Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Shi, W. P. Chai, J. W. Xia, J. C. Yang, and Y. J. Yuan, “Slow extraction design in HIMM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA031, pp. 2567-2569.
[n] D. Wollmann, R. Schmidt, J. A. Uythoven, J. Wenninger, and M. Zerlauth, “Commissioning of the Machine Protection Systems of the Large Hadron Collider Following its First Long Shutdown”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4203-4206. doi:10.18429/JACoW-IPAC2016-THPOY045
[n] B. Dalena, A. Chanc?®, J. Payet, R. De Maria, and S. D. Fartoukh, “High Luminosity LHC Matching Section Layout vs Crab Cavity Voltage”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI001, pp. 1328-1330.
[n] S. Aderhold, “Optical Inspection of SRF Cavities at DESY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC005, pp. 2896-2898.
[n] M. Marie-Jeanne et al., “Status of the SEISM Experiment”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEZO01, pp. 111-113.
[n] R. Alemany-Fernandez, F. Follin, and R. Jacobsson, “The LHCb Online Luminosity Control and Monitoring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI010, pp. 1346-1348.
[n] A. V. Aleksandrov et al., “High-Dynamic-Range Current Measurements in the Medium-Energy Beta Transport Line at the Spallation Neutron Source”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP002, pp. 244-246.
[n] S. Redaelli et al., “Experience with High-intensity Beam Scraping and Tail Populations at the Large Hadon Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO039, pp. 978-980.
[n] D. Wollmann, R. Schmidt, J. Wenninger, and M. Zerlauth, “Machine Protection at the LHC - Experience of Three Years Running and Outlook for Operation at Nominal Energy”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA046, pp. 3246-3248.
[n] W. P. Chai, J. Shi, J. W. Xia, and J. C. Yang, “Study of Charge Exchange Injection in HITFiL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS044, pp. 3520-3522.
[n] E. Gschwendtner et al., “The AWAKE Experimental Facility at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 582-585. doi:10.18429/JACoW-IPAC2014-MOPRI005
[n] A. I. Dzergach, V. S. Kabanov, A. M. Sessler, and J. S. Wurtele, “About the Realization of Laser Acceleration Schemes based on Plasmoids in RF Wells”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP46C, pp. 821-823.
[n] S. Lederer et al., “Photocathodes at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP029, pp. 625-627.
[n] D. J. Harding et al., “Design and Fabrication of a Multi-element Corrector Magnet for the Fermilab Booster Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS006, pp. 452-454.
[n] H. Nishimura and T. Scarvie, “Estimation of the Effective Magnet Misalignments of the ALS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE062, pp. 3559-3560.
[n] P. Murcek et al., “Modified 3+1/2 Cell SC Cavity Made of Large Grain Niobium for the FZD SRF Photoinjector”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO022, pp. 585-588.
[n] G. H. Hoffstaetter and A. Stocchi, “ERL17 Workshop, WG3 Summary: Test Facilities Around the World”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 80-80. doi:10.18429/JACoW-ERL2017-FRIBCC003
[n] W. H?Âfle et al., “Impact of a Wideband Feedback Prototype System on TMCI in the SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1208-1211. doi:10.18429/JACoW-IPAC2018-TUZGBD4
[n] M. L. Lozano, N. Bidault, E. Fadakis, M. A. Fraser, E. Matli, and J. A. Rodriguez, “Characterization of the Beam Energy Spread at the REX/HIE-ISOLDE Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 787-789. doi:10.18429/JACoW-IPAC2018-TUPAF042
[n] S. J. Park et al., “Physics and Engineering Issues of PPI (Pohang Photo-Injector) for PAL XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP054, pp. XX-XX.
[n] G. Papotti et al., “Observation of Bunch to Bunch Differences due to Beam-beam Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ023, pp. 1855-1857.
[n] D. Schmied, E. Burtin, J. M. Chaize, R. Kersevan, I. Parat, and P. V. Verdier, “Presentation of the New ESRF Vacuum Control Applications from an Operational Point of View”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP012, pp. 1550-1552.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Shi, W. P. Chai, J. W. Xia, J. C. Yang, and Y. J. Yuan, “Slow extraction design in HIMM”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA031, pp. 2567-2569.
- D. Wollmann, R. Schmidt, J. A. Uythoven, J. Wenninger, and M. Zerlauth, “Commissioning of the Machine Protection Systems of the Large Hadron Collider Following its First Long Shutdown”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4203-4206.
- B. Dalena, A. Chanc?®, J. Payet, R. De Maria, and S. D. Fartoukh, “High Luminosity LHC Matching Section Layout vs Crab Cavity Voltage”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI001, pp. 1328-1330.
- S. Aderhold, “Optical Inspection of SRF Cavities at DESY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC005, pp. 2896-2898.
- M. Marie-Jeanne et al., “Status of the SEISM Experiment”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEZO01, pp. 111-113.
- R. Alemany-Fernandez, F. Follin, and R. Jacobsson, “The LHCb Online Luminosity Control and Monitoring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI010, pp. 1346-1348.
- A. V. Aleksandrov et al., “High-Dynamic-Range Current Measurements in the Medium-Energy Beta Transport Line at the Spallation Neutron Source”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP002, pp. 244-246.
- S. Redaelli et al., “Experience with High-intensity Beam Scraping and Tail Populations at the Large Hadon Collider”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO039, pp. 978-980.
- D. Wollmann, R. Schmidt, J. Wenninger, and M. Zerlauth, “Machine Protection at the LHC - Experience of Three Years Running and Outlook for Operation at Nominal Energy”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA046, pp. 3246-3248.
- W. P. Chai, J. Shi, J. W. Xia, and J. C. Yang, “Study of Charge Exchange Injection in HITFiL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS044, pp. 3520-3522.
- E. Gschwendtner et al., “The AWAKE Experimental Facility at CERN”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 582-585.
- A. I. Dzergach, V. S. Kabanov, A. M. Sessler, and J. S. Wurtele, “About the Realization of Laser Acceleration Schemes based on Plasmoids in RF Wells”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP46C, pp. 821-823.
- S. Lederer et al., “Photocathodes at FLASH”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP029, pp. 625-627.
- D. J. Harding et al., “Design and Fabrication of a Multi-element Corrector Magnet for the Fermilab Booster Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS006, pp. 452-454.
- H. Nishimura and T. Scarvie, “Estimation of the Effective Magnet Misalignments of the ALS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE062, pp. 3559-3560.
- P. Murcek et al., “Modified 3+1/2 Cell SC Cavity Made of Large Grain Niobium for the FZD SRF Photoinjector”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO022, pp. 585-588.
- G. H. Hoffstaetter and A. Stocchi, “ERL17 Workshop, WG3 Summary: Test Facilities Around the World”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 80-80.
- W. H?Âfle et al., “Impact of a Wideband Feedback Prototype System on TMCI in the SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1208-1211.
- M. L. Lozano, N. Bidault, E. Fadakis, M. A. Fraser, E. Matli, and J. A. Rodriguez, “Characterization of the Beam Energy Spread at the REX/HIE-ISOLDE Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 787-789.
- S. J. Park et al., “Physics and Engineering Issues of PPI (Pohang Photo-Injector) for PAL XFEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP054, pp. XX-XX.
- G. Papotti et al., “Observation of Bunch to Bunch Differences due to Beam-beam Effects”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ023, pp. 1855-1857.
- D. Schmied, E. Burtin, J. M. Chaize, R. Kersevan, I. Parat, and P. V. Verdier, “Presentation of the New ESRF Vacuum Control Applications from an Operational Point of View”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP012, pp. 1550-1552.
Back to search