Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Bacher, “Renovating and Upgrading the Web2cToolkit Suite: A Status Report”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FCO201, pp. 231-233.
[n] C. Gruen, S. Schreiber, and T. Schulz, “A Laser Pulse Controller for the Injector Laser at FLASH and European XFEL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 882-884. doi:10.18429/JACoW-LINAC2016-THPLR019
[n] L. Fr?Âhlich et al., “Multi-Beamline Operation at the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 335-338. doi:10.18429/JACoW-FEL2019-WEP008
[n] R. W. Hasse and M. Steck, “Ordered Ion Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOBF201, pp. 274-276.
[n] J. Bigolas et al., “The Lillyput" - Mobile Electron Linear Accelerator for Radiography and its Use in Testing of Civil Engineering Objects"”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2658-2661.
[n] K. M. Crowe and R. P. Haddock, “The Effect of Duty Cycle on the Research Potential of Pion Factories”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D05, pp. XX-XX.
[n] W. Decking and F. Obier, “Layout of the Beam Switchyard at the European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC073, pp. 2163-2165.
[n] S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2474-2476. doi:10.18429/JACoW-IPAC2014-WEPRI001
[n] B. E. J. Scheible, W. Ackermann, M. K. Czwalinna, H. De Gersem, A. Penirschke, and H. Schlarb, “Wakefield Studies for a Bunch Arrival-Time Monitor Concept with Rod-Shaped Pickups on a Printed Circuit Board for X-Ray Free-Electron Lasers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 271-274. doi:10.18429/JACoW-IPAC2022-MOPOPT019
[n] W. M. Daqa, I. Hofmann, and J. Struckmeier, “Skew Quadrupole Effects on Multi-turn injection Efficiency in the SIS18”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS033, pp. 3490-3492.
[n] M.-E. Couprie et al., “quot;ARC-EN-CIELquot; a Proposal for a 4th Generation Light Source in France”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF030, pp. 366-368.
[n] S. Wilkes et al., “Isolating the light of a single bunch: determining the viability of operating vertical-plane Pulse Picking by Resonant Excitation at Diamond-II to serve timing mode users”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 308-314. doi:10.18429/JACoW-IBIC2025-TUBC01
[n] Y. J. Lee, J. Montross, J. Mach, and T. Muth, “Diffusion bonding of tungsten-vanadium-zirconium using vacuum hot pressing for the development of a low decay heat cladding solution for tungsten spallation targets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3837-3840. doi:10.18429/JACoW-IPAC2024-THPS44
[n] T. Vinatier, C. Bruni, S. Chanc?®, and P. M. Puzo, “Length Measurement of High-brightness Electron Beam thanks to the 3-Phase Method”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3459-3461. doi:10.18429/JACoW-IPAC2014-THPME095
[n] R. W. Hasse, “Theoretical Verification of Coulomb Strings of Ions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A07, pp. 1241-1243.
[n] T. Zolkin, B. Cathey, and S. Nagaitsev, “Axially symmetric e-lens based on McMillan map”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 721-724. doi:10.18429/JACoW-IPAC2024-MOPS12
[n] F. Obier, W. Decking, M. H??ning, and J. Wortmann, “Long Pulse Kicker for European XFEL Beam Distribution”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 357-359. doi:10.18429/JACoW-FEL2019-WEP014
[n] R. Johnson et al., “An RF ion source and accelerator for production of novel isotopes”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB097, unpublished.
[n] D. Garzella, O. Gobert, Ph. Hollander, F. Lepetit, T. Oksenhendler, and M. Perdrix, “Temporal Analysis and Shape Control of UV High Energy Laser Pulses for Photoinjectors”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH001, pp. 552-555.
[n] R. P. Haddock, “Meson Acceleration in Cyclic Machines”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H07, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Bacher, “Renovating and Upgrading the Web2cToolkit Suite: A Status Report”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FCO201, pp. 231-233.
- C. Gruen, S. Schreiber, and T. Schulz, “A Laser Pulse Controller for the Injector Laser at FLASH and European XFEL”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 882-884.
- L. Fr?Âhlich et al., “Multi-Beamline Operation at the European XFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 335-338.
- R. W. Hasse and M. Steck, “Ordered Ion Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOBF201, pp. 274-276.
- J. Bigolas et al., “The Lillyput" - Mobile Electron Linear Accelerator for Radiography and its Use in Testing of Civil Engineering Objects"”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2658-2661.
- K. M. Crowe and R. P. Haddock, “The Effect of Duty Cycle on the Research Potential of Pion Factories”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63D05, pp. XX-XX.
- W. Decking and F. Obier, “Layout of the Beam Switchyard at the European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC073, pp. 2163-2165.
- S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2474-2476.
- B. E. J. Scheible, W. Ackermann, M. K. Czwalinna, H. De Gersem, A. Penirschke, and H. Schlarb, “Wakefield Studies for a Bunch Arrival-Time Monitor Concept with Rod-Shaped Pickups on a Printed Circuit Board for X-Ray Free-Electron Lasers”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 271-274.
- W. M. Daqa, I. Hofmann, and J. Struckmeier, “Skew Quadrupole Effects on Multi-turn injection Efficiency in the SIS18”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS033, pp. 3490-3492.
- M.-E. Couprie et al., “quot;ARC-EN-CIELquot; a Proposal for a 4th Generation Light Source in France”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF030, pp. 366-368.
- S. Wilkes et al., “Isolating the light of a single bunch: determining the viability of operating vertical-plane Pulse Picking by Resonant Excitation at Diamond-II to serve timing mode users”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 308-314.
- Y. J. Lee, J. Montross, J. Mach, and T. Muth, “Diffusion bonding of tungsten-vanadium-zirconium using vacuum hot pressing for the development of a low decay heat cladding solution for tungsten spallation targets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS44, pp. 3837-3840.
- T. Vinatier, C. Bruni, S. Chanc?®, and P. M. Puzo, “Length Measurement of High-brightness Electron Beam thanks to the 3-Phase Method”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3459-3461.
- R. W. Hasse, “Theoretical Verification of Coulomb Strings of Ions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A07, pp. 1241-1243.
- T. Zolkin, B. Cathey, and S. Nagaitsev, “Axially symmetric e-lens based on McMillan map”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS12, pp. 721-724.
- F. Obier, W. Decking, M. H??ning, and J. Wortmann, “Long Pulse Kicker for European XFEL Beam Distribution”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 357-359.
- R. Johnson et al., “An RF ion source and accelerator for production of novel isotopes”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB097, unpublished.
- D. Garzella, O. Gobert, Ph. Hollander, F. Lepetit, T. Oksenhendler, and M. Perdrix, “Temporal Analysis and Shape Control of UV High Energy Laser Pulses for Photoinjectors”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH001, pp. 552-555.
- R. P. Haddock, “Meson Acceleration in Cyclic Machines”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H07, pp. XX-XX.
Back to search