JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Ito, H. Matsuzaki, and A. Morita, “Development of NRA System for a 1.7MV Tandem Accelerator-Human Resource Development Program for Nuclear Engineering, The University of Tokyo”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB01, pp. 115-117. 
[n]	W. K. Withanage et al., “Development of Nb3sn Coatings Using Bronze Routes for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPFDV003, pp.. 
[n]	W. Schott, H. Daniel, H. Hagn, W. Wilhelm, and H. Zinner, “Phase-Free Acceleration of Charged Particles Using Rectangular Drift Tube-Loaded Cavities”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1337-1341. 
[n]	S. Zhao et al., “RF System Experience for FRIB Half Wave Resonators”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 226. doi:10.18429/JACoW-SRF2021-MOPTEV010
[n]	S. Michizono et al., “Vector-Sum Control of Superconducting RF Cavities at STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP083, pp. 2204-2206. 
[n]	F. F. Van der Veken and M. Giovannozzi, “Scaling Laws for the Time Dependence of Luminosity in Hadron Circular Accelerators based on Simple Models of Dynamic Aperture Evolution”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 260-265. doi:10.18429/JACoW-HB2018-WEP2PO002
[n]	A. Cours, “Cable Insulation Breakdowns in the Modulator with a Switch Mode High Voltage Power Supply”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP46, pp. 709-711. 
[n]	G. A. Naylor and B. Joly, “Determination of Beam Charge Using Stripline Signals at the RF Frequency by Fast Signal Processing in a FPGA”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT005, pp. XX-XX. 
[n]	T. Matsumoto, Y. Furukawa, and M. Ishii, “Next-Generation MADOCA for The SPring-8 Control Framework”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB01, pp. 944-947. 
[n]	A. Deyhim, J. D. Kulesza, C. Diao, and H. O. Moser, “Development of a Super-Mini Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP239, pp. 1274-1276. 
[n]	D. P. Gurd, D. R. Heywood, and C. J. Kost, “The TRIUMF Data Interface”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1801-1804. 
[n]	B. Goddard et al., “Beam Commissioning of the SPS LSS6 Extraction and TT60 for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN098, pp. 1610-1612. 
[n]	A. Miura, Y. Kawane, N. Kikuzawa, T. Maruta, and T. Miyao, “Interlock of Beam Loss at Low Energy Part of J-PARC Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 405-408. doi:10.18429/JACoW-ICALEPCS2015-MOPGF137
[n]	W. Li, C. Diao, J. Y. Li, and G. Liu, “The Control System of HLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH018, pp. 809-810. 
[n]	R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015. 
[n]	R. Bartolini, C. Christou, I. P. S. Martin, J. H. Rowland, and B. Singh, “High-level Software for Diamond Commissioning and Operation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH112, pp. 3065-3067. 
[n]	M. Huck, J. Bahrdt, H. Huck, A. Meseck, and M. Ries, “Transverse Broad-band Impedance Studies of the New In-vacuum Cryogenic Undulator at Bessy II Storage Ring”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 263-267. doi:10.18429/JACoW-IBIC2020-THPP26
[n]	J. Staples, “RFQ's in Research and Industry”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE2-1, pp. 227-231. 
[n]	G. Dutto et al., “Developments at TRIUMF”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1653-1656. 
[n]	R. Kersevan, M. Hahn, I. Parat, and D. Schmied, “Status of the ESRF Vacuum System from an Operational Point of View”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP011, pp. 375-377. 
[n]	P. Emma and W. Spence, “Grid Scans: A Transfer Map Diagnostic”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1549-1552. 
[n]	H. Ishimaru et al., “Operational Characteristics of the 30 GeV Electron-Positron Collider, TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1597-1600. 
[n]	R. Stover, R. Dwinell, J. Halliwell, I. Lutz, and M. Nyman, “A Raster Scanning Power Supply System fo Controlling Relativistic Heavy Ion Beams at the Bevalac Biomedical Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1410-1413. 
[n]	R. Wehrle, S. Kim, and R. Nielsen, “Vacuum System Development Status for the APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 583-586. 
[n]	J. Petter, J. Marriner, and D. McGinnis, “Novel Stochastic Cooling Pickups/Kickers”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 636-639. 
[n]	R. Lange et al., “Five years of EPICS 7 - Status Update and Roadmap”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1087-1092. doi:10.18429/JACoW-ICALEPCS2023-TH1BCO01
[n]	S. Lueders, “Securing Control Systems against Cyber Attacks”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1RAI02, pp. 1785-1789. 
[n]	M. Martinello, M. Checchin, F. Furuta, A. Grassellino, A. V. Netepenko, and A. S. Romanenko, “Vortex Dissipation Study in the Low RF Field Regime”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPFDV002, pp.. 
[n]	D. Xiang, Z. Huang, D. F. Ratner, and G. V. Stupakov, “Feasibility Study for a Seeded Hard X-ray Source Based on a Two-Stage Echo-Enabled Harmonic Generation FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC79, pp. 192-195. 
[n]	D. L. Turner, “eDT and Model-based Configuration of 12 GeV CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1259-1261. doi:10.18429/JACoW-IPAC2015-MOPWI046
[n]	J. F. Chen et al., “Passband Modes Excitation Triggered by Field Emission in ESS Medium Beta Cavity Prototype”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 489-493. doi:10.18429/JACoW-SRF2017-TUPB047
[n]	E. C. Longhi, R. Bartolini, R. T. Fielder, I. P. S. Martin, J. C. Schouten, and B. Singh, “First Year's Experience of Diamond Insertion Devices”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC119, pp. 2285-2287. 
[n]	B. D. Muratori, J. K. Jones, K. A. Dewhurst, and H. L. Owen, “High Acceptance Beamline for the Capture of a Laser Wakefield Accelerated Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3456-3459. doi:10.18429/JACoW-IPAC2018-THPAK094
[n]	K. L. Mahoney and H. P. Robertson, “Emerging Standards with Application to Accelerator Safety Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P063, pp. 3684-3686. 
[n]	Y. G. Song et al., “Development of a Machine Protection System for KOMAC Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 334-336. doi:10.18429/JACoW-ICALEPCS2017-TUMPA02

For LaTeX

Use Complete Form

For BibTeX

References

Back to search