JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Jablonka et al., “Beam Performances of MACSE, the Saclay Superconducting Test Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 713-716. 
[n]	T. Takayanagi, K. Horino, and T. Ueno, “Development of Low Inductance Circuit for Radially Symmetric Circuit”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2013-2016. doi:10.18429/JACoW-IPAC2019-TUPTS034
[n]	Y. Morozumi, “Realistic Evaluation of Local Field Enhancement based on Precision Profilometry of Surface Defects”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC020, pp. 2932-2934. 
[n]	P. R. Sarma, R. K. Bhandari, and S. K. Pattanayak, “Improvement of Field Quality of Glaser Magnets Used for Focusing Ion Beams”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-05, pp. 466-469. 
[n]	R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78. 
[n]	Y. Fuwa, Y. Iwashita, H. Tongu, M. Ichikawa, and N. Miyawaki, “Development of Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 98-100. doi:10.18429/JACoW-ECRIS2016-WEPP08
[n]	T. Abe, T. Kageyama, H. Sakai, and Y. Takeuchi, “Fine Grooving of Conductor Surfaces of RF Input Coupler to Suppress Multipactoring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH127, pp. 1310-1312. 
[n]	T. Thuillier, “The never ending story of ECR Ion Sources”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WET1AUK02, unpublished. 
[n]	K. Hasegawa, “The R&D Status on the Front End of the High Intensity Proton Accelerator in JAERI”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP09, pp. 665-667. 
[n]	K. Okihira et al., “Result of MHI 2-Cell Seamless Dumb-Bell Cavity Vertical Test”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP100, pp. 1087-1089. 
[n]	L. W. Funk, “The SSC Linear Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1700-1703. 
[n]	N. S. Joshi, G. Bollen, M. Brodeur, D. J. Morrissey, and S. Schwarz, “Status of NSCL Cyclotron Gas Stopper”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR087, pp. 2029-2031. 
[n]	R. Miller, T. Fieguth, G. Loew, F. Bulos, E. Bloom, and G. Godfrey, “Progress on PEP-II Injection R&D”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3084-3087. 
[n]	H. Takeda, J. H. Billen, and S. Nath, “Physics Design of the National Spallation Neutron Source Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W025, pp. 1171-1173. 
[n]	L. Monaco, G. Guerini Rocco, P. Michelato, C. Pagani, and D. Sertore, “Growing and Characterization of Cs2Te Photocatodes with Different Thicknesses at INFN LASA”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 297-300. doi:10.18429/JACoW-FEL2019-WEA04
[n]	F. Naito et al., “High-Power Test of The SDTL for The JAERI/KEK Joint Project”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU447, pp. 425-427. 
[n]	M. L. Neubauer, A. Dudas, G. A. Krafft, R. A. Rimmer, and R. Sah, “Novel Crab Cavity RF Design”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC061, pp. 3031-3033. 
[n]	D. Zangrando and R. P. Walker, “Magnetic Measurement Facility for the ELETTRA Insertion Devices”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1355-1358. 
[n]	A. V. Makeev, N. Atuchin, D. Bolkhovityanov, P. B. Cheblakov, and S. E. Karnaev, “Centralized Software and Hardware Configuration Tool for Large and Small Experimental Physics Facilities”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC022, pp. 591-593. 
[n]	A. Jansson, H. Danared, M. Eshraqi, and L. Tchelidze, “Beam Instrumentation for the European Spallation Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP184, pp. 432-434. 
[n]	M. Kranjcevic, A. Adelmann, P. Arbenz, S. Gorgi Zadeh, and U. van Rienen, “Constrained Multi-Objective Shape Optimization of Superconducting RF Cavities to Counteract Dangerous Higher Order Modes”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 293-296. doi:10.18429/JACoW-ICAP2018-TUPAG14
[n]	A. Lueangaramwong, J. Hares, I.P.S. Martin, and R. Fielder, “A Kick-and-Cancel injection scheme for Diamond-II”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3240-3243. doi:10.18429/JACoW-IPAC2024-THPG01
[n]	A. Z. Ghalam, V. Decyk, C. Huang, T. C. Katsouleas, and W. B. Mori, “Simulation of Beam-Electron Cloud Interactions in Circular Accelerators Using Plasma Models”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB076, pp. 3174-3176. 
[n]	A. Canabal et al., “Full Real-time Temperature Mapping System for 9-cell ILC-type Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP121, pp. 841-843. 
[n]	B.-S. Wang, K.-B. Liu, and Y. S. Wong, “Development of high-current correction magnet power supply for TPS facilities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3745-3747. doi:10.18429/JACoW-IPAC2024-THPS10
[n]	R. B. Palmer, S. Ozaki, and M. S. Zisman, “2nd Feasibility Study of a Muon Storage Ring Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC007, pp. 732-736. 
[n]	R. Soliday, M. Borland, L. Emery, and H. Shang, “Use of a Simple Storage Ring Simulation for Development of Enhanced Orbit Correction Software”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG006, pp. 3476-3478. 
[n]	C. R. Rose, J. D. Gilpatrick, and M. W. Stettler, “The LEDA Beam-Position Measurement System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P077, pp. 2093-2095. 
[n]	R. Ferdinand, P.-Y. Beauvais, D. Bogard, R. Gobin, and B. Pottin, “Non-interceptive Emittance Measurement of a High Intensity Beam at Low Energy”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4059, pp. 902-904. 
[n]	A.A.Pachkov, P.A.Bak (Budker Institute of Nuclear Physics, Novosibirsk, Russia), “HIGH VOLTAGE DECOUPLED HIGH-CURRENT POWER SUPPLY”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOHP15, pp. XX-XX. 
[n]	F. Naito et al., “Input Coupler for the KEKB Normal Conducting Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR09, pp. 1806-1808. 
[n]	A. Passarelli, A. Andreone, M. De Stefano, C. Koral, M. R. Masullo, and V. G. Vaccaro, “Broadband Frequency Electromagnetic Characterisation of Coating Materials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1076-1079. doi:10.18429/JACoW-IPAC2021-MOPAB346
[n]	G. L. Wang, X. M. Yang, W. Q. Zhang, H. X. Deng, and C. Feng, “Harmonic Lasing Options for Dalian Coherent Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 770-773. doi:10.18429/JACoW-IPAC2016-MOPOW024
[n]	E. Schneidmiller and M. V. Yurkov, “Lasing at 13 nm of the SASE FEL at FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOAAU03, pp. XX-XX. 
[n]	M. Vogt, K. Honkavaara, J. R?Ânsch-Schulenburg, S. Schreiber, and J. Zemella, “Upgrade Plans for FLASH for the Years After 2020”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1748-1751. doi:10.18429/JACoW-IPAC2019-TUPRB027
[n]	N. Pyka, U. B. Blell, P. J. Spiller, and J. Stadlmann, “Design of the Beam Extraction System of the New Heavy Ion Synchrotrons SIS100 and SIS300 at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP103, pp. 3605-3607. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search