Favourites
For Word
[n] P. Hartmann, S. Khan, D. Schirmer, G. Sch??nemann, P. Towalski, and T. Weis, “Fast Orbit Feedback for DELTA and FAIR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB031, pp. 2752-2754.
[n] M. McGee, V. T. Bocean, J. Grimm, and W. Schappert, “Transatlantic Transport of Fermilab 3.9 GHZ Cryomodule for TTF/FLASH to DESY”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP022, pp. 592-594.
[n] W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
[n] E. N. Pulliam, I. Dragani, J. L. Medina, J. P. Montross, J. F. O, and L. Rybarcyk, “Thermal Analysis of the LANSCE H? RFQ Test Stand Faraday Cup”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 274-277. doi:10.18429/JACoW-NAPAC2019-MOPLO18
[n] J. Safranek, G. Portmann, and A. Terebilo, “MATLAB-BASED LOCO”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE003, pp. 1184-1186.
[n] T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n] K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2787-2790.
[n] S. Funkner et al., “Implementation of Ultra-Low Frequency Non-Linear Raman Spectroscopy with the Gun Laser at FLUTE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4242-4244. doi:10.18429/JACoW-IPAC2018-THPMF072
[n] P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
[n] R. Ainsworth, S. Chaurize, I. Kourbanis, and E. G. Stern, “Transition Crossing in the Main Injector for PIP-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3347-3349. doi:10.18429/JACoW-IPAC2017-WEPVA039
[n] P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4101-4103. doi:10.18429/JACoW-IPAC2016-THPOY008
[n] S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485.
[n] H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
[n] R. Hessami, A. Marinelli, C. Emma, J. Morgan, K. Larsen, and R. Robles, “Multi-color operation via coherent harmonic generation in a plasma driven attosecond X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1896-1898. doi:10.18429/JACoW-IPAC2023-TUPL062
[n] R. W. Assmann et al., “Beam-Based Monitoring of the SLC Linac Optics with a Diagnostic Pulse”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W024, pp. 497-499.
[n] G. H. Mackenzie, M. Dombsky, W. R. Rawnsley, G. Stanford, Y. Yin, and A. Novikov, “Beam Instrumentation for an ISOL Test Stand”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-35, pp. 298-301.
[n] S. Date, A. Ando, and K. Soutome, “Effects of Thermal Noises on Electron Trajectories in the SPring-8 Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1385-1388.
[n] V. Le Flanchec and P. Balleyguier, “A Phased-locked S.A.M. Mode-locked Laser for the ELSA Photoinjector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH158, pp. 3164-3166.
[n] J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 93-96. doi:10.18429/JACoW-ICAP2015-WEP14
[n] T. Kobayashi et al., “Single Bunched Beam Testing for SPring-8 Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4007, pp. 58-60.
[n] M. W. McGee, J. Grimm, D. R. Olis, and W. Schappert, “Transatlantic Transport of Fermilab 3.9 GHz Cryomodule to DESY”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP052, pp. 1665-1667.
[n] V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977.
[n] V. V. Kapin, B. Y. Bogdanovich, A. Nesterovich, and V. V. Yanenko, “Development of Wire-Meshed Electrostatic Lenses for Proton Linac”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC003, pp. 325-327.
[n] E. Adli et al., “The ESS Target Proton Beam Imaging System as in-Kind Contribution”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3422-3425. doi:10.18429/JACoW-IPAC2017-WEPVA066
[n] B. Kulke et al., “Test Results from the LLNL 250 GHz CARM Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 766-769.
[n] S. Yamada et al., “HIMAC and Medical Accelerator Projects in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 7C001, pp. 885-889.
[n] R. Hettrich et al., “Latest News from Stochastic Cooling Developments for the Collector Ring at FAIR”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 64-67. doi:10.18429/JACoW-COOL2017-TUP16
[n] S. L. Bogomolov et al., “Production and Acceleration of Titanium-50 Ion Beam at the U-400 Cyclotron”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH015, pp. 64-67.
[n] P. Shrivastava, F. Bordry, C. De Almeida Martins, J. Mulchandani, C. Rossi, and V. C. Sahni, “Development of All Solid State Bouncer Compensated Long Pulse Modulators for LEP 1MW Klystrons to be Used for LINAC4 Project at CERN”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP081, pp. 984-986.
[n] N. Yu. Kazarinov, J. Franko, G. G. Gulbekyan, I. A. Ivanenko, and I. V. Kalagin, “Simulation of the Axial Injection Beam Line of the Reconstructed U200 Cyclotron of FLNR JINR”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 319-323. doi:10.18429/JACoW-HB2018-WEP2PO027
For LaTeX
Use Complete Form
For BibTeX
References
- P. Hartmann, S. Khan, D. Schirmer, G. Sch??nemann, P. Towalski, and T. Weis, “Fast Orbit Feedback for DELTA and FAIR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB031, pp. 2752-2754.
- M. McGee, V. T. Bocean, J. Grimm, and W. Schappert, “Transatlantic Transport of Fermilab 3.9 GHZ Cryomodule for TTF/FLASH to DESY”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP022, pp. 592-594.
- W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
- E. N. Pulliam, I. Dragani, J. L. Medina, J. P. Montross, J. F. O, and L. Rybarcyk, “Thermal Analysis of the LANSCE H? RFQ Test Stand Faraday Cup”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 274-277.
- J. Safranek, G. Portmann, and A. Terebilo, “MATLAB-BASED LOCO”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE003, pp. 1184-1186.
- T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1073-1078.
- K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2787-2790.
- S. Funkner et al., “Implementation of Ultra-Low Frequency Non-Linear Raman Spectroscopy with the Gun Laser at FLUTE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4242-4244.
- P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
- R. Ainsworth, S. Chaurize, I. Kourbanis, and E. G. Stern, “Transition Crossing in the Main Injector for PIP-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3347-3349.
- P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4101-4103.
- S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485.
- H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
- R. Hessami, A. Marinelli, C. Emma, J. Morgan, K. Larsen, and R. Robles, “Multi-color operation via coherent harmonic generation in a plasma driven attosecond X-ray source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL062, pp. 1896-1898.
- R. W. Assmann et al., “Beam-Based Monitoring of the SLC Linac Optics with a Diagnostic Pulse”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W024, pp. 497-499.
- G. H. Mackenzie, M. Dombsky, W. R. Rawnsley, G. Stanford, Y. Yin, and A. Novikov, “Beam Instrumentation for an ISOL Test Stand”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-35, pp. 298-301.
- S. Date, A. Ando, and K. Soutome, “Effects of Thermal Noises on Electron Trajectories in the SPring-8 Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1385-1388.
- V. Le Flanchec and P. Balleyguier, “A Phased-locked S.A.M. Mode-locked Laser for the ELSA Photoinjector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH158, pp. 3164-3166.
- J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 93-96.
- T. Kobayashi et al., “Single Bunched Beam Testing for SPring-8 Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4007, pp. 58-60.
- M. W. McGee, J. Grimm, D. R. Olis, and W. Schappert, “Transatlantic Transport of Fermilab 3.9 GHz Cryomodule to DESY”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP052, pp. 1665-1667.
- V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977.
- V. V. Kapin, B. Y. Bogdanovich, A. Nesterovich, and V. V. Yanenko, “Development of Wire-Meshed Electrostatic Lenses for Proton Linac”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC003, pp. 325-327.
- E. Adli et al., “The ESS Target Proton Beam Imaging System as in-Kind Contribution”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3422-3425.
- B. Kulke et al., “Test Results from the LLNL 250 GHz CARM Experiment”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 766-769.
- S. Yamada et al., “HIMAC and Medical Accelerator Projects in Japan”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 7C001, pp. 885-889.
- R. Hettrich et al., “Latest News from Stochastic Cooling Developments for the Collector Ring at FAIR”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 64-67.
- S. L. Bogomolov et al., “Production and Acceleration of Titanium-50 Ion Beam at the U-400 Cyclotron”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH015, pp. 64-67.
- P. Shrivastava, F. Bordry, C. De Almeida Martins, J. Mulchandani, C. Rossi, and V. C. Sahni, “Development of All Solid State Bouncer Compensated Long Pulse Modulators for LEP 1MW Klystrons to be Used for LINAC4 Project at CERN”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP081, pp. 984-986.
- N. Yu. Kazarinov, J. Franko, G. G. Gulbekyan, I. A. Ivanenko, and I. V. Kalagin, “Simulation of the Axial Injection Beam Line of the Reconstructed U200 Cyclotron of FLNR JINR”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 319-323.
Back to search