JaCoW Logo

Reference Search

Favourites


For Word

[n]	G. Arnolds, H. Heinrichs, R. Mayer, N. Minatti, H. Piel, and W. Weingarten, “Design and Status of an Experimental Superconducting Linear Accelerator for Electrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3775-3778. 
[n]	S. Naknaimueang et al., “Simulating the Bunch Structure in the THz Source FLUTE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA008, pp. 2141-2143. 
[n]	H. Padamsee, “SRF for Muon Colliders”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA006, pp. 587-592. 
[n]	V. Litvinenko et al., “R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC057, pp. 193-195. 
[n]	D. Trines, “TESLA Project Overview”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA003, pp. 605-609. 
[n]	H. Burkhardt, “ELFE at CERN”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA005, pp. 602-604. 
[n]	S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA002, pp. 6-9. 
[n]	C. Zanoni et al., “The Crab Cavities Cryomodule for SPS Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1081-1084. doi:10.18429/JACoW-IPAC2017-MOPVA096
[n]	T. Lefevre et al., “A Large Scintillating Screen for the LHC Dump Line”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB28, pp. 132-134. 
[n]	M. Sapinski et al., “Requirements of CLIC Beam Loss Monitoring System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB074, pp. 2869-2871. 
[n]	V. Ptitsyn et al., “MeRHIC ÔÇô Staging Approach to eRHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP062, pp. 2643-2645. 
[n]	B. Kehrer et al., “Simultaneous Detection of Longitudinal and Transverse Bunch Signals at ANKA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 109-111. doi:10.18429/JACoW-IPAC2016-MOPMB014
[n]	D. Proch, “Activities with Superconducting Cavities at DESY”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA005, pp. 19-23. 
[n]	D. Ramos et al., “The Mechanical Design of a Collimator and Cryogenic Bypass for Installation in the Dispersion Suppressors of the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD029, pp. 2567-2569. 
[n]	W. Zhang et al., “Analysis of RHIC Beam Dump Pre-fires”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP108, pp. 2327-2329. 
[n]	T. M. Mitsuhashi, K. Oide, and F. Zimmermann, “Conceptual Design for SR Monitor in the FCC Beam Emittance (Size) Diagnostic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 133-136. doi:10.18429/JACoW-IPAC2016-MOPMB022
[n]	C. E. Reece, “Overview of CEBAF Operations and SRF-Related Activities at Jefferson Lab”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA004, pp. 15-18. 
[n]	H. Maesaka et al., “Development of Beam Diagnostic System for the SPring-8 Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 149-151. doi:10.18429/JACoW-IPAC2016-MOPMB028
[n]	K. Artoos, M. Guinchard, and T. Renaglia, “Sliding Force Measurements on the LHC RF Contact Plug in Modules at 15 K and in UHV”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD021, pp. 1473-1475. 
[n]	S. Z. Wang, N. Gan, and X. Huang, “The Influence of Strip-line BPMs' Measuring Results Made by Edge of the Ultra-relativistic Electron Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 161-163. doi:10.18429/JACoW-IPAC2016-MOPMB033
[n]	L. Lari et al., “Evaluation of the Combined Betatron and Momentum Cleaning in Point 3 in Terms of Cleaning Efficiency and Energy Deposition for the LHC Collimation Upgrade”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ032, pp. 3762-3764. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search