G. Rumolo, and G. Sterbini, “Tune Spread Studies at Injection Energies for the CERN Proton Synchrotron Booster”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP249, pp. 175-179.
[n] M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX.
[n] S. V. Ivanov, “Accelerator Complex U70 of IHEP: Present Status and Recent Upgrades”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHZ01, pp. 27-31.
[n] S. Imajo et al., “Development of Slow Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP092, pp. 1062-1064.
[n] J. T. Donohue and J. Gardelle, “Extracting Information from Smith-Purcell FEL Simulations”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH006, pp. 45-48.
[n] L. Brunetti et al., “Influence of vibratory effects on the beam parameters of SuperKEKB”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4718-4720. doi:10.18429/JACoW-IPAC2023-THPL107
[n] T. Russ and Z. Radouch, “The Bates Linac Control System”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-42, pp. 418-420.
[n] A. Bonatto, R. Pakter, and F. B. Rizzato, “Self-Consistent Dynamics of Electromagnetic Pulses and Wakefields in Laser-Plasma Interactions”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ021, pp. 2811-2813.
[n] S. R. Tiwari, M. Borage, and K. Swarna, “Analysis and Design of Parallel Resonant Network Power Supply for a Rapid Cycling Synchrotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA045, pp. 685-687.
[n] J. Han and K. Flottmann, “Half Cell Length Optimization of Photocathode RF Gun”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 24, pp. 70-74.
[n] A. Amin, R. J. Barlow, C. M. Hoehr, C. Lindsay, and A. Infantino, “Modelling PET Radionuclides Production in Tissue and External Targets Using Geant4”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4757-4760. doi:10.18429/JACoW-IPAC2017-THPVA130
[n] V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, J. M. Schippers, and D. C. Weber, “Different Methods to Increase the Transmission in Cyclotron-Based Proton Therapy Facilities”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRBI01, pp. 368-372. doi:10.18429/JACoW-CYCLOTRONS2022-FRBI01
[n] P. M. McIntyre et al., “Gated Field-Emission Cathodes for Microwave Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 725-728.
[n] D. Gonnella et al., “Fundamental Studies on Doped SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB042, pp. 187-190.
[n] A. Seryi et al., “Vibration Stabilization of a Mechanical Model of a X-Band Linear Collider Final Focus Magnet”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP36, pp. 684-686.
[n] V. V. Grechko and G. I. Yamshikov, “Some Aspects of the Cavity Resonant Frequency Control System Heater Operating Point Choice”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD054, pp. 665-667.
[n] M. A. Fuka et al., “The Argonne Beamline-B Telescope Control System: A Study of Adaptability”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 652-655.
[n] P. Faugeras, “Assembly and Commissioning of the LHC Test String”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE03, pp. 1288-1292. doi:10.1109/PAC.1995.505201
[n] N. Marais, “MeerKAT Control and Monitoring System Architecture”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 247-250. doi:10.18429/JACoW-ICALEPCS2015-MOPGF067
[n] G. C. Pappas, S. De Santis, J. E. Galvin, M. V. Orocz, and M. Placidi, “Update on Kicker Development for the NGLS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR095, pp. 2053-2055.
[n] Yu. Zuev, A. P. Klinov, A. S. Krestianinov, O. L. Maslennikov, and V. V. Terentyev, “Modifications of Electron Linear Accelerators Produced in NIIEFA for Sterilization”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 505-507. doi:10.18429/JACoW-RUPAC2016-WEPSB064
[n] S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097.
[n] L. M. Bobb et al., “Vertical Beam Size Measurement at CesrTA Using Diffraction Radiation”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF14, pp. 77-82.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Strehl and H. Vilhjalmsson, “The SIS-Beam Diagnostic System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1413-1416.
- L. Day, J. Power, and M. Stettler, “A Modular Interface between Custom PCI Instrumentation and Commercial Software”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP572, pp. XX-XX.
- G. C. Pappas, “Fast Kickers for the Next Generation Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD098, pp. 3329-3331.
- J. A. Uythoven et al., “Calibration Measurements of the LHC Beam Dumping System Extraction Kicker Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS015, pp. 1520-1522.
- G. P?Âplau, U. Van Rienen, M. J. de Loos, and S. B. van der Geer, “Progress in 3D Space-charge Calculations in the GPT Code”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT048, pp. 2592-2594.
- J. C. Amato, “Development of Higher Order Mode Couplers at Cornell”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E08, pp. XX-XX.
- C. D. P. Levy, W. M. Law, M. McDonald, and P. W. Schmor, “The TRIUMF Optically Pumped Polarized H-Ion Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 364-367.
- B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1402-1405.
- H. S. Kim, J. J. Dang, D.-H. Kim, H.-J. Kwon, S. Lee, and S. P. Yun, “Injector System Development for 1 MeV/n RFQ at KOMAC”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 615-617.
- M. Neroni et al., “Characterization of the longitudinal beam coupling impedance and mitigation strategy for the fast extraction kicker KFA79 in the CERN PS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL150, pp. 3458-3461.
- K. S. Lee, E. Tikhomolov, J. Richards, E. Klassen, and T. Tateyama, “TRIUMF Secondary Beam Line Control System Upgrade Using EPICS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP580, pp. XX-XX.
- Yu. Zuev et al., “A 5 to 20 MeV Electron Linear Accelerator for Metrology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 103-105.
- B. Mikulec, A. Findlay, V. Raginel, G. Rumolo, and G. Sterbini, “Tune Spread Studies at Injection Energies for the CERN Proton Synchrotron Booster”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP249, pp. 175-179.
- M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX.
- S. V. Ivanov, “Accelerator Complex U70 of IHEP: Present Status and Recent Upgrades”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHZ01, pp. 27-31.
- S. Imajo et al., “Development of Slow Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP092, pp. 1062-1064.
- J. T. Donohue and J. Gardelle, “Extracting Information from Smith-Purcell FEL Simulations”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH006, pp. 45-48.
- L. Brunetti et al., “Influence of vibratory effects on the beam parameters of SuperKEKB”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL107, pp. 4718-4720.
- T. Russ and Z. Radouch, “The Bates Linac Control System”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-42, pp. 418-420.
- A. Bonatto, R. Pakter, and F. B. Rizzato, “Self-Consistent Dynamics of Electromagnetic Pulses and Wakefields in Laser-Plasma Interactions”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ021, pp. 2811-2813.
- S. R. Tiwari, M. Borage, and K. Swarna, “Analysis and Design of Parallel Resonant Network Power Supply for a Rapid Cycling Synchrotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA045, pp. 685-687.
- J. Han and K. Flottmann, “Half Cell Length Optimization of Photocathode RF Gun”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 24, pp. 70-74.
- A. Amin, R. J. Barlow, C. M. Hoehr, C. Lindsay, and A. Infantino, “Modelling PET Radionuclides Production in Tissue and External Targets Using Geant4”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4757-4760.
- V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, J. M. Schippers, and D. C. Weber, “Different Methods to Increase the Transmission in Cyclotron-Based Proton Therapy Facilities”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRBI01, pp. 368-372.
- P. M. McIntyre et al., “Gated Field-Emission Cathodes for Microwave Devices”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 725-728.
- D. Gonnella et al., “Fundamental Studies on Doped SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB042, pp. 187-190.
- A. Seryi et al., “Vibration Stabilization of a Mechanical Model of a X-Band Linear Collider Final Focus Magnet”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP36, pp. 684-686.
- V. V. Grechko and G. I. Yamshikov, “Some Aspects of the Cavity Resonant Frequency Control System Heater Operating Point Choice”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD054, pp. 665-667.
- M. A. Fuka et al., “The Argonne Beamline-B Telescope Control System: A Study of Adaptability”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 652-655.
- P. Faugeras, “Assembly and Commissioning of the LHC Test String”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE03, pp. 1288-1292.
- N. Marais, “MeerKAT Control and Monitoring System Architecture”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 247-250.
- G. C. Pappas, S. De Santis, J. E. Galvin, M. V. Orocz, and M. Placidi, “Update on Kicker Development for the NGLS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR095, pp. 2053-2055.
- Yu. Zuev, A. P. Klinov, A. S. Krestianinov, O. L. Maslennikov, and V. V. Terentyev, “Modifications of Electron Linear Accelerators Produced in NIIEFA for Sterilization”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 505-507.
- S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097.
- L. M. Bobb et al., “Vertical Beam Size Measurement at CesrTA Using Diffraction Radiation”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF14, pp. 77-82.
Back to search