Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 540-544.
[n] A. Castilla and J. R. Delayen, “Multipacting Optimization of a 750 MHz RF Dipole”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP112, pp. 1111-1113.
[n] M. Wake et al., “Switching Power Supply for Induction Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN042, pp. 251-253.
[n] J. M. Grames et al., “Lifetime Measurements of High Polarization Strained-Superlattice Gallium Arsenide at Beam Current > 1 Milliamp using a New 100kV Load Lock Photogun”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS064, pp. 3130-3132.
[n] M. V. Zumbro et al., “DARHT Second Axis - Status and Plans”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU406, pp. 314-316.
[n] F. Claus et al., “Observation, Control and Modal Analysis of Coupled-Bunch Longitudinal Instabilities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO05A, pp. 346-348.
[n] J. F. DeFord, B. L. Held, and K. J. Willis, “Improved Algorithms for Multipacting Simulation in the Analyst Code”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP159, pp. 1785-1787.
[n] A. Chan, G. Crane, I. MacGregor, and S. Meyer, “Data Warehouse on the Web for Accelerator Fabrication and Maintenance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5C005, pp. 2413-2415.
[n] G. Martinsen, S. Acharya, M. Allen, E. Faught, K. Low, and J. Sage, “Initial Control of the H-Ion Source at the Superconducting Super Collider Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1365-1368.
[n] F. E. Merrill et al., “Imaging Systems for 800 MeV Proton Radiography”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4057-4059. doi:10.18429/JACoW-IPAC2014-FRXBA01
[n] R. L. Geng, A. Crawford, G. Eremeev, H. Padamsee, and J. Sears, “A 1500MHz Niobium Cavity Made of Electropolished Half-Cells”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB050, pp. 1312-1313.
[n] W. Barry, S. Chattopadhyay, J. Edighoffer, and S. Fornaca, “Field Profile and Loading Measurements on Higher Order Modes in a Two Cell 500 MHz Superconducting Structure”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-39, pp. 151-153.
[n] E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 406-410. doi:10.18429/JACoW-ICALEPCS2017-TUPHA016
[n] J. H. Kamperschroer, J. D. Sherman, T. J. Zaugg, A. H. Arvin, A. S. Bolt, and M. C. Richards, “Doppler-Shift Proton Fraction Measurement on a CW Proton Injector”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4051, pp. 511-513.
[n] S. Pissanetzky, M. Fan, G. R. Kalbfleish, and E. Whalen, “MAGNUS: A Computer Program for 3-D Magnet Design”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1678-1681.
[n] J. F. DeFord and G. Kamin, “Application of Linear Magnetic Loss Model of Ferrite to Induction Cavity Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU430, pp. 384-386.
[n] C. C. Lo and B. Taylor, “Computer-Aided Studies of the ALS 500 MHz Storage Ring Cavity”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 121-124.
[n] K. R. Prestwich, “Nereus, A 250 kV, 80 kA Electron Beam Generator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 493-496.
[n] R. Bork, C. Grubb, G. Lahti, E. Navarro, J. Sage, and T. Moore, “CEBAF Control System”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-41, pp. 415-417.
[n] F. Giacuzzo and J. Miertusova, “How to Save Money Designing a Vacuum System for a Third Generation Synchrotron Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP082L, pp. 2527-2529.
[n] P. G. O et al., “The Bear Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1462-1465.
[n] Ph. Legou, “A New High Rate Charged Particles Detector”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBZ03, pp. 256-258.
[n] S. Humphries Jr, J. R. Freeman, and T. R. Lockner, “High Intensity Ion Accelerators for Inertial Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3410-3413.
[n] M. Ferianis, T. Monaci, and R. Passini, “The Optics of the ELETTRA Transverse Profile Monitor”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1640-1643.
[n] M. Viti et al., “Recent Upgrades of the Bunch Arrival Time Monitors at FLASH and European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 695-698. doi:10.18429/JACoW-IPAC2017-MOPIK072
[n] V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
[n] D. Liska, R. Brown, J. Cost, and R. Kraus, “The Development of Small-Scale Quadrupoles to Operate at 20 to 50 K”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-53, pp. 445-447.
[n] J. Miertusova, “Vacuum Performance Characteristic of a 5m-long Pump Free Insertion Device Vacuum Chamber for ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP19C, pp. 2190-2192.
[n] J. Paul Farrell, V. Dudnikov, and G. Dudnikova, “Optimization of Surface Plasma sources for Efficient Production of Negative Ions with High Emission Current Density”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-06, pp. XX-XX.
[n] R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
[n] H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420.
[n] M. Clinnick, J. Greer, J. Guggemos, R. Kilgore, and D. Rondeau, “Digital Controlled Frequency for Synchrotron Acceleration”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1261-1265.
[n] M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022.
[n] C. L. Fink, J. W. Meadows, and D. L. Smith, “Use of a High-Current Accelerator (CWDD) for Neutron Radiography”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 547-550.
[n] J. M. Grames et al., “Two Wien Filter Spin Flipper”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP025, pp. 862-864.
[n] R. B. Miller, R. J. Faehl, T. C. Genoni, and W. A. Proctor, “Collective Ion Accelerators in a Traveling Virtual Cathode”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1648-1651.
[n] C. Hovater et al., “The LCLS-II LLRF System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1195-1197. doi:10.18429/JACoW-IPAC2015-MOPWI021
[n] W. Cichalewski et al., “The RF Protection Interlock System Prototype Verification”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1406-1410. doi:10.18429/JACoW-ICALEPCS2023-THPDP041
[n] T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Application of Non-Linear Time-Domain RF Simulations to Longitudinal Emittance Studies for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP095, pp. 2234-2236.
[n] L. P. Chau, M. Droba, N. S. Joshi, O. Meusel, U. Ratzinger, and C. Wiesner, “One Nano-second Bunch Compressor for High Intense Proton Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP091, pp. 3578-3580.
[n] A. C. Paul et al., “DARHT-II Energy Analyzer”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB055, pp. 2533-2535.
[n] S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960.
[n] M. G. Mazarakis et al., “Acceleration, Ion Focusing (IFR) and Transport Experiments with Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-03, pp. 299-301.
[n] A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
[n] C. J. Bocchetta et al., “One and a Half Years of Experience with the Operation of the Synchrotron Light Source ELETTRA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR21, pp. 309-311.
[n] D. Liska, L. Carlisle, R. Garnett, T. Larkin, G. Lawrence, and P. Smith, “Mechanical Features of a 700-MHz Bridge-Coupled Drift-Tube Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-38, pp. 148-150.
[n] J. Kewisch et al., “Accelerator Simulation and Operation Via Identical Operational Interfaces”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1443-1446.
[n] A. Castilla and J. R. Delayen, “Analysis of a 750 MHz SRF Dipole Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB047, pp. 1200-1204.
[n] M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
[n] R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317.
[n] R. F. Koontz, “CID Thermionic Gun System”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B10, pp. 62-64.
[n] W. Decking and F. Obier, “Layout of the Beam Switchyard at the European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC073, pp. 2163-2165.
[n] D. Spence and K. R. Lykke, “Production of Negative Hydrogen and Deuterium Ions in Microwave-Driven Ion Sources”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4048, pp. 508-510.
[n] S. Shen et al., “Design and Analysis of Vacuum Pumping Systems for Spallation Neutron Source Drift-Tube Linac and Coupled-Cavity Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH048, pp. 2198-2200.
[n] B. Marchetti et al., “ARES: Accelerator Research Experiment at SINBAD”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1469-1471. doi:10.18429/JACoW-IPAC2015-TUPWA029
[n] J. Sebek, A. Hill, J. Judkins, A. Krasnykh, S. Park, and H. Schwarz, “SPEAR 2 RF System Loads”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH072, pp. 939-941.
[n] N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
[n] O. R. Sander, F. O. Purser, and D. P. Rusthoi, “Operational Parameters of a 2.0 MeV RFQ”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0004, pp. 54-55.
[n] R. Garnett, T. Larkin, G. Lawrence, and D. Liska, “Design and Simulation of a Bridge-Coupled DTL Structure for the 20-80 MeV Region of a Proton Linac for Accelerator Transmutation of Waste”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-68, pp. 802-804.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 540-544.
- A. Castilla and J. R. Delayen, “Multipacting Optimization of a 750 MHz RF Dipole”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP112, pp. 1111-1113.
- M. Wake et al., “Switching Power Supply for Induction Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN042, pp. 251-253.
- J. M. Grames et al., “Lifetime Measurements of High Polarization Strained-Superlattice Gallium Arsenide at Beam Current > 1 Milliamp using a New 100kV Load Lock Photogun”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS064, pp. 3130-3132.
- M. V. Zumbro et al., “DARHT Second Axis - Status and Plans”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU406, pp. 314-316.
- F. Claus et al., “Observation, Control and Modal Analysis of Coupled-Bunch Longitudinal Instabilities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEO05A, pp. 346-348.
- J. F. DeFord, B. L. Held, and K. J. Willis, “Improved Algorithms for Multipacting Simulation in the Analyst Code”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP159, pp. 1785-1787.
- A. Chan, G. Crane, I. MacGregor, and S. Meyer, “Data Warehouse on the Web for Accelerator Fabrication and Maintenance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5C005, pp. 2413-2415.
- G. Martinsen, S. Acharya, M. Allen, E. Faught, K. Low, and J. Sage, “Initial Control of the H-Ion Source at the Superconducting Super Collider Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1365-1368.
- F. E. Merrill et al., “Imaging Systems for 800 MeV Proton Radiography”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4057-4059.
- R. L. Geng, A. Crawford, G. Eremeev, H. Padamsee, and J. Sears, “A 1500MHz Niobium Cavity Made of Electropolished Half-Cells”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB050, pp. 1312-1313.
- W. Barry, S. Chattopadhyay, J. Edighoffer, and S. Fornaca, “Field Profile and Loading Measurements on Higher Order Modes in a Two Cell 500 MHz Superconducting Structure”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-39, pp. 151-153.
- E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 406-410.
- J. H. Kamperschroer, J. D. Sherman, T. J. Zaugg, A. H. Arvin, A. S. Bolt, and M. C. Richards, “Doppler-Shift Proton Fraction Measurement on a CW Proton Injector”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4051, pp. 511-513.
- S. Pissanetzky, M. Fan, G. R. Kalbfleish, and E. Whalen, “MAGNUS: A Computer Program for 3-D Magnet Design”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1678-1681.
- J. F. DeFord and G. Kamin, “Application of Linear Magnetic Loss Model of Ferrite to Induction Cavity Simulation”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU430, pp. 384-386.
- C. C. Lo and B. Taylor, “Computer-Aided Studies of the ALS 500 MHz Storage Ring Cavity”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 121-124.
- K. R. Prestwich, “Nereus, A 250 kV, 80 kA Electron Beam Generator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 493-496.
- R. Bork, C. Grubb, G. Lahti, E. Navarro, J. Sage, and T. Moore, “CEBAF Control System”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-41, pp. 415-417.
- F. Giacuzzo and J. Miertusova, “How to Save Money Designing a Vacuum System for a Third Generation Synchrotron Light Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP082L, pp. 2527-2529.
- P. G. O et al., “The Bear Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1462-1465.
- Ph. Legou, “A New High Rate Charged Particles Detector”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBZ03, pp. 256-258.
- S. Humphries Jr, J. R. Freeman, and T. R. Lockner, “High Intensity Ion Accelerators for Inertial Fusion”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3410-3413.
- M. Ferianis, T. Monaci, and R. Passini, “The Optics of the ELETTRA Transverse Profile Monitor”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1640-1643.
- M. Viti et al., “Recent Upgrades of the Bunch Arrival Time Monitors at FLASH and European XFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 695-698.
- V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
- D. Liska, R. Brown, J. Cost, and R. Kraus, “The Development of Small-Scale Quadrupoles to Operate at 20 to 50 K”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-53, pp. 445-447.
- J. Miertusova, “Vacuum Performance Characteristic of a 5m-long Pump Free Insertion Device Vacuum Chamber for ELETTRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP19C, pp. 2190-2192.
- J. Paul Farrell, V. Dudnikov, and G. Dudnikova, “Optimization of Surface Plasma sources for Efficient Production of Negative Ions with High Emission Current Density”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-06, pp. XX-XX.
- R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
- H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420.
- M. Clinnick, J. Greer, J. Guggemos, R. Kilgore, and D. Rondeau, “Digital Controlled Frequency for Synchrotron Acceleration”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1261-1265.
- M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022.
- C. L. Fink, J. W. Meadows, and D. L. Smith, “Use of a High-Current Accelerator (CWDD) for Neutron Radiography”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 547-550.
- J. M. Grames et al., “Two Wien Filter Spin Flipper”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP025, pp. 862-864.
- R. B. Miller, R. J. Faehl, T. C. Genoni, and W. A. Proctor, “Collective Ion Accelerators in a Traveling Virtual Cathode”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1648-1651.
- C. Hovater et al., “The LCLS-II LLRF System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1195-1197.
- W. Cichalewski et al., “The RF Protection Interlock System Prototype Verification”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP041, pp. 1406-1410.
- T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Application of Non-Linear Time-Domain RF Simulations to Longitudinal Emittance Studies for the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP095, pp. 2234-2236.
- L. P. Chau, M. Droba, N. S. Joshi, O. Meusel, U. Ratzinger, and C. Wiesner, “One Nano-second Bunch Compressor for High Intense Proton Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP091, pp. 3578-3580.
- A. C. Paul et al., “DARHT-II Energy Analyzer”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB055, pp. 2533-2535.
- S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960.
- M. G. Mazarakis et al., “Acceleration, Ion Focusing (IFR) and Transport Experiments with Recirculating Linear Accelerator (RLA)”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-03, pp. 299-301.
- A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
- C. J. Bocchetta et al., “One and a Half Years of Experience with the Operation of the Synchrotron Light Source ELETTRA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR21, pp. 309-311.
- D. Liska, L. Carlisle, R. Garnett, T. Larkin, G. Lawrence, and P. Smith, “Mechanical Features of a 700-MHz Bridge-Coupled Drift-Tube Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-38, pp. 148-150.
- J. Kewisch et al., “Accelerator Simulation and Operation Via Identical Operational Interfaces”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1443-1446.
- A. Castilla and J. R. Delayen, “Analysis of a 750 MHz SRF Dipole Cavity”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB047, pp. 1200-1204.
- M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
- R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317.
- R. F. Koontz, “CID Thermionic Gun System”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B10, pp. 62-64.
- W. Decking and F. Obier, “Layout of the Beam Switchyard at the European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC073, pp. 2163-2165.
- D. Spence and K. R. Lykke, “Production of Negative Hydrogen and Deuterium Ions in Microwave-Driven Ion Sources”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4048, pp. 508-510.
- S. Shen et al., “Design and Analysis of Vacuum Pumping Systems for Spallation Neutron Source Drift-Tube Linac and Coupled-Cavity Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH048, pp. 2198-2200.
- B. Marchetti et al., “ARES: Accelerator Research Experiment at SINBAD”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1469-1471.
- J. Sebek, A. Hill, J. Judkins, A. Krasnykh, S. Park, and H. Schwarz, “SPEAR 2 RF System Loads”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH072, pp. 939-941.
- N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
- O. R. Sander, F. O. Purser, and D. P. Rusthoi, “Operational Parameters of a 2.0 MeV RFQ”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0004, pp. 54-55.
- R. Garnett, T. Larkin, G. Lawrence, and D. Liska, “Design and Simulation of a Bridge-Coupled DTL Structure for the 20-80 MeV Region of a Proton Linac for Accelerator Transmutation of Waste”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-68, pp. 802-804.
Back to search