JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	I. E. Campisi and Z. D. Farkas, “Superconductors for Pulsed RF Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3602-3605. 
[n]	H. W. Kim et al., “Analysis of Beam Stability in the KAERI Ultrashort Pulse Accelerator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP010, pp. 697-698. 
[n]	M. Li et al., “Modification of the Short Straight Sections of the High Energy Booster of the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 236-239. 
[n]	J. Kang, H. M. Jang, B. Kang, J.-W. Kim, and J. H. Lee, “Status of the ISOL Cyclotron System in RISP”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 356-358. doi:10.18429/JACoW-Cyclotrons2016-THP22
[n]	R. Servranckx and J. L. LaClare, “Concept and General Design of an Electron Pulse Stretcher”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 204-207. 
[n]	M. G. Atanasov et al., “Upgrade of the TCDQ Diluters for the LHC Beam Dump System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3079-3082. doi:10.18429/JACoW-IPAC2015-WEPMN067
[n]	N. V. Smolyakov, V. Korchuganov, and S. I. Tomin, “Radiation Sources at Siberia-2 Storage Ring”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHB01, pp. 141-143. 
[n]	U. Holzwarth, “PRODUCTION OF MINIATURIZED 72Se/72As POSITRON GENERATORS FOR APPLICATIONS IN MATERIALS SCIENCE”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P04, pp. XX-XX. 
[n]	I. A. Ivanenko, “The Methods of Compensation of the Beam Vertical Divergence at the Exit of Spiral Inflector in Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 221-223. doi:10.18429/JACoW-Cyclotrons2016-TUP25
[n]	T. J. Zhang, F. Yang, and H. Yi, “Installation and Test Progress for CYCIAE-100”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT014, pp. 61-63. 
[n]	H. Imao et al., “Charge Stripper Ring for Cyclotron Cascade”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 155-159. doi:10.18429/JACoW-Cyclotrons2016-TUC02
[n]	M. Migliorati, G. Dattoli, C. R. Frascati, A. Schiavi, and M. Venturini, “A Four-dimensional Vlasov Solver for Microbunching Instability in the Injection System for X-ray FELs”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP100, pp. 1764-1766. 
[n]	Y. Kang et al., “Electromagnetic Simulations and Properties of the Fundamental Power Couplers for the SNS Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH147, pp. 1122-1124. 
[n]	I. D. Karpushkov et al., “Insertion Devices R&D at KSRS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18G, pp. 2246-2248. 
[n]	C. Rosati, “Using Control Surfaces to Operate CS-Studio OPIs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1953-1957. doi:10.18429/JACoW-ICALEPCS2017-THSH101
[n]	N. Yu. Kazarinov and I. A. Ivanenko, “Simulation of the Beam Dynamics in the Axial Injection Beam Line of FLNR JINR DC280 Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 251-253. doi:10.18429/JACoW-Cyclotrons2016-WEA02
[n]	L. Zeng, X. Wang, H. Yi, Y. Liang, and W. Zhang, “Physical design for EEHG beamlines of S3FEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL045, unpublished. 
[n]	J. L. LaClare and R. Servranckx, “Injection in a Ring with Nonlinear Elements and Energy Selective Resonant Extraction from a Ring”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 207-210. 
[n]	D. R. Khasaya, B. Y. Bogdanovich, A. V. Ilyinsky, A. Nesterovich, A. E. Shikanov, and E. A. Shikanov, “Application of Small-Sized Vacuum Accelerating Tubes for Neutron Control of Increasing Debit of Oil Wells by Acoustic Influence of the Formation”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH05, pp. 233-235. 
[n]	J. Prenting et al., “High Precision Survey and Alignment of Large Linear Accelerators”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP38, pp. 690-692. 
[n]	A. V. Zlobin et al., “Quench Performance of the First Twin-aperture 11 T Dipole for LHC upgrades”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3361-3364. doi:10.18429/JACoW-IPAC2015-WEPTY040
[n]	M. T. Li, Y. W. An, F. Li, S. Y. Xu, and T. G. Xu, “Application of WCM in Beam Commissioning of RCS in CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 636-638. doi:10.18429/JACoW-IPAC2019-MOPRB028
[n]	N. V. Smolyakov, S. I. Tomin, and G. Geloni, “Analytical and Numerical Analysis of Electron Trajectories in a 3-D Undulator Magnetic Field”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO77, pp. 406-409. 
[n]	M. Migliorati, G. Dattoli, C. R. Frascati, and A. Schiavi, “Modeling High-Current Instabilities in Particle Accelerators”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP09, pp. 110-113. 
[n]	T. Abe et al., “Outgassing Rate of Highly Pure Copper Electroplating Applied to RF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH126, pp. 1307-1309. 
[n]	A. J. Gonsalves et al., “Experimental Demonstration of 1 GeV Energy Gain in a Laser Wakefield Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEYKI02, pp. 1911-1915. 
[n]	C. Duchemin et al., “CERN-MEDICIS: A Unique Facility for the Production of Non-Conventional Radionuclides for the Medical Research”, in Proc. IPAC'20, Caen, France, May 2020, pp. 75. doi:10.18429/JACoW-IPAC2020-THVIR13
[n]	A. L. Vamvakas et al., “Integration and Testing of 3 Consecutive CLIC Two-Beam Modules”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3856-3858. doi:10.18429/JACoW-IPAC2016-THPOR033
[n]	C. Hauviller, “The New ISR Absorber Blocks for High Intensity Beams”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4134-4137. 
[n]	M. Kuhn et al., “Causes and Solutions for Emittance Blow-Up During the LHC Cycle”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC017, pp. 160-162. 
[n]	I. Lamas Garcia et al., “LHC Injection Protection Devices, Thermo-mechanical Studies through the Design Phase”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3698-3701. doi:10.18429/JACoW-IPAC2016-THPMY019
[n]	M. Sosin, T. Dijoud, H. Mainaud Durand, and V. Rude, “Position Monitoring System for HL-LHC Crab Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2704-2706. doi:10.18429/JACoW-IPAC2016-WEPOR018
[n]	F. Naito et al., “Mechanical and RF Properties of The DTL for The JAERI/KEK Joint Project”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU424, pp. 359-361. 
[n]	V. H. Ranjbar, “Approaches to Optimizing Spin Transmission in Lattice Design”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 151-153. doi:10.18429/JACoW-ICAP2018-MOPAF05
[n]	M. P. Bourgarel et al., “First Results of the 14.5 GHz GANIL ECR Source with the C. W. and the Pulsed Operation Mode”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 645-647. 
[n]	J. Galambos, “Progress with MW-Class Operation of the Spallation Neutron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1GRI01, pp. 1818-1822. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search