Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Newberger et al., “Applicaton of Novel Material in Crystal Accelerator Concepts”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 630-633.
[n] M. J. Lee and J. Wu, “Optimal Control of Electron Beam Parameters and Machine Setting with a New Nonlinear Program”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP026, pp. 4823-4825.
[n] S. M. Shajedul Hasan, J. Tang, K. Kasemir, Y. W. Kang, M. Crofford, and M. K. Howlader, “EPICS Based High Power RF Conditioning Control System for the SNS Accelerator RF Test Facility”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_003.
[n] T. Satogata et al., “Commissioning of RHIC Deuteron-Gold Collisions”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB043, pp. 1706-1708.
[n] V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
[n] D. Kehne, M. Reiser, and H. Rudd, “Experimental Studies of Emittance Growth Due to Initial Mismatch of a Space Charge Dominated Beam in a Solenoidal Focusing Channel”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 248-251.
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n] T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110.
[n] A. Lumpkin et al., “Overall Design Concepts for the APS Storage Ring Machine Protection System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ08, pp. 2467-2469.
[n] G. E. Le Dem and M. Di Giacomo, “A Single Bunch Selector for the Next Low Continuous Wave Heavy Ion Beam”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN008, pp. 158-160.
[n] P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
[n] C. Montag, N. L. D, J. Kewisch, R. Lee, and T. Satogata, “Longitudinal Phase-Space Tomography in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI074, pp. 1942-1944.
[n] L. Acosta, C. Bontoiu, I. Martel, A. R. Pinto G??mez, A. C. C. Villari, and J. Lucas, “Beam Transfer Studies for LINCE Experimental Areas”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3292-3294. doi:10.18429/JACoW-IPAC2014-THPME032
[n] K. Soutome, A. Ando, S. Date, Y. Miyahara, T. Nakamura, and H. Tanaka, “A Local Compensation Scheme for Insertion Devices in the 8 GeV Electron Storage Ring SPring-8”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 660-663.
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Effect of Transverse Radiation Defocusing in Post-Saturation Regime of High-Gain X-Ray Free-Electron Laser”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4418-4421. doi:10.18429/JACoW-IPAC2018-THPMK056
[n] J. C. Cornell, A. H. Botha, J. L. Conradie, D. T. Fourie, A. M??ller, and H. A. Smit, “New Beamlines for Proton Therapy at NAC”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-33, pp. 133-136.
[n] J. Paul Farrell, V. Dudnikov, and G. Dudnikova, “Optimization of Surface Plasma sources for Efficient Production of Negative Ions with High Emission Current Density”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-06, pp. XX-XX.
[n] W. R. Rawnsley, R. E. Laxdal, and A. K. Mitra, “A Non-intercepting Beam Current Monitor for the ISAC-II SC-linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN007, pp. 155-157.
[n] A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4037-4039. doi:10.18429/JACoW-IPAC2017-THPAB135
[n] Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
[n] H. Blosser et al., “Medical Accelerator Projects at Michigan State University”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 742-747.
[n] C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n] C. Widmann et al., “First Tests of a Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 216-219. doi:10.18429/JACoW-IPAC2015-MOPWA045
[n] M. Yu. Vasilyev, A. M. Batrakov, G. A. Fatkin, S. S. Serednyakov, and A. A. Volkov, “Upgrade of Quench Recording System for Multipole Superconducting Wigglers at BINP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 369-371. doi:10.18429/JACoW-RUPAC2018-WEPSB45
[n] Q.-Y. Zhou, Z.-H. Luo, H.-B. Pan, S.-H. Wang, L.-R. Xiao, and Y.-X. Zhang, “Status of the Beijing Proton Linac”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0020, pp. 142-144.
[n] J. B. Rosenzweig, M. J. Hogan, P. Muggli, and G. Travish, “High Frequency, High Gradient Dielectric Wakefield Acceleration Experiments at SLAC and BNL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH02, pp. 3605-3607.
[n] H. Kuboki, J. Takano, M. Tejima, T. Toyama, and S. Hatakeyama, “Beam Based Gain Calibration for Beam Position Monitor at J-PARC Main Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 927-929. doi:10.18429/JACoW-IPAC2015-MOPHA058
[n] H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
[n] B. Parker et al., “Fast Track Actively Shielded Nb3Sn IR Quadrupole R&D”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2398-2400. doi:10.18429/JACoW-IPAC2018-WEPMF014
[n] R. S. Livingston, “Session IV Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
[n] M. K. Grecki et al., “On-Line RF Amplitude and Phase Calibration”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3957-3959. doi:10.18429/JACoW-IPAC2017-THPAB103
[n] L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
[n] N. Yu. Kazarinov and V. I. Kazacha, “Calculation of Second Order Moments for an Ion Beam in a Degrader”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC041, pp. 549-551.
[n] L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 387-390.
[n] S. Isagawa, E. Demmel, G. Jaeger, and M. Yoshida, “Upgrading of High Power Klystron YK1303”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1915-1918.
[n] R. J. England et al., “A High Transformer Ratio Plasma Wakefield Accelerator Scheme for FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP088, pp. 265-267.
[n] S.-H. Wang, J. Corlett, S. M. Lidia, J. Staples, and A. Zholents, “Flat Beam Production in Low Energy Injectors”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG011, pp. 3198-3200.
[n] J. Norem et al., “The Development of Plasma Lenses for Linear Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 627-630.
[n] H. Loos, T. Borden, P. Emma, J. C. Frisch, and J. Wu, “Relative Bunch Length Monitor for the Linac Coherent Light Source (LCLS) using Coherent Edge Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS071, pp. 4189-4191.
[n] A. Zholents, M. Zolotorev, and W. Wan, “Design and Analysis of a Cooling Insertion Lattice for Optical Stochastic Cooling”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V030, pp. 1801-1803.
[n] S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
[n] J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264.
[n] H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
[n] G. F. Burdzik et al., “Decentralization of the NAC Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-05, pp. 422-425.
[n] Y. Nosochkov, T. O. Raubenheimer, and K. A. Thompson, “NLC Beam Properties and Extraction Line Performance with Beam Offset at IP”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH065, pp. 3825-3827.
[n] D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3439-3441. doi:10.18429/JACoW-IPAC2024-THPG70
[n] K. N. Sjobak et al., “Status of the CLEAR Electron Beam User Facility at CERN”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 983-986. doi:10.18429/JACoW-IPAC2019-MOPTS054
[n] M. Champion, “Design, Performance and Production of the Fermilab TESLA RF Input Couplers”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP74, pp. 521-523.
[n] S. Simrock et al., “Demonstration of an ATCA Based LLRF System at FLASH”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP073, pp. 2177-2179.
[n] P. A. Z?ívodszky et al., “First Commissioning Results Of The Susi Ecris”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 283-285.
[n] M. Surman et al., “Electron Diffraction on VELA at Daresbury”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2218-2220. doi:10.18429/JACoW-IPAC2014-WEPRO108
[n] P. Brown, G. Geschonke, H. Henke, and I. Wilson, “Status of the LEP Accelerating Structure”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1128-1131.
[n] S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 572-574. doi:10.18429/JACoW-LINAC2016-TUPLR048
[n] M. A. Kemp et al., “The ILC P2 Marx and Application of the Marx Topology to Future Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP261, pp. 1313-1315.
[n] Y. Hu, C. Tang, H. Chen, D. Tong, and Y. Lin, “The Research of Electron RF Gun Based on X-Band DAW(Disk-and-Washer) Accelerating Structure”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10002, pp. XX-XX.
[n] N. K. Mahale and A. Furman, “Debunching and Capture in the LEB for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 386-389.
[n] B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973.
[n] R. Steinbr?â et al., “Control System Integration of a MicroTCA.4 Based Digital LLRF Using the ChimeraTK OPC UA Adapter”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1811-1814. doi:10.18429/JACoW-ICALEPCS2017-THPHA166
[n] R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
[n] A. L. Gabard, J. P. Duppich, and D. George, “Radiation Hard Magnets at the Paul Scherrer Institute”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD011, pp. 3518-3520.
[n] P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2301-2304.
[n] K.-U. Kasemir, “Control System Studio (CSS) Data Browser”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP009, pp. 99-101.
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 596-599. doi:10.18429/JACoW-IPAC2015-MOPMA025
[n] S. Simrock et al., “Demonstration of an ATCA Based LLRF Control System at FLASH”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB006, pp. 388-390.
[n] C. C. Paulson and R. A. Hartley, “Effect of Tank Sequencing on CCL Accelerators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU409, pp. 321-325.
[n] E. Acerbi, G. Bellomo, M. Castiglioni, C. De Martinis, and E. Fabrici, “Magnetic Field Calculations for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1168-1171.
[n] V. Conforti et al., “Procedures of Software Integration Test and Release for ASTRI SST-2m Prototype Proposed for the Cherenkov Telescope Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 370-374. doi:10.18429/JACoW-ICALEPCS2017-TUPHA004
[n] F. Lemagnen et al., “Production Of Metallic Stable Ion Beams For GANIL And SPIRAL2”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH002, pp. 45-48.
[n] S. Y. Zhang et al., “RHIC Pressure Rise”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT178, pp. 944-946.
[n] B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357.
[n] B. Rusnak et al., “Evaluation of Surface Contamination and Cleaning Techniques on Superconducting RF Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-43, pp. 728-730.
[n] W. H. Tan et al., “Progress update of the X-band Test Area beamline for upcoming experiments”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB072, unpublished.
[n] H. Leboutet, R. Jean, and J. C. Schnuriger, “RF Systems of the CSF 85-Inch Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 217-222.
[n] R. J. Woolliscroft, C. Coles, M. Gerring, and M. R. Pearson, “Quick EXAFS Experiments Using a New GDA Eclipse RCP GUI with EPICS Hardware Control”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS002, pp. 771-774.
[n] P. Yamin, “IBCM: Internal Bunch Coordinate Monitor”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 603-605.
[n] K. Visser and H. W. Mostert, “Vacuum Control Systems at the NAC Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-06, pp. 426-427.
[n] T. Russ, Z. Radouch, and C. Sibley, “A Local Area Computer for Data Acquisition and Control”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1669-1672.
[n] S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
[n] A. Y. Molodozhentsev and E. Forest, “Simulation of Resonances and Beam Loss for the J-PARC Main Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA24, pp. 131-133.
[n] G. G. Gurov and A. Yu. Malovitsky, “Effect of Mains Ripple Harmonics on Longitudinal Emittance of Bunches in the UNK”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 968-971.
[n] S. Kersten et al., “Control, Safety and Diagnostics for Future ATLAS Pixel Detectors”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC050, pp. 679-682.
[n] A. Okano et al., “Development for beam injector using laser-driven ion acceleration”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 596-599. doi:10.18429/JACoW-LINAC2024-THAA002
[n] M. Kesselman, P. Cameron, and J. Cupolo, “Resonant BPM for Continuous Tune Measurement in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH060, pp. 1357-1359.
[n] G. Le Meur and F. Touze, “PRIAM: A Self Consistent Finite Element Code for Particle Simulation in Electromagnetic Fields”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1693-1696.
[n] D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
[n] M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707.
[n] M. Fujieda et al., “Studies of Magnetic Cores for JHF Synchrotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P040, pp. 2992-2994.
[n] C. K. Kim and C. D. Park, “Vacuum Performance of PLS Electron Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP078L, pp. 2521-2523.
[n] S. D. Blot, Y. K. Kim, R. R. M. Fletcher, D. M. Kaplan, and C. T. Rogers, “Proton Contamination Studies in the MICE Muon Beam Line”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ034, pp. 871-873.
[n] E. L?®corch?® and G. S?®n?®cal, “Use of a CMMS Piece of Software to Improve Maintenance Management at Ganil”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP523, pp. XX-XX.
[n] H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
[n] L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 982-985.
[n] N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
[n] N. A. Mezentsev, S. V. Khrushchev, V. K. Lev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Superconducting Multipole Wigglers: State of the Art”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4103-4106. doi:10.18429/JACoW-IPAC2014-WEPRI091
[n] M. Pont, G. Benedetti, J. Moldes, R. Mu??oz Horta, A. Olmos, and F. Perez, “Top-up Operation at ALBA Synchrotron Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 301-303. doi:10.18429/JACoW-IPAC2014-MOPRO090
[n] W. Zhang, L. A. Ahrens, J. L. Mi, B. Oerter, J. Sandberg, and R. Sanders, “RHIC Beam Abort Kicker Power Supply System Commissioning Experience and Remaining Issues”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH021, pp. 3711-3713.
[n] M. Cavenago, M. Comunian, E. Fagotti, T. Kulevoy, S. Petrenko, and M. Poggi, “High Current Ion Sources, Beam Diagnostics and Emittance Measurement”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-06, pp. 341-345.
[n] A. Kisiel, M. B. Jaglarz, M. P. Kope?é, S. Piela, M. J. Stankiewicz, and A. I. Wawrzyniak, “Beta Function Measurement in the SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 736-738. doi:10.18429/JACoW-IPAC2017-MOPIK090
[n] H. F. Weehuizen et al., “The New Distributed Control System of the NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-06, pp. 656-659.
[n] S. D. Jang, Y. G. Son, and J. S. Oh, “Perveance Monitor for Measuring an 80-MW Klystron Characteristics”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16021, pp. XX-XX.
[n] Y. Kim, J. S. Oh, M. H. Cho, I. S. Ko, W. Namkung, and D. Son, “Start-to-End (S2E) Simulation for PAL XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012B, pp. XX-XX.
[n] R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
[n] J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n] G. Guilbaud, H. Leboutet, J. Kervizic, J. P. Mangin, and D. T. Tran, “Preliminary Design of a High Energy High Duty Cycle Proton Linear Accelerator”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART2-1, pp. 123-130.
[n] S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
[n] P. Miller, “STATUS OF THE COUPLED CYCLOTRON FACILITY AT NSCL”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B2, pp. XX-XX.
[n] N. Akaoka et al., “High Intensity Proton Accelerator for Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07G, pp. 746-748.
[n] F. J. Willeke et al., “A Storage Ring Based Option for the LHeC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP052, pp. 2638-2640.
[n] R. Nagaoka, L. Cassinari, M. D. Diop, M.-P. Level, C. Mariette, and R. Sreedharan, “Fast Beam-ion Instability Studies at SOLEIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD028, pp. 1985-1987.
[n] M. H. Cho, S. H. Nam, W. Namkung, and J. S. Oh, “Design of 200 MW Pulse Modulator for PLS 2.0 GeV Electron Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1591-1594.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Newberger et al., “Applicaton of Novel Material in Crystal Accelerator Concepts”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 630-633.
- M. J. Lee and J. Wu, “Optimal Control of Electron Beam Parameters and Machine Setting with a New Nonlinear Program”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP026, pp. 4823-4825.
- S. M. Shajedul Hasan, J. Tang, K. Kasemir, Y. W. Kang, M. Crofford, and M. K. Howlader, “EPICS Based High Power RF Conditioning Control System for the SNS Accelerator RF Test Facility”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_003.
- T. Satogata et al., “Commissioning of RHIC Deuteron-Gold Collisions”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB043, pp. 1706-1708.
- V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
- D. Kehne, M. Reiser, and H. Rudd, “Experimental Studies of Emittance Growth Due to Initial Mismatch of a Space Charge Dominated Beam in a Solenoidal Focusing Channel”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 248-251.
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
- T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110.
- A. Lumpkin et al., “Overall Design Concepts for the APS Storage Ring Machine Protection System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ08, pp. 2467-2469.
- G. E. Le Dem and M. Di Giacomo, “A Single Bunch Selector for the Next Low Continuous Wave Heavy Ion Beam”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN008, pp. 158-160.
- P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
- C. Montag, N. L. D, J. Kewisch, R. Lee, and T. Satogata, “Longitudinal Phase-Space Tomography in RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI074, pp. 1942-1944.
- L. Acosta, C. Bontoiu, I. Martel, A. R. Pinto G??mez, A. C. C. Villari, and J. Lucas, “Beam Transfer Studies for LINCE Experimental Areas”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3292-3294.
- K. Soutome, A. Ando, S. Date, Y. Miyahara, T. Nakamura, and H. Tanaka, “A Local Compensation Scheme for Insertion Devices in the 8 GeV Electron Storage Ring SPring-8”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 660-663.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Effect of Transverse Radiation Defocusing in Post-Saturation Regime of High-Gain X-Ray Free-Electron Laser”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4418-4421.
- J. C. Cornell, A. H. Botha, J. L. Conradie, D. T. Fourie, A. M??ller, and H. A. Smit, “New Beamlines for Proton Therapy at NAC”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-33, pp. 133-136.
- J. Paul Farrell, V. Dudnikov, and G. Dudnikova, “Optimization of Surface Plasma sources for Efficient Production of Negative Ions with High Emission Current Density”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-06, pp. XX-XX.
- W. R. Rawnsley, R. E. Laxdal, and A. K. Mitra, “A Non-intercepting Beam Current Monitor for the ISAC-II SC-linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN007, pp. 155-157.
- A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4037-4039.
- Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
- H. Blosser et al., “Medical Accelerator Projects at Michigan State University”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 742-747.
- C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 413-419.
- C. Widmann et al., “First Tests of a Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 216-219.
- M. Yu. Vasilyev, A. M. Batrakov, G. A. Fatkin, S. S. Serednyakov, and A. A. Volkov, “Upgrade of Quench Recording System for Multipole Superconducting Wigglers at BINP”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 369-371.
- Q.-Y. Zhou, Z.-H. Luo, H.-B. Pan, S.-H. Wang, L.-R. Xiao, and Y.-X. Zhang, “Status of the Beijing Proton Linac”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0020, pp. 142-144.
- J. B. Rosenzweig, M. J. Hogan, P. Muggli, and G. Travish, “High Frequency, High Gradient Dielectric Wakefield Acceleration Experiments at SLAC and BNL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH02, pp. 3605-3607.
- H. Kuboki, J. Takano, M. Tejima, T. Toyama, and S. Hatakeyama, “Beam Based Gain Calibration for Beam Position Monitor at J-PARC Main Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 927-929.
- H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
- B. Parker et al., “Fast Track Actively Shielded Nb3Sn IR Quadrupole R&D”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2398-2400.
- R. S. Livingston, “Session IV Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
- M. K. Grecki et al., “On-Line RF Amplitude and Phase Calibration”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3957-3959.
- L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
- N. Yu. Kazarinov and V. I. Kazacha, “Calculation of Second Order Moments for an Ion Beam in a Degrader”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC041, pp. 549-551.
- L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 387-390.
- S. Isagawa, E. Demmel, G. Jaeger, and M. Yoshida, “Upgrading of High Power Klystron YK1303”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1915-1918.
- R. J. England et al., “A High Transformer Ratio Plasma Wakefield Accelerator Scheme for FACET”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP088, pp. 265-267.
- S.-H. Wang, J. Corlett, S. M. Lidia, J. Staples, and A. Zholents, “Flat Beam Production in Low Energy Injectors”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG011, pp. 3198-3200.
- J. Norem et al., “The Development of Plasma Lenses for Linear Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 627-630.
- H. Loos, T. Borden, P. Emma, J. C. Frisch, and J. Wu, “Relative Bunch Length Monitor for the Linac Coherent Light Source (LCLS) using Coherent Edge Radiation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS071, pp. 4189-4191.
- A. Zholents, M. Zolotorev, and W. Wan, “Design and Analysis of a Cooling Insertion Lattice for Optical Stochastic Cooling”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V030, pp. 1801-1803.
- S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
- J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264.
- H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
- G. F. Burdzik et al., “Decentralization of the NAC Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-05, pp. 422-425.
- Y. Nosochkov, T. O. Raubenheimer, and K. A. Thompson, “NLC Beam Properties and Extraction Line Performance with Beam Offset at IP”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH065, pp. 3825-3827.
- D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG70, pp. 3439-3441.
- K. N. Sjobak et al., “Status of the CLEAR Electron Beam User Facility at CERN”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 983-986.
- M. Champion, “Design, Performance and Production of the Fermilab TESLA RF Input Couplers”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP74, pp. 521-523.
- S. Simrock et al., “Demonstration of an ATCA Based LLRF System at FLASH”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP073, pp. 2177-2179.
- P. A. Z?ívodszky et al., “First Commissioning Results Of The Susi Ecris”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 283-285.
- M. Surman et al., “Electron Diffraction on VELA at Daresbury”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2218-2220.
- P. Brown, G. Geschonke, H. Henke, and I. Wilson, “Status of the LEP Accelerating Structure”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1128-1131.
- S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 572-574.
- M. A. Kemp et al., “The ILC P2 Marx and Application of the Marx Topology to Future Accelerators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP261, pp. 1313-1315.
- Y. Hu, C. Tang, H. Chen, D. Tong, and Y. Lin, “The Research of Electron RF Gun Based on X-Band DAW(Disk-and-Washer) Accelerating Structure”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10002, pp. XX-XX.
- N. K. Mahale and A. Furman, “Debunching and Capture in the LEB for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 386-389.
- B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973.
- R. Steinbr?â et al., “Control System Integration of a MicroTCA.4 Based Digital LLRF Using the ChimeraTK OPC UA Adapter”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1811-1814.
- R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
- A. L. Gabard, J. P. Duppich, and D. George, “Radiation Hard Magnets at the Paul Scherrer Institute”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD011, pp. 3518-3520.
- P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2301-2304.
- K.-U. Kasemir, “Control System Studio (CSS) Data Browser”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP009, pp. 99-101.
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 596-599.
- S. Simrock et al., “Demonstration of an ATCA Based LLRF Control System at FLASH”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB006, pp. 388-390.
- C. C. Paulson and R. A. Hartley, “Effect of Tank Sequencing on CCL Accelerators”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU409, pp. 321-325.
- E. Acerbi, G. Bellomo, M. Castiglioni, C. De Martinis, and E. Fabrici, “Magnetic Field Calculations for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1168-1171.
- V. Conforti et al., “Procedures of Software Integration Test and Release for ASTRI SST-2m Prototype Proposed for the Cherenkov Telescope Array”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 370-374.
- F. Lemagnen et al., “Production Of Metallic Stable Ion Beams For GANIL And SPIRAL2”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH002, pp. 45-48.
- S. Y. Zhang et al., “RHIC Pressure Rise”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT178, pp. 944-946.
- B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357.
- B. Rusnak et al., “Evaluation of Surface Contamination and Cleaning Techniques on Superconducting RF Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-43, pp. 728-730.
- W. H. Tan et al., “Progress update of the X-band Test Area beamline for upcoming experiments”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB072, unpublished.
- H. Leboutet, R. Jean, and J. C. Schnuriger, “RF Systems of the CSF 85-Inch Cyclotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 217-222.
- R. J. Woolliscroft, C. Coles, M. Gerring, and M. R. Pearson, “Quick EXAFS Experiments Using a New GDA Eclipse RCP GUI with EPICS Hardware Control”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS002, pp. 771-774.
- P. Yamin, “IBCM: Internal Bunch Coordinate Monitor”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 603-605.
- K. Visser and H. W. Mostert, “Vacuum Control Systems at the NAC Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-06, pp. 426-427.
- T. Russ, Z. Radouch, and C. Sibley, “A Local Area Computer for Data Acquisition and Control”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1669-1672.
- S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
- A. Y. Molodozhentsev and E. Forest, “Simulation of Resonances and Beam Loss for the J-PARC Main Ring”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA24, pp. 131-133.
- G. G. Gurov and A. Yu. Malovitsky, “Effect of Mains Ripple Harmonics on Longitudinal Emittance of Bunches in the UNK”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 968-971.
- S. Kersten et al., “Control, Safety and Diagnostics for Future ATLAS Pixel Detectors”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC050, pp. 679-682.
- A. Okano et al., “Development for beam injector using laser-driven ion acceleration”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 596-599.
- M. Kesselman, P. Cameron, and J. Cupolo, “Resonant BPM for Continuous Tune Measurement in RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH060, pp. 1357-1359.
- G. Le Meur and F. Touze, “PRIAM: A Self Consistent Finite Element Code for Particle Simulation in Electromagnetic Fields”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1693-1696.
- D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
- M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 703-707.
- M. Fujieda et al., “Studies of Magnetic Cores for JHF Synchrotrons”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P040, pp. 2992-2994.
- C. K. Kim and C. D. Park, “Vacuum Performance of PLS Electron Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP078L, pp. 2521-2523.
- S. D. Blot, Y. K. Kim, R. R. M. Fletcher, D. M. Kaplan, and C. T. Rogers, “Proton Contamination Studies in the MICE Muon Beam Line”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ034, pp. 871-873.
- E. L?®corch?® and G. S?®n?®cal, “Use of a CMMS Piece of Software to Improve Maintenance Management at Ganil”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP523, pp. XX-XX.
- H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
- L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 982-985.
- N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
- N. A. Mezentsev, S. V. Khrushchev, V. K. Lev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Superconducting Multipole Wigglers: State of the Art”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4103-4106.
- M. Pont, G. Benedetti, J. Moldes, R. Mu??oz Horta, A. Olmos, and F. Perez, “Top-up Operation at ALBA Synchrotron Light Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 301-303.
- W. Zhang, L. A. Ahrens, J. L. Mi, B. Oerter, J. Sandberg, and R. Sanders, “RHIC Beam Abort Kicker Power Supply System Commissioning Experience and Remaining Issues”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH021, pp. 3711-3713.
- M. Cavenago, M. Comunian, E. Fagotti, T. Kulevoy, S. Petrenko, and M. Poggi, “High Current Ion Sources, Beam Diagnostics and Emittance Measurement”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-06, pp. 341-345.
- A. Kisiel, M. B. Jaglarz, M. P. Kope?é, S. Piela, M. J. Stankiewicz, and A. I. Wawrzyniak, “Beta Function Measurement in the SOLARIS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 736-738.
- H. F. Weehuizen et al., “The New Distributed Control System of the NAC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-06, pp. 656-659.
- S. D. Jang, Y. G. Son, and J. S. Oh, “Perveance Monitor for Measuring an 80-MW Klystron Characteristics”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16021, pp. XX-XX.
- Y. Kim, J. S. Oh, M. H. Cho, I. S. Ko, W. Namkung, and D. Son, “Start-to-End (S2E) Simulation for PAL XFEL Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20012B, pp. XX-XX.
- R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
- J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566.
- G. Guilbaud, H. Leboutet, J. Kervizic, J. P. Mangin, and D. T. Tran, “Preliminary Design of a High Energy High Duty Cycle Proton Linear Accelerator”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART2-1, pp. 123-130.
- S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
- P. Miller, “STATUS OF THE COUPLED CYCLOTRON FACILITY AT NSCL”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18B2, pp. XX-XX.
- N. Akaoka et al., “High Intensity Proton Accelerator for Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07G, pp. 746-748.
- F. J. Willeke et al., “A Storage Ring Based Option for the LHeC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP052, pp. 2638-2640.
- R. Nagaoka, L. Cassinari, M. D. Diop, M.-P. Level, C. Mariette, and R. Sreedharan, “Fast Beam-ion Instability Studies at SOLEIL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD028, pp. 1985-1987.
- M. H. Cho, S. H. Nam, W. Namkung, and J. S. Oh, “Design of 200 MW Pulse Modulator for PLS 2.0 GeV Electron Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1591-1594.
Back to search