Favourites
For Word
[n] N. Solyak et al., “Design and Test Results of the 3.9 GHz Cavity for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2730-2733. doi:10.18429/JACoW-IPAC2018-WEPML023
[n] R. Bartolini, H. C. Huang, J. Kay, and I. P. S. Martin, “Analysis of Beam Orbit Stability and Ground Vibrations at the Diamond Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC002, pp. 1980-1982.
[n] A. Uchiyama, N. Fukunishi, and M. Komiyama, “Implementation of Web-based Operational Log System at RIBF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1073-1077. doi:10.18429/JACoW-ICALEPCS2017-THAPL01
[n] N. Yamamoto, A. Gamelin, and R. Nagaoka, “Investigation of Longitudinal Beam Dynamics With Harmonic Cavities by Using the Code Mbtrack”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 178-180. doi:10.18429/JACoW-IPAC2019-MOPGW039
[n] B. Lindstrom et al., “Machine Protection Experience from Beam Tests with Crab Cavity Prototypes in the CERN SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 520-523. doi:10.18429/JACoW-IPAC2019-MOPMP036
[n] T. Sakurai, T. Inagaki, Y. Otake, and H. Ego, “Design of a C-band Disk-loaded Type Accelerating Structure for a Higher Pulse Repetition Rate in the SACLA Accelerator.”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB084, pp. 372-374.
[n] P. Sha et al., “Pre-study of CEPC SRF Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 476-479. doi:10.18429/JACoW-LINAC2018-TUPO064
[n] T. Sugimoto, M. I. Ishii, T. Ohata, T. Sakamoto, and R. Tanaka, “Upgrade Of The Spring-8 Control Network For Integration Of Xfel”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WED006, pp. 627-629.
[n] B. Lorbeer, F. Loehl, F. Ludwig, J. M. Mueller, H. Schlarb, and A. Winter, “Noise and drift characterization of critical components for the laser based synchronization system at FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB08, pp. 250-252.
[n] T. M. Huang et al., “The Window Replacement and Q Recovery of BEPCII Storage Ring SCC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1046-1048. doi:10.18429/JACoW-IPAC2017-MOPVA078
[n] T. Tanaka et al., “SASE Saturation at the SCSS Test Accelerator Ranging from 50 nm to 60 nm”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper FRAAU02, pp. 537-542.
[n] H. Okuno et al., “A New Possibility of Low-Z Gas Stripper for High-Power Uranium Beam Acceleration Alternative to C Foil”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B01, pp. 600-604.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Solyak et al., “Design and Test Results of the 3.9 GHz Cavity for LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2730-2733.
- R. Bartolini, H. C. Huang, J. Kay, and I. P. S. Martin, “Analysis of Beam Orbit Stability and Ground Vibrations at the Diamond Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC002, pp. 1980-1982.
- A. Uchiyama, N. Fukunishi, and M. Komiyama, “Implementation of Web-based Operational Log System at RIBF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1073-1077.
- N. Yamamoto, A. Gamelin, and R. Nagaoka, “Investigation of Longitudinal Beam Dynamics With Harmonic Cavities by Using the Code Mbtrack”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 178-180.
- B. Lindstrom et al., “Machine Protection Experience from Beam Tests with Crab Cavity Prototypes in the CERN SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 520-523.
- T. Sakurai, T. Inagaki, Y. Otake, and H. Ego, “Design of a C-band Disk-loaded Type Accelerating Structure for a Higher Pulse Repetition Rate in the SACLA Accelerator.”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB084, pp. 372-374.
- P. Sha et al., “Pre-study of CEPC SRF Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 476-479.
- T. Sugimoto, M. I. Ishii, T. Ohata, T. Sakamoto, and R. Tanaka, “Upgrade Of The Spring-8 Control Network For Integration Of Xfel”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WED006, pp. 627-629.
- B. Lorbeer, F. Loehl, F. Ludwig, J. M. Mueller, H. Schlarb, and A. Winter, “Noise and drift characterization of critical components for the laser based synchronization system at FLASH”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB08, pp. 250-252.
- T. M. Huang et al., “The Window Replacement and Q Recovery of BEPCII Storage Ring SCC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1046-1048.
- T. Tanaka et al., “SASE Saturation at the SCSS Test Accelerator Ranging from 50 nm to 60 nm”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper FRAAU02, pp. 537-542.
- H. Okuno et al., “A New Possibility of Low-Z Gas Stripper for High-Power Uranium Beam Acceleration Alternative to C Foil”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B01, pp. 600-604.
Back to search