Favourites
For Word
[n] J. LeDuff, “Optimization of TW Accelerating Sections for SLED Type Modes of Operation”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0030, pp. 171-173.
[n] J. E. Richards, K. Ezawa, and R. Keitel, “Configuration Management for Beam Delivery at TRIUMF/ISAC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC002, pp. 1094-1096.
[n] C. R. Prior, J. S. Berg, M. Meddahi, and Y. Mori, “The International Design Study for a Neutrino Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP119, pp. 2773-2775.
[n] J. J. Pon et al., “Controls Interface into the Low-Level RF System in the ARIEL e-Linac at TRIUMF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 346-348. doi:10.18429/JACoW-ICALEPCS2015-MOPGF114
[n] A. A. Mikhailichenko, “Laser Driven Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP155, pp. 2850-2852.
[n] H. Herminghaus et al., “First Operation of the 850 MeV C.W. Electron Accelerator ''MAMI''”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU422, pp. 362-363.
[n] N. Nakamura, “Transverse Resistive-wall Wake of a Round Pipe with Finite Thickness and its Effect on the ERL Multi-bunch Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC060, pp. 202-204.
[n] J. W. McKenzie and B. L. Militsyn, “3D Simulations of a Non-axisymmetric High Average Current DC Photocathode Electron Gun”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC074, pp. 238-240.
[n] J. D. A. Smith, “GdfidL Simulations of International Linear Collider Candidate Collimator Assemblies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP165, pp. 2874-2876.
[n] A. I. Drozhdin, Y. Nosochkov, and F. Zhou, “Beam Collimation Studies for the ILC Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP164, pp. 2871-2873.
[n] A. A. Mikhailichenko, “Lithium Lens for Positron Production System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP157, pp. 2856-2858.
[n] W. T. Weng, A. Chao, and J. Murray, “Analysis of Orbit Perturbations of the SLC Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1361-1364.
[n] A. A. Mikhailichenko, “Spherical Aberrations-free Wiggler”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP156, pp. 2853-2855.
[n] K. Tilley, “Commissioning Status of the MICE Muon Beamline”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP122, pp. 2782-2784.
[n] E. Urazov et al., “Avoiding overcooled ion beams by exciting energy spread through electron cooling”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1546-1548. doi:10.18429/JACoW-IPAC2025-TUPS051
[n] Y. S. Derbenev and R. P. Johnson, “Advances in Parametric-resonance Ionization Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP149, pp. 2838-2840.
[n] G. Goin, J. Vernois, C. Cimeti?¿re, and J. L?®ger, “Iodine-123 Production by Irradiation at the CNRS Cyclotron in Orleans”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-03, pp. 697-698.
[n] R. Fukuoka, K. Ezawa, Y. Koshiba, K. Sakaue, and M. Washio, “Study on the Performance Improvement of Alkali Antimonide Photocathodes for Radio Frequency Electron Guns”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2640-2642. doi:10.18429/JACoW-IPAC2022-THPOPT029
[n] K. Ezawa, R. Fukuoka, Y. Koshiba, K. Sakaue, T. Tamba, and M. Washio, “Study on Durability Improvement of Cs-Te Photocathode by Means of Alkali Halide Protective Films”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2847-2849. doi:10.18429/JACoW-IPAC2021-WEPAB106
[n] B. L. Militsyn et al., “Design of an Upgrade to the ALICE Photocathode Electron Gun”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC073, pp. 235-237.
[n] C. T. Rogers, “Recirculating Ring for an Ionization Cooling Channel”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP121, pp. 2779-2781.
For LaTeX
Use Complete Form
For BibTeX
References
- J. LeDuff, “Optimization of TW Accelerating Sections for SLED Type Modes of Operation”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0030, pp. 171-173.
- J. E. Richards, K. Ezawa, and R. Keitel, “Configuration Management for Beam Delivery at TRIUMF/ISAC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC002, pp. 1094-1096.
- C. R. Prior, J. S. Berg, M. Meddahi, and Y. Mori, “The International Design Study for a Neutrino Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP119, pp. 2773-2775.
- J. J. Pon et al., “Controls Interface into the Low-Level RF System in the ARIEL e-Linac at TRIUMF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 346-348.
- A. A. Mikhailichenko, “Laser Driven Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP155, pp. 2850-2852.
- H. Herminghaus et al., “First Operation of the 850 MeV C.W. Electron Accelerator ''MAMI''”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU422, pp. 362-363.
- N. Nakamura, “Transverse Resistive-wall Wake of a Round Pipe with Finite Thickness and its Effect on the ERL Multi-bunch Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC060, pp. 202-204.
- J. W. McKenzie and B. L. Militsyn, “3D Simulations of a Non-axisymmetric High Average Current DC Photocathode Electron Gun”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC074, pp. 238-240.
- J. D. A. Smith, “GdfidL Simulations of International Linear Collider Candidate Collimator Assemblies”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP165, pp. 2874-2876.
- A. I. Drozhdin, Y. Nosochkov, and F. Zhou, “Beam Collimation Studies for the ILC Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP164, pp. 2871-2873.
- A. A. Mikhailichenko, “Lithium Lens for Positron Production System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP157, pp. 2856-2858.
- W. T. Weng, A. Chao, and J. Murray, “Analysis of Orbit Perturbations of the SLC Arcs”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1361-1364.
- A. A. Mikhailichenko, “Spherical Aberrations-free Wiggler”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP156, pp. 2853-2855.
- K. Tilley, “Commissioning Status of the MICE Muon Beamline”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP122, pp. 2782-2784.
- E. Urazov et al., “Avoiding overcooled ion beams by exciting energy spread through electron cooling”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS051, pp. 1546-1548.
- Y. S. Derbenev and R. P. Johnson, “Advances in Parametric-resonance Ionization Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP149, pp. 2838-2840.
- G. Goin, J. Vernois, C. Cimeti?¿re, and J. L?®ger, “Iodine-123 Production by Irradiation at the CNRS Cyclotron in Orleans”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-03, pp. 697-698.
- R. Fukuoka, K. Ezawa, Y. Koshiba, K. Sakaue, and M. Washio, “Study on the Performance Improvement of Alkali Antimonide Photocathodes for Radio Frequency Electron Guns”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2640-2642.
- K. Ezawa, R. Fukuoka, Y. Koshiba, K. Sakaue, T. Tamba, and M. Washio, “Study on Durability Improvement of Cs-Te Photocathode by Means of Alkali Halide Protective Films”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2847-2849.
- B. L. Militsyn et al., “Design of an Upgrade to the ALICE Photocathode Electron Gun”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC073, pp. 235-237.
- C. T. Rogers, “Recirculating Ring for an Ionization Cooling Channel”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP121, pp. 2779-2781.
Back to search