Favourites
For Word
[n] T. P. Hughes, R. E. Clark, and S. S. Yu, “3-D Calculations for a 4 kA, 3.5 MV, 2.5 Microsecond Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA59, pp. 2746-2748.
[n] W. Leemans, “Brief Report of the First Workshop of the Joint ICFA-ICUIL Taskforce on High Average Power Lasers for Future Accelerators”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOIC03, pp. 43-44.
[n] J. L. Kirchgessner, “Titanium Vacuum Chamber Liners in the Cornell Electron Synchrotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 131-133.
[n] M. Popovic, C. M. Ankenbrandt, M. A. C. Cummings, R. P. Johnson, A. Moretti, and M. L. Neubauer, “Dielectric Loaded RF Cavities for Muon Facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA047, pp. 3783-3785.
[n] Y. Funahashi et al., “Development of Active Tables for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-50, pp. 816-818.
[n] I. V. Konoplev, A. J. Lancaster, K. Metodiev, A. Seryi, R. Ainsworth, and G. Burt, “Experimental Studies of Asymmetric Dual Axis Cavity for Energy Recovery LINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1105-1107. doi:10.18429/JACoW-IPAC2017-MOPVA106
[n] Ya. S. Derbenev et al., “The Status of Electron Cooling at Novosibirsk (Theory and Experiment)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2672-2677.
[n] G. P. Di Giovanni et al., “Commissioning of a New Digital Transverse Damper System at the PSB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1050-1053. doi:10.18429/JACoW-IPAC2019-MOPTS085
[n] A. P. Letchford, D. J. S. Findlay, and J. P. Duke, “Measurements of RF Cavity Voltages by X-Ray Spectrum Measurements”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC08, pp. 164-165.
[n] A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and R. Rossmanith, “Energy Calibration of the ANKA Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF022, pp. 2311-2313.
[n] O. K. Anisimov et al., “Status of Cyclotron Facility in Alma-Ata”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-07, pp. 1912-1914.
[n] A. M. Semenov et al., “NSLS-II Booster Vacuum System”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC11, pp. 342-344.
[n] M. M. Paoluzzi, “A Fast 650V Chopper Driver”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS101, pp. 1777-1779.
[n] T. J. Shea et al., “Proton Beam Measurement Strategy for the 5 MW European Spallation Source Target”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC02, pp. 349-352.
[n] D. J. S. Findlay et al., “RF-Tuning of the ISIS-RFQ”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B01, pp. 869-871.
[n] W. Leemans, “20 years since the first laser plasma accelerated dream beams and a look forward”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper FRXN2, unpublished.
[n] C. Wyss, “The LHC Magnet Programme: from Accelerator Physics Requirements to Production in Industry”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOZE01, pp. 207-211.
[n] R. Bachelard et al., “Radiation from a Laser-Plasma Accelerated Electron Beam Passing Through an Undulator”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC50, pp. 138-141.
[n] R. M. Zwaska, S. E. Kopp, W. Pellico, and R. C. Webber, “Synchronization of the Fermilab Booster and Main Injector for Multiple Batch Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT130, pp. 2771-2773.
[n] A. Goto, N. Nakanishi, and Y. Yano, “Computer Simulations of Accelerated Particles in the RIKEN SSC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B05, pp. 36-39.
[n] M. Otani et al., “Muon Profile Measurement After Acceleration With a Radio-Frequency Quadrupole Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 977-980. doi:10.18429/JACoW-IPAC2018-TUPAK009
[n] T. A. Mohayai, D. V. Neuffer, P. Snopok, and C. T. Rogers, “Simulated Measurements of Beam Cooling in Muon Ionization Cooling Experiment”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 771-774. doi:10.18429/JACoW-NAPAC2016-WEPOA36
For LaTeX
Use Complete Form
For BibTeX
References
- T. P. Hughes, R. E. Clark, and S. S. Yu, “3-D Calculations for a 4 kA, 3.5 MV, 2.5 Microsecond Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA59, pp. 2746-2748.
- W. Leemans, “Brief Report of the First Workshop of the Joint ICFA-ICUIL Taskforce on High Average Power Lasers for Future Accelerators”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOIC03, pp. 43-44.
- J. L. Kirchgessner, “Titanium Vacuum Chamber Liners in the Cornell Electron Synchrotron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 131-133.
- M. Popovic, C. M. Ankenbrandt, M. A. C. Cummings, R. P. Johnson, A. Moretti, and M. L. Neubauer, “Dielectric Loaded RF Cavities for Muon Facilities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA047, pp. 3783-3785.
- Y. Funahashi et al., “Development of Active Tables for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-50, pp. 816-818.
- I. V. Konoplev, A. J. Lancaster, K. Metodiev, A. Seryi, R. Ainsworth, and G. Burt, “Experimental Studies of Asymmetric Dual Axis Cavity for Energy Recovery LINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1105-1107.
- Ya. S. Derbenev et al., “The Status of Electron Cooling at Novosibirsk (Theory and Experiment)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2672-2677.
- G. P. Di Giovanni et al., “Commissioning of a New Digital Transverse Damper System at the PSB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1050-1053.
- A. P. Letchford, D. J. S. Findlay, and J. P. Duke, “Measurements of RF Cavity Voltages by X-Ray Spectrum Measurements”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC08, pp. 164-165.
- A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and R. Rossmanith, “Energy Calibration of the ANKA Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF022, pp. 2311-2313.
- O. K. Anisimov et al., “Status of Cyclotron Facility in Alma-Ata”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-07, pp. 1912-1914.
- A. M. Semenov et al., “NSLS-II Booster Vacuum System”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC11, pp. 342-344.
- M. M. Paoluzzi, “A Fast 650V Chopper Driver”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS101, pp. 1777-1779.
- T. J. Shea et al., “Proton Beam Measurement Strategy for the 5 MW European Spallation Source Target”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC02, pp. 349-352.
- D. J. S. Findlay et al., “RF-Tuning of the ISIS-RFQ”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B01, pp. 869-871.
- W. Leemans, “20 years since the first laser plasma accelerated dream beams and a look forward”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper FRXN2, unpublished.
- C. Wyss, “The LHC Magnet Programme: from Accelerator Physics Requirements to Production in Industry”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOZE01, pp. 207-211.
- R. Bachelard et al., “Radiation from a Laser-Plasma Accelerated Electron Beam Passing Through an Undulator”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC50, pp. 138-141.
- R. M. Zwaska, S. E. Kopp, W. Pellico, and R. C. Webber, “Synchronization of the Fermilab Booster and Main Injector for Multiple Batch Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT130, pp. 2771-2773.
- A. Goto, N. Nakanishi, and Y. Yano, “Computer Simulations of Accelerated Particles in the RIKEN SSC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B05, pp. 36-39.
- M. Otani et al., “Muon Profile Measurement After Acceleration With a Radio-Frequency Quadrupole Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 977-980.
- T. A. Mohayai, D. V. Neuffer, P. Snopok, and C. T. Rogers, “Simulated Measurements of Beam Cooling in Muon Ionization Cooling Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 771-774.
Back to search