Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. D'Auria et al., “The X-band System for the FERMI@ELETTRA FEL Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE015, pp. 2173-2175.
[n] G. Penacoba Fernandez et al., “Design of an FPGA-based Radiation Tolerant Agent for WorldFIP Fieldbus”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS102, pp. 1780-1782.
[n] T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449.
[n] R. Gorbonosov, V. Baggiolini, G. Kruk, and M. Zerlauth, “Plug-in Based Analysis Framework for LHC Post-Mortem Analysis”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC143, pp. 446-448.
[n] U. Scheeler et al., “Recommissioning of the Marburg Ion-beam Therapy Centre (MIT) Accelerator Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1908-1910. doi:10.18429/JACoW-IPAC2016-TUPOY004
[n] R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
[n] W. Kutschera, “Accelerator Mass Spectrometry at VERA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEYF101, pp. 245-252.
[n] D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
[n] E. Van der Bij et al., “Open Hardware for CERN's Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAULT04, pp. 554-557.
[n] F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
[n] R. Tomas, S. D. Fartoukh, and J. Serrano, “Reliable Operation of the AC Dipole in the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP026, pp. 2575-2577.
[n] D. Regidor et al., “IFMIF-EVEDA SRF Linac Couplers Test Bench”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO043, pp. 2396-2398.
[n] B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 524-527.
[n] M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
[n] R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126.
[n] K. R. Crandall, R. H. Stokes, and T. P. Wangler, “RF Quadrupole Beam Dynamics Design Studies”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-1, pp. 205-216.
[n] Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3891-3894. doi:10.18429/JACoW-IPAC2016-THPOR046
[n] K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
[n] O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
[n] M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
[n] K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1568-1570. doi:10.18429/JACoW-IPAC2014-TUPRI008
[n] E. S. Fischer, A. Bleile, V. I. Datskov, V. Marusov, J. P. Meier, and P. J. Spiller, “Start of the Series Production for the Cryogenic Magnet Corrector Modules of FAIR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4124-4127. doi:10.18429/JACoW-IPAC2019-THPTS010
[n] S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747.
[n] S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
[n] J. Serrano, “Digital Signal Processing Using Field Programmable Gate Arrays”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper THTTT01, pp. 346-355.
[n] J. K. Sekutowicz, W. C. Grabowski, R. Nietubyc, and T. Wasiewicz, “Shape Optimization of a SRF Injector Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO007, pp. 2322-2324.
[n] S. S. Kurennoy, L. Rybarcyk, and T. P. Wangler, “An H-Mode Accelerator with PMQ Focusing as a LANSCE DTL Replacement”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS067, pp. 2655-2657.
[n] D. J. Newsham, S. A. Bogacz, Y.-C. Chao, Y. S. Derbenev, R. P. Johnson, and R. Sah, “Simulations of Parametric-resonance Ionization Cooling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN094, pp. 2927-2929.
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596.
[n] A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
[n] C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2419-2421. doi:10.18429/JACoW-IPAC2018-WEPMF030
[n] J.-P. Delahaye et al., “A Staged Muon-based Facility to Enable Intensity and Energy Frontier Science in the US”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA20, pp. 565-567.
[n] A. Y. Murokh et al., “Inverse Compton Scattering Experiment in a Bunch Train Regime Using Nonlinear Optical Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB008, pp. 3245-3247.
[n] P. A. Elkiaer et al., “Slow Kicker Magnet System with Energy Recover Pulse Power Supply with Extended Flat Top”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN004, pp. 1395-1397.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107.
[n] S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n] K. Beard, L. Merminga, and B. Yunn, “Tools to Predict Beam Breakup in Recirculating Linacs”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPD006, pp. 332-334.
[n] Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
[n] M. G. Mazarakis et al., “Acceleration, Ion Focusing (IFR) and Transport Experiments with Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-03, pp. 299-301.
[n] S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1731-1733. doi:10.18429/JACoW-IPAC2016-TUPOR030
[n] S. A. Bogacz, K. B. Beard, and R. P. Johnson, “Recirculating Linear Accelerators for Future Muon Facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH01, pp. 3602-3604.
[n] P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115.
[n] Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
[n] S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122.
[n] O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
[n] L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 789-793. doi:10.18429/JACoW-ICALEPCS2017-TUPHA163
[n] T. P. Wangler, “Lumped-Circuit Model of Four-Vane RFQ Resonator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0005, pp. 332-334.
[n] T. P. Wangler, F. W. Guy, and I. Hofmann, “The Influence of Equipartitioning on the Emittance of Intense Charged-Particle Beams”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-36, pp. 340-345.
[n] H. Bluem et al., “Electron Gun and Injector Designs for State-of-the-Art FELs”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP054, pp. XX-XX.
[n] S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
[n] E. S. Fischer et al., “From Design Towards Series - The Superconducting Magnets for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1167-1170. doi:10.18429/JACoW-IPAC2016-TUPMB031
[n] W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3901-3904. doi:10.18429/JACoW-IPAC2015-THPF089
[n] A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
[n] J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 596-599. doi:10.18429/JACoW-IPAC2015-MOPMA025
[n] P. Chitnis, T. G. Robertazzi, K. A. Brown, and C. Theisen, “Quantitative Fault Tree Analysis of the Beam Permit System Elements of Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC076, pp. 269-272.
[n] S. A. Bogacz, “PERLE - Beam Optics Design”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 49-51. doi:10.18429/JACoW-ERL2017-TUIDCC001
[n] S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 540-542. doi:10.18429/JACoW-IPAC2016-MOPMY013
[n] T. Hughes and H. Davis, “Effect of Stimulated and Thermal Desorption in DARHT-2”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA006, pp. 120-122.
[n] F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
[n] L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
[n] Y. S. Derbenev et al., “Achromatic Interaction Point Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP064, pp. 2649-2651.
[n] M. Schedler, F. Frommberger, N. Heurich, W. Hillert, A. Roth, and R. Zimmermann, “First Measurements with Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP059, pp. 2840-2842.
[n] K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 765-769. doi:10.18429/JACoW-ICALEPCS2017-TUPHA153
[n] W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
[n] J. L. Sun et al., “Status of the Beam Instrumentation System of CSNS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 95-97. doi:10.18429/JACoW-HB2016-MOPR017
[n] K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514.
[n] R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
[n] P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
[n] M. P. Stockli et al., “Highly-Persistent SNS H- Source Fueling 1-MW Beams with 7-9 kC Service Cycles”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP275, pp. 1993-1995.
[n] L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
[n] B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
[n] J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
[n] J. H. Wang et al., “Experiment of Transverse Feedback System at HLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP082, pp. 4147-4149.
[n] F. Liu, I. Brown, L. Phillips, G. Biallas, and T. Siggins, “A Method of Producing Surface Conduction on Ceramic Accelerator Components Using Metal Ion Implantation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P064, pp. 3752-3754.
[n] S. A. Bogacz, A. Latina, D. Schulte, and D. Pellegrini, “LHeC ERL Design and Beam-Dynamics Issues”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 15-19. doi:10.18429/JACoW-ERL2015-TUIBLH2026
[n] K. R. Crandall, R. H. Stokes, T. P. Wangler, and M. Pabst, “Octupole Focusing in Transport and Acceleration Systems”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B01, pp. 31-35.
[n] J. Wu et al., “X-ray Spectra and Peak Power Control with iSASE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB101, pp. 2068-2070.
[n] A. Loulergue, M.-E. Couprie, M. Khojoyan, M. Labat, W. Wang, and C. Evain, “Electron Beam Transfer Line for Demonstration of Laser Plasma Based Free Electron Laser Amplification”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2489-2491. doi:10.18429/JACoW-IPAC2015-WEPWA001
[n] C. H. Li et al., “Design and Progress on Mechanical & Alignment System for HEPS-TF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4544-4547. doi:10.18429/JACoW-IPAC2017-THPVA048
[n] M. Shibata, T. Ishii, S. Kanazawa, Y. Sugiyama, S. Takeuchi, and T. Yoshida, “RF Performances of Superconducting Resonators for the JAERI Tandem Booster”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I35, pp. XX-XX.
[n] C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
[n] J. Castellanos et al., “Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 840-842. doi:10.18429/JACoW-LINAC2016-THPRC031
[n] D. Arenius, “Cryogenic Plants for SRF Linacs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOB01, pp. 811-813.
[n] J. M. Mosthaf, S. Hanke, A. Peters, and S. Stumpf, “Using Wordpress as a Simple and Reliable Electronic Logbook for the Heidelberg Ion-Beam Therapy Centre (HIT) Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP111, pp. 892-894.
For LaTeX
Use Complete Form
For BibTeX
References
- G. D'Auria et al., “The X-band System for the FERMI@ELETTRA FEL Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE015, pp. 2173-2175.
- G. Penacoba Fernandez et al., “Design of an FPGA-based Radiation Tolerant Agent for WorldFIP Fieldbus”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS102, pp. 1780-1782.
- T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449.
- R. Gorbonosov, V. Baggiolini, G. Kruk, and M. Zerlauth, “Plug-in Based Analysis Framework for LHC Post-Mortem Analysis”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC143, pp. 446-448.
- U. Scheeler et al., “Recommissioning of the Marburg Ion-beam Therapy Centre (MIT) Accelerator Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1908-1910.
- R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
- W. Kutschera, “Accelerator Mass Spectrometry at VERA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEYF101, pp. 245-252.
- D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
- E. Van der Bij et al., “Open Hardware for CERN's Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUBAULT04, pp. 554-557.
- F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
- R. Tomas, S. D. Fartoukh, and J. Serrano, “Reliable Operation of the AC Dipole in the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP026, pp. 2575-2577.
- D. Regidor et al., “IFMIF-EVEDA SRF Linac Couplers Test Bench”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO043, pp. 2396-2398.
- B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 524-527.
- M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
- R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1123-1126.
- K. R. Crandall, R. H. Stokes, and T. P. Wangler, “RF Quadrupole Beam Dynamics Design Studies”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S4-1, pp. 205-216.
- Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3891-3894.
- K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
- O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
- M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
- K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1568-1570.
- E. S. Fischer, A. Bleile, V. I. Datskov, V. Marusov, J. P. Meier, and P. J. Spiller, “Start of the Series Production for the Cryogenic Magnet Corrector Modules of FAIR”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4124-4127.
- S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747.
- S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
- J. Serrano, “Digital Signal Processing Using Field Programmable Gate Arrays”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper THTTT01, pp. 346-355.
- J. K. Sekutowicz, W. C. Grabowski, R. Nietubyc, and T. Wasiewicz, “Shape Optimization of a SRF Injector Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO007, pp. 2322-2324.
- S. S. Kurennoy, L. Rybarcyk, and T. P. Wangler, “An H-Mode Accelerator with PMQ Focusing as a LANSCE DTL Replacement”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS067, pp. 2655-2657.
- D. J. Newsham, S. A. Bogacz, Y.-C. Chao, Y. S. Derbenev, R. P. Johnson, and R. Sah, “Simulations of Parametric-resonance Ionization Cooling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN094, pp. 2927-2929.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596.
- A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
- C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2419-2421.
- J.-P. Delahaye et al., “A Staged Muon-based Facility to Enable Intensity and Energy Frontier Science in the US”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA20, pp. 565-567.
- A. Y. Murokh et al., “Inverse Compton Scattering Experiment in a Bunch Train Regime Using Nonlinear Optical Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB008, pp. 3245-3247.
- P. A. Elkiaer et al., “Slow Kicker Magnet System with Energy Recover Pulse Power Supply with Extended Flat Top”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN004, pp. 1395-1397.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107.
- S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1036-1038.
- K. Beard, L. Merminga, and B. Yunn, “Tools to Predict Beam Breakup in Recirculating Linacs”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPD006, pp. 332-334.
- Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
- M. G. Mazarakis et al., “Acceleration, Ion Focusing (IFR) and Transport Experiments with Recirculating Linear Accelerator (RLA)”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-03, pp. 299-301.
- S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1731-1733.
- S. A. Bogacz, K. B. Beard, and R. P. Johnson, “Recirculating Linear Accelerators for Future Muon Facilities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH01, pp. 3602-3604.
- P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115.
- Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
- S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122.
- O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1556-1559.
- L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 789-793.
- T. P. Wangler, “Lumped-Circuit Model of Four-Vane RFQ Resonator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0005, pp. 332-334.
- T. P. Wangler, F. W. Guy, and I. Hofmann, “The Influence of Equipartitioning on the Emittance of Intense Charged-Particle Beams”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-36, pp. 340-345.
- H. Bluem et al., “Electron Gun and Injector Designs for State-of-the-Art FELs”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP054, pp. XX-XX.
- S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
- E. S. Fischer et al., “From Design Towards Series - The Superconducting Magnets for FAIR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1167-1170.
- W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3901-3904.
- A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
- J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1151-1153.
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 596-599.
- P. Chitnis, T. G. Robertazzi, K. A. Brown, and C. Theisen, “Quantitative Fault Tree Analysis of the Beam Permit System Elements of Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC076, pp. 269-272.
- S. A. Bogacz, “PERLE - Beam Optics Design”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 49-51.
- S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 540-542.
- T. Hughes and H. Davis, “Effect of Stimulated and Thermal Desorption in DARHT-2”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAA006, pp. 120-122.
- F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
- L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
- Y. S. Derbenev et al., “Achromatic Interaction Point Design”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP064, pp. 2649-2651.
- M. Schedler, F. Frommberger, N. Heurich, W. Hillert, A. Roth, and R. Zimmermann, “First Measurements with Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP059, pp. 2840-2842.
- K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 765-769.
- W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
- J. L. Sun et al., “Status of the Beam Instrumentation System of CSNS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 95-97.
- K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514.
- R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
- P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
- M. P. Stockli et al., “Highly-Persistent SNS H- Source Fueling 1-MW Beams with 7-9 kC Service Cycles”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP275, pp. 1993-1995.
- L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
- B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
- J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
- J. H. Wang et al., “Experiment of Transverse Feedback System at HLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP082, pp. 4147-4149.
- F. Liu, I. Brown, L. Phillips, G. Biallas, and T. Siggins, “A Method of Producing Surface Conduction on Ceramic Accelerator Components Using Metal Ion Implantation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P064, pp. 3752-3754.
- S. A. Bogacz, A. Latina, D. Schulte, and D. Pellegrini, “LHeC ERL Design and Beam-Dynamics Issues”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 15-19.
- K. R. Crandall, R. H. Stokes, T. P. Wangler, and M. Pabst, “Octupole Focusing in Transport and Acceleration Systems”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B01, pp. 31-35.
- J. Wu et al., “X-ray Spectra and Peak Power Control with iSASE”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEODB101, pp. 2068-2070.
- A. Loulergue, M.-E. Couprie, M. Khojoyan, M. Labat, W. Wang, and C. Evain, “Electron Beam Transfer Line for Demonstration of Laser Plasma Based Free Electron Laser Amplification”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2489-2491.
- C. H. Li et al., “Design and Progress on Mechanical & Alignment System for HEPS-TF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4544-4547.
- M. Shibata, T. Ishii, S. Kanazawa, Y. Sugiyama, S. Takeuchi, and T. Yoshida, “RF Performances of Superconducting Resonators for the JAERI Tandem Booster”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I35, pp. XX-XX.
- C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
- J. Castellanos et al., “Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 840-842.
- D. Arenius, “Cryogenic Plants for SRF Linacs”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THIOB01, pp. 811-813.
- J. M. Mosthaf, S. Hanke, A. Peters, and S. Stumpf, “Using Wordpress as a Simple and Reliable Electronic Logbook for the Heidelberg Ion-Beam Therapy Centre (HIT) Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP111, pp. 892-894.
Back to search