Favourites
For Word
[n] A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
[n] S. Eckhouse, E. Chu, and M. Montgomery, “Scaling Laws and Optimization of Electron Linear Induction Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 911-914.
[n] S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335.
[n] Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608.
[n] Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3299-3301. doi:10.18429/JACoW-IPAC2016-THPMB032
[n] J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n] K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
[n] V. Variale et al., “First Test of the Charge State Breeder BRIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB013, pp. 3318-3320.
[n] H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2165-2168.
[n] J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n] L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471.
[n] M. Khojoyan et al., “Beam Dynamics Studies for Particle Driven Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THP08, pp. 236-238.
[n] A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
- S. Eckhouse, E. Chu, and M. Montgomery, “Scaling Laws and Optimization of Electron Linear Induction Accelerators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 911-914.
- S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335.
- Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608.
- Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3299-3301.
- J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 152-155.
- K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
- V. Variale et al., “First Test of the Charge State Breeder BRIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB013, pp. 3318-3320.
- H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2165-2168.
- J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1288-1290.
- L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471.
- M. Khojoyan et al., “Beam Dynamics Studies for Particle Driven Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper THP08, pp. 236-238.
- A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
Back to search