Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Lobach et al., “Study of Fluctuations in Undulator Radiation in the IOTA Ring at Fermilab”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 777-780. doi:10.18429/JACoW-IPAC2019-MOPRB088
[n] T. Hu et al., “Design and Analysis of RF Cavities for the Cyclotron CYCHU-10”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA030, pp. 3744-3746.
[n] E. Chiadroni et al., “Betatron radiation studies as a path to plasma undulators”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3019, unpublished.
[n] F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. IPAC'20, Caen, France, May 2020, paper MOOR03, pp. XX-XX.
[n] A. Romanenko, L. D. Cooley, J. P. Ozelis, N. Solyak, and V. P. Yakovlev, “Assumptions for the RF Losses in the 650 MHz Cavities of the Project X Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP085, pp. 985-987.
[n] Y. Papaphilippou et al., “Comparison of PS2 Lattices with Different Geometries”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE021, pp. 4557-4559.
[n] S. Barbanotti et al., “Status of the Mechanical Design of the 650 MHz Cavities for Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP069, pp. 943-945.
[n] S. M. Deambrosis, G. Keppel, V. Palmieri, V. Rampazzo, C. Roncolato, and R. G. Sharma, “A15 Superconductors: An Alternative to Niobium for RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA13, pp. 205-209.
[n] R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837.
[n] R. L. Madrak et al., “First High Power Pulsed Tests of a Dressed 325 MHz Superconducting Single Spoke Resonator at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP076, pp. 964-966.
[n] J. Kreutzkamp and L. Hagge, “P3PO: An Information System for Supporting Installation Procedures at PETRA III”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN016, pp. 179-181.
[n] B. Lorbeer, B. Beutner, H. T. Duhme, L. Froehlich, D. Lipka, and D. Noelle, “Energy Beam Position Monitor Button Array Electronics for the European XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1927-1929. doi:10.18429/JACoW-IPAC2018-WEPAF049
[n] T. Lamb et al., “Development of an Alternative, Photodiode-Based, Femtosecond Stable Detection Principle for the Link Stabilization in the Optical Synchronization Systems at FLASH and XFEL”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD35, pp. 380-382.
[n] S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
[n] S. V. Kutsaev et al., “Design of a Superconducting Quarter-Wave Resonator for eRHIC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP002, pp. 49-51.
[n] J.-L. Revol et al., “ESRF Operation Status”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4088-4091. doi:10.18429/JACoW-IPAC2018-THPMF021
[n] G. Liu et al., “A CW High Charge State Heavy Ion RFQ Accelerator for SSC-LINAC Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP041, pp. 3826-3828.
[n] B. Salvant et al., “Probing Intensity Limits of LHC-type Bunches in the CERN SPS with Nominal Optics”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS009, pp. 610-612.
[n] E. Schneidmiller et al., “Considerations for the Ultrahard X-ray Undulator Line of the European XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1732-1735. doi:10.18429/JACoW-IPAC2019-TUPRB023
[n] M. Dehler, R. Fortunati, T. Kleeb, L. Stingelin, and R. Zennaro, “An alternative HOM load design for the EU HOM damped cavity”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7016, unpublished.
[n] R. C. Gupta et al., “Optimization of Open Midplane Dipole Design for LHC IR Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT049, pp. 3055-3057.
[n] L. Bellantoni et al., “Test Results of the 3.9 GHz Cavity at Fermilab”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP85, pp. 797-799.
[n] Q. Lin, W. J. Corbett, D. J. Martin, Z. H. Sun, and K. Tian, “Time-Synchronous Measurements of Transient Beam Dynamics at SPEAR3”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 441-444. doi:10.18429/JACoW-IBIC2018-WEPB06
[n] M. Attal and E. Huttel, “Multipoles and Alignment Error Limits for the SESAME Storage Ring Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3035-3037. doi:10.18429/JACoW-IPAC2014-THPRO068
[n] X. Huang, W. J. Corbett, Y. Nosochkov, J. A. Safranek, J. J. Sebek, and A. Terebilo, “Low Alpha Mode for SPEAR3”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS051, pp. 1308-1310.
[n] C. Benabderrahmane et al., “Status of the ESRF-EBS Magnets”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2648-2651. doi:10.18429/JACoW-IPAC2018-WEPMK009
[n] J. G. Power et al., “High Power Testing of X-Band Dielectric-Loaded Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA010, pp. 492-494.
[n] A. Noda, Y. Kamiya, M. Kihara, and C. Ohmori, “Slow Beam Extraction of the Japanese HADRON Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1592-1595.
[n] C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 58-60. doi:10.18429/JACoW-ICAP2015-TUDWC1
[n] L. Dahl, W. Barth, and S. Yaramishev, “”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU421, pp. 350-352.
[n] X. Yang et al., “Experiments on a BSM test bench for CSNS-II linac upgrade”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 662-666. doi:10.18429/JACoW-IBIC2025-WEPCO21
[n] D. Li et al., “The Normal Conducting RF Cavity for the MICE Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP005, pp. 1994-1996.
[n] A. Gonzalez, A. Plastun, and P. Ostroumov, “Mitigation of longitudinal beam losses in the FRIB linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 13-16. doi:10.18429/JACoW-LINAC2024-MOAA002
[n] A. C. Morton, “Operational Considerations for Future Multi-user RIB Facilities”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOC03, pp. 41-44.
[n] M. Cavenago et al., “Metal Vapour Production for ECR Ion Sources”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1424-1427.
[n] M. Aramaki, N. Hayashizaki, and D. Nagae, “Beam delivery system for BNCT at Tokyo Institute of Technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4964-4966. doi:10.18429/JACoW-IPAC2023-THPM034
[n] R. Rimmer, D. A. Goldberg, A. F. Jacob, G. R. Lambertson, and F. Voelker, “Beam Impedance Measurements on the ALS Curved Sector Tank”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1055-1058.
[n] M. Marchetto et al., “The ISAC-II Linac Performance”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEM2I01, pp. 175-179.
[n] M. C. Paniccia, S. L. Clark, D. M. Gassner, R. L. Hulsart, and P. Thieberger, “Web-Based Application for Cable Simulation Models”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 156-158. doi:10.18429/JACoW-IBIC2022-MOP43
[n] M. Chin, J. Hinkson, and S. Magyary, “Networking Remote Instrumentation for the Advance Light Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1648-1651.
[n] S. S. Bulanov, E. Esarey, Q. Ji, W. Leemans, T. Schenkel, and S. Steinke, “Advanced Acceleration Mechanisms for Laser Driven Ions by PW-lasers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2082-2084. doi:10.18429/JACoW-IPAC2016-WEOAB01
[n] N. V. Mokhov, P. Ferracin, V. Kashikhin, M. Monville, and G. L. Sabbi, “Energy Deposition Studies of Block-Coil Quadrupoles for the LHC Luminosity Upgrade”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS027, pp. 491-493.
[n] M. Trinczek et al., “Beam Delivery and Future Initiatives at the ISAC Radioactive Ion Beam Facility”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP124, pp. 5074-5076.
[n] G. L. Orlandi, “Covariance and Temporal Causality in the Transition Radiation Emission by an Electron Bunch”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF07, pp. 511-514.
[n] R. E. Laxdal et al., “Commissioning of the 10MeV Electron Injector Cryomodule for VECC at TRIUMF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1365-1368. doi:10.18429/JACoW-IPAC2017-TUPAB023
[n] J. B??rger, J. A. Dammann, L. Hagge, J. Iversen, A. Matheisen, and W. Singer, “Towards Industrialization: Supporting the Manufacturing Processes of Superconducting Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP15, pp. 489-491.
[n] F. Zimmermann, M. Benedikt, and A.-S. Mueller, “The Future Circular Collider Study”, in Proc. IPAC'20, Caen, France, May 2020, pp. 6. doi:10.18429/JACoW-IPAC2020-MOVIR01
[n] T. Lamb et al., “Femtosecond Stable Laser-to-RF Phase Detection Using Optical Modulators”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA32, pp. 551-554.
[n] M. P. Kelly et al., “Superconducting 72 MHz =0.077 Quarter-wave Cavity for ATLAS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP046, pp. 892-894.
[n] M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349.
[n] C. Hernalsteens et al., “Design and Beam Measurements of Modified Fast Extraction Schemes in the CERN PS for Installing a Dummy Septum to Mitigate Ring Irradiation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA056, pp. 2633-2635.
[n] G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, and R. De Monte, “Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 190-195. doi:10.18429/JACoW-IBIC2018-TUOC01
[n] P. Emma et al., “Measurements of Compression and Emittance Growth after the First LCLS Bunch Compressor Chicane”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCAB02, pp. 807-809.
[n] R. A. Phillips, M. P. J. Gaudreau, M. K. Kempkes, B. E. Simpson, and J. A. Casey, “Affordable, Short Pulse MARX Modulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA065, pp. 828-830.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Lobach et al., “Study of Fluctuations in Undulator Radiation in the IOTA Ring at Fermilab”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 777-780.
- T. Hu et al., “Design and Analysis of RF Cavities for the Cyclotron CYCHU-10”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA030, pp. 3744-3746.
- E. Chiadroni et al., “Betatron radiation studies as a path to plasma undulators”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3019, this conference.
- F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOOR03, pp. XX-XX.
- A. Romanenko, L. D. Cooley, J. P. Ozelis, N. Solyak, and V. P. Yakovlev, “Assumptions for the RF Losses in the 650 MHz Cavities of the Project X Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP085, pp. 985-987.
- Y. Papaphilippou et al., “Comparison of PS2 Lattices with Different Geometries”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE021, pp. 4557-4559.
- S. Barbanotti et al., “Status of the Mechanical Design of the 650 MHz Cavities for Project X”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP069, pp. 943-945.
- S. M. Deambrosis, G. Keppel, V. Palmieri, V. Rampazzo, C. Roncolato, and R. G. Sharma, “A15 Superconductors: An Alternative to Niobium for RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA13, pp. 205-209.
- R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837.
- R. L. Madrak et al., “First High Power Pulsed Tests of a Dressed 325 MHz Superconducting Single Spoke Resonator at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP076, pp. 964-966.
- J. Kreutzkamp and L. Hagge, “P3PO: An Information System for Supporting Installation Procedures at PETRA III”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN016, pp. 179-181.
- B. Lorbeer, B. Beutner, H. T. Duhme, L. Froehlich, D. Lipka, and D. Noelle, “Energy Beam Position Monitor Button Array Electronics for the European XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1927-1929.
- T. Lamb et al., “Development of an Alternative, Photodiode-Based, Femtosecond Stable Detection Principle for the Link Stabilization in the Optical Synchronization Systems at FLASH and XFEL”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD35, pp. 380-382.
- S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
- S. V. Kutsaev et al., “Design of a Superconducting Quarter-Wave Resonator for eRHIC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP002, pp. 49-51.
- J.-L. Revol et al., “ESRF Operation Status”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4088-4091.
- G. Liu et al., “A CW High Charge State Heavy Ion RFQ Accelerator for SSC-LINAC Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP041, pp. 3826-3828.
- B. Salvant et al., “Probing Intensity Limits of LHC-type Bunches in the CERN SPS with Nominal Optics”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS009, pp. 610-612.
- E. Schneidmiller et al., “Considerations for the Ultrahard X-ray Undulator Line of the European XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1732-1735.
- M. Dehler, R. Fortunati, T. Kleeb, L. Stingelin, and R. Zennaro, “An alternative HOM load design for the EU HOM damped cavity”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7016, this conference.
- R. C. Gupta et al., “Optimization of Open Midplane Dipole Design for LHC IR Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT049, pp. 3055-3057.
- L. Bellantoni et al., “Test Results of the 3.9 GHz Cavity at Fermilab”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP85, pp. 797-799.
- Q. Lin, W. J. Corbett, D. J. Martin, Z. H. Sun, and K. Tian, “Time-Synchronous Measurements of Transient Beam Dynamics at SPEAR3”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 441-444.
- M. Attal and E. Huttel, “Multipoles and Alignment Error Limits for the SESAME Storage Ring Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3035-3037.
- X. Huang, W. J. Corbett, Y. Nosochkov, J. A. Safranek, J. J. Sebek, and A. Terebilo, “Low Alpha Mode for SPEAR3”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS051, pp. 1308-1310.
- C. Benabderrahmane et al., “Status of the ESRF-EBS Magnets”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2648-2651.
- J. G. Power et al., “High Power Testing of X-Band Dielectric-Loaded Accelerating Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA010, pp. 492-494.
- A. Noda, Y. Kamiya, M. Kihara, and C. Ohmori, “Slow Beam Extraction of the Japanese HADRON Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1592-1595.
- C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 58-60.
- L. Dahl, W. Barth, and S. Yaramishev, “”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU421, pp. 350-352.
- X. Yang et al., “Experiments on a BSM test bench for CSNS-II linac upgrade”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 662-666.
- D. Li et al., “The Normal Conducting RF Cavity for the MICE Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP005, pp. 1994-1996.
- A. Gonzalez, A. Plastun, and P. Ostroumov, “Mitigation of longitudinal beam losses in the FRIB linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 13-16.
- A. C. Morton, “Operational Considerations for Future Multi-user RIB Facilities”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOC03, pp. 41-44.
- M. Cavenago et al., “Metal Vapour Production for ECR Ion Sources”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1424-1427.
- M. Aramaki, N. Hayashizaki, and D. Nagae, “Beam delivery system for BNCT at Tokyo Institute of Technology”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM034, pp. 4964-4966.
- R. Rimmer, D. A. Goldberg, A. F. Jacob, G. R. Lambertson, and F. Voelker, “Beam Impedance Measurements on the ALS Curved Sector Tank”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1055-1058.
- M. Marchetto et al., “The ISAC-II Linac Performance”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEM2I01, pp. 175-179.
- M. C. Paniccia, S. L. Clark, D. M. Gassner, R. L. Hulsart, and P. Thieberger, “Web-Based Application for Cable Simulation Models”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 156-158.
- M. Chin, J. Hinkson, and S. Magyary, “Networking Remote Instrumentation for the Advance Light Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1648-1651.
- S. S. Bulanov, E. Esarey, Q. Ji, W. Leemans, T. Schenkel, and S. Steinke, “Advanced Acceleration Mechanisms for Laser Driven Ions by PW-lasers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2082-2084.
- N. V. Mokhov, P. Ferracin, V. Kashikhin, M. Monville, and G. L. Sabbi, “Energy Deposition Studies of Block-Coil Quadrupoles for the LHC Luminosity Upgrade”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS027, pp. 491-493.
- M. Trinczek et al., “Beam Delivery and Future Initiatives at the ISAC Radioactive Ion Beam Facility”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP124, pp. 5074-5076.
- G. L. Orlandi, “Covariance and Temporal Causality in the Transition Radiation Emission by an Electron Bunch”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF07, pp. 511-514.
- R. E. Laxdal et al., “Commissioning of the 10MeV Electron Injector Cryomodule for VECC at TRIUMF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1365-1368.
- J. B??rger, J. A. Dammann, L. Hagge, J. Iversen, A. Matheisen, and W. Singer, “Towards Industrialization: Supporting the Manufacturing Processes of Superconducting Cavities at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP15, pp. 489-491.
- F. Zimmermann, M. Benedikt, and A.-S. Mueller, “The Future Circular Collider Study”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 6.
- T. Lamb et al., “Femtosecond Stable Laser-to-RF Phase Detection Using Optical Modulators”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA32, pp. 551-554.
- M. P. Kelly et al., “Superconducting 72 MHz =0.077 Quarter-wave Cavity for ATLAS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP046, pp. 892-894.
- M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349.
- C. Hernalsteens et al., “Design and Beam Measurements of Modified Fast Extraction Schemes in the CERN PS for Installing a Dummy Septum to Mitigate Ring Irradiation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA056, pp. 2633-2635.
- G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, and R. De Monte, “Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 190-195.
- P. Emma et al., “Measurements of Compression and Emittance Growth after the First LCLS Bunch Compressor Chicane”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOCAB02, pp. 807-809.
- R. A. Phillips, M. P. J. Gaudreau, M. K. Kempkes, B. E. Simpson, and J. A. Casey, “Affordable, Short Pulse MARX Modulator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA065, pp. 828-830.
Back to search