Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
[n] S. Rowan et al., “Qualification of the Bypass Continuity of the Main Dipole Magnet Circuits of the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3141-3144. doi:10.18429/JACoW-IPAC2015-WEPHA017
[n] A. Lechner et al., “Power Deposition in LHC Magnets With and Without Dispersion Suppressor Collimators Downstream of the Betatron Cleaning Insertion”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 112-115. doi:10.18429/JACoW-IPAC2014-MOPRO021
[n] H. Damerau, A. Findlay, S. S. Gilardoni, and S. Hancock, “RF Manipulations for Higher Brightness LHC-type Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA044, pp. 2600-2602.
[n] Y. G. Alenitsky et al., “The High Current Cylotron Complex for an Electronuclear Way of Production of Energy”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-4, pp. XX-XX.
[n] J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352.
[n] C. Y. Yoshikawa, R. J. Abrams, A. Afanasev, C. M. Ankenbrandt, K. B. Beard, and D. V. Neuffer, “Positron Production for a Compact Tunable Intense Gamma Ray Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA045, pp. 175-177.
[n] S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
[n] E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
[n] C. Carli et al., “Studies on Single Batch Transfer of LHC Type Beams between the CERN PS Booster and the PS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP035, pp. 3778-3780.
[n] J. L. Kirchgessner, “Forming and Welding of Niobium for Superconducting Cavities”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E05, pp. XX-XX.
[n] R. B. Palmer, “Design of Superconducting Magnets for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 32-37.
[n] D. Barna, W. Bartmann, J. Borburgh, C. Carli, and G. Vanbavinckhove, “Field Simulations and Mechanical Implementation of Electrostatic Elements for the ELENA Transfer Lines”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 855-857. doi:10.18429/JACoW-IPAC2014-MOPRI101
[n] A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and F. Zimmermann, “Studies of Current Dependent Effects at ANKA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT070, pp. 2011-2013.
[n] H. Dewa et al., “Laser Driven RF Signal Generation with an Amplitude Stabilization Technique”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC76, pp. 678-681.
[n] I. Moya et al., “Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC174, pp. 3308-3310.
[n] M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
[n] V. Grishin et al., “The First Experience and Results of Beam Diagnostics Deployment at the ESS Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2054-2057. doi:10.18429/JACoW-IPAC2018-WEPAF087
For LaTeX
Use Complete Form
For BibTeX
References
- S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
- S. Rowan et al., “Qualification of the Bypass Continuity of the Main Dipole Magnet Circuits of the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3141-3144.
- A. Lechner et al., “Power Deposition in LHC Magnets With and Without Dispersion Suppressor Collimators Downstream of the Betatron Cleaning Insertion”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 112-115.
- H. Damerau, A. Findlay, S. S. Gilardoni, and S. Hancock, “RF Manipulations for Higher Brightness LHC-type Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA044, pp. 2600-2602.
- Y. G. Alenitsky et al., “The High Current Cylotron Complex for an Electronuclear Way of Production of Energy”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper L-4, pp. XX-XX.
- J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352.
- C. Y. Yoshikawa, R. J. Abrams, A. Afanasev, C. M. Ankenbrandt, K. B. Beard, and D. V. Neuffer, “Positron Production for a Compact Tunable Intense Gamma Ray Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA045, pp. 175-177.
- S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
- E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
- C. Carli et al., “Studies on Single Batch Transfer of LHC Type Beams between the CERN PS Booster and the PS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP035, pp. 3778-3780.
- J. L. Kirchgessner, “Forming and Welding of Niobium for Superconducting Cavities”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E05, pp. XX-XX.
- R. B. Palmer, “Design of Superconducting Magnets for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 32-37.
- D. Barna, W. Bartmann, J. Borburgh, C. Carli, and G. Vanbavinckhove, “Field Simulations and Mechanical Implementation of Electrostatic Elements for the ELENA Transfer Lines”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 855-857.
- A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and F. Zimmermann, “Studies of Current Dependent Effects at ANKA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT070, pp. 2011-2013.
- H. Dewa et al., “Laser Driven RF Signal Generation with an Amplitude Stabilization Technique”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC76, pp. 678-681.
- I. Moya et al., “Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC174, pp. 3308-3310.
- M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
- V. Grishin et al., “The First Experience and Results of Beam Diagnostics Deployment at the ESS Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2054-2057.
Back to search