Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Saban, “Integrating Industrial and Accelerator Control Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE01, pp. 2147-2151.
[n] H. Delsim-Hashemi et al., “Single-Shot Longitudinal Diagnostics with THz Radiation at the Free-Electron Laser FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH018, pp. 594-596.
[n] S. Seletskiy, M. Blaskiewicz, A. V. Fedotov, D. Kayran, and J. Kewisch, “Effect of Beam-Beam Kick on Electron Beam Quality in First Bunched Electron Cooler”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3297-3300. doi:10.18429/JACoW-IPAC2019-WEPTS075
[n] M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276.
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] D. B. Hopkins et al., “Design and Fabrication of 33 GHz High-Gradient Accelerator Sections”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1157-1160.
[n] J. Z. Xu et al., “Linac Coherent Light Source (LCLS) Undulator Line Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP091, pp. 290-292.
[n] T. Gromme et al., “Slow Feedback Systems for PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A15, pp. 1897-1899.
[n] D. Liska, J. Billen, L. Dauelsberg, H. Mignardot, and G. Zimmerman, “A High-Intensity Drift-Tube Linac with Ramped Accelerating Gradient”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-52, pp. 652-655.
[n] S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893.
[n] A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1007-1011. doi:10.18429/JACoW-ICALEPCS2017-TUSH303
[n] J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
[n] R. B. Agustsson et al., “An Overview of Normal Conducting Radio Frequency Projects and Manufacturing Capabilities at Radiabeam Technologies, LLC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP051, pp. 2214-2216.
[n] S. Henderson et al., “The Commissioning Plan for the Spallation Neutron Source Ring and Transport Lines”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE011, pp. 1569-1571.
[n] J. Santander-Vela, L. Pivetta, and N. P. Rees, “Status of the Square Kilometre Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1982-1988. doi:10.18429/JACoW-ICALEPCS2017-FRAPL01
[n] R. S. Livingston, “Session IV Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181.
[n] C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757.
[n] T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n] R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
[n] A. Luedeke, “Cognitive Ergonomics of Operational Tools”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUIO06, pp. 1196-1200.
[n] B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n] A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020.
[n] I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212.
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] M. Kreider, W. W. Terpstra, J. H. Lewis, J. Serrano, and T. Wlostowski, “EtherBone - A Network Layer for the Wishbone SoC Bus”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHMULT03, pp. 642-645.
[n] P. Golonka, M. Gonzalez-Berges, J. Guzik, and R. Kulaga, “Future Archiver for CERN SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1442-1445. doi:10.18429/JACoW-ICALEPCS2017-THPHA037
[n] F. Toral et al., “Design, Manufacturing and Tests of a Micrometer Precision Mover for CTF3 Quadrupoles”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD040, pp. 1517-1519.
[n] G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 598-601.
[n] V. Alferov et al., “LabView Control System of the Cryogenic Complex for the Kaon RF-Separator at IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB038, pp. 257-259.
[n] A. Luedeke, “The Operation Event Logging System of the SLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC142, pp. 3318-3320.
[n] X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 162-164. doi:10.18429/JACoW-MEDSI2016-TUPE05
[n] G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1353-1356.
[n] J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT22, pp. XX-XX.
[n] U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 847-849. doi:10.18429/JACoW-IPAC2015-MOPHA030
[n] M. M. Lipinski, J. Serrano, T. Wlostowski, and C. Prados, “Reliability in a White Rabbit Network”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU007, pp. 698-701.
[n] A. P. Zhukov and I. Nesterenko, “Measurement and Detailed Simulation of Beam Losses Caused by Thin Interception Devices (Wire Scanners, Scrapers) at SNS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP013, pp. 3977-3978.
[n] K. W. Shepard, “A Low-Frequency RFQ for a Low-Charge-State Injector for ATLAS”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP09, pp. 68-70.
[n] L. Perrot, M. Kemel, and S. Rousselot, “Benchmark Analyses of Electrostatic Devices for SPIRAL2-DESIR Beam Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3225-3227. doi:10.18429/JACoW-IPAC2018-THPAK009
[n] N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268.
[n] A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2490-2494. doi:10.18429/JACoW-IPAC2017-WEOCA1
[n] P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488.
[n] B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845.
[n] Y. Goren and D. U. L. Yu, “Computer-Aided Design of Three-Dimensional Waveguide Loaded Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 189-193.
[n] G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 846-848. doi:10.18429/JACoW-ICALEPCS2017-TUPHA179
[n] H. Higaki et al., “A Tank Circuit Monitoring a Large Number of Antiprotons in MUSASHI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE001, pp. 948-950.
[n] J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
[n] M. T. Lynch et al., “Linac Design Study for an Intense Neutron-Source Driver”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1683-1686.
[n] A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-IBIC2016-WEPG78
[n] L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043.
[n] G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2085-2088. doi:10.18429/JACoW-IPAC2017-TUPVA019
[n] D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
[n] W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890.
[n] Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_002.
[n] C. Yao, N. P. Di Monte, and W. E. Norum, “An FPGA-Based Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN116, pp. 440-442.
[n] M. Ritzert, “A Database to Store EPICS Configuration Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 745-747. doi:10.18429/JACoW-ICALEPCS2017-TUPHA143
[n] D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278.
[n] C. O. Domínguez and F. Zimmermann, “Luminosity Optimization for a Higher-Energy LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ014, pp. 1831-1833.
[n] K. W. Shepard, “A Superconducting Heavy Ion Injector Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3574-3578.
[n] P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348.
[n] A. M. Marendziak et al., “Performance of the Vacuum System for the Solaris 1.5 GeV Electron Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2898-2901. doi:10.18429/JACoW-IPAC2016-WEPOW031
[n] D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX.
[n] J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2902-2904. doi:10.18429/JACoW-IPAC2016-WEPOW032
[n] J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] K. R. Kim et al., “Utilization of Cr2O3 Passivation Process on Stainless-Steel Chamber for XHV Environment”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99910, pp. XX-XX.
[n] R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication and Validation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP050, pp. 2211-2213.
[n] L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
[n] F. Follin, R. Alemany-Fernandez, and R. Jacobsson, “Online Luminosity Optimization at the LHC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC123, pp. 1351-1354.
[n] P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
[n] Q. Zhao et al., “Design of the Bunch Length Measurement for the Photo Injector Test Facility at DESY Zeuthen”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH089, pp. 2299-2301.
[n] W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
[n] R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
[n] J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 118-123.
[n] R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
[n] A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
[n] S. Wagner, R. Schmidt, B. Todd, J. A. Uythoven, and M. Zerlauth, “A Failure Catalogue for the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC174, pp. 2394-2396.
[n] L. Z. Zembala et al., “Master Oscillator for the European XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2771-2773. doi:10.18429/JACoW-IPAC2014-WEPRI116
[n] M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
[n] K. W. Shepard, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Superconducting Intermediate-Velocity Cavity Development for RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB045, pp. 1297-1299.
[n] V. L. Brook, N. G. Mamuchashvili, I. G. Morozov, S. V. Shekhvatov, I. N. Tereschenko, and V. G. Tishin, “Monitoring the Conditions of Beam Injection into the IHEP Accelerator from the Booster”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1597-1599.
[n] N. Solyak et al., “Development of X-Band Accelerating Structures at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB013, pp. 1210-1212.
[n] R. Gorbonosov, V. Baggiolini, G. Kruk, and M. Zerlauth, “Plug-in Based Analysis Framework for LHC Post-Mortem Analysis”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC143, pp. 446-448.
[n] M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Saban, “Integrating Industrial and Accelerator Control Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE01, pp. 2147-2151.
- H. Delsim-Hashemi et al., “Single-Shot Longitudinal Diagnostics with THz Radiation at the Free-Electron Laser FLASH”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH018, pp. 594-596.
- S. Seletskiy, M. Blaskiewicz, A. V. Fedotov, D. Kayran, and J. Kewisch, “Effect of Beam-Beam Kick on Electron Beam Quality in First Bunched Electron Cooler”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3297-3300.
- M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- D. B. Hopkins et al., “Design and Fabrication of 33 GHz High-Gradient Accelerator Sections”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1157-1160.
- J. Z. Xu et al., “Linac Coherent Light Source (LCLS) Undulator Line Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP091, pp. 290-292.
- T. Gromme et al., “Slow Feedback Systems for PEP-II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A15, pp. 1897-1899.
- D. Liska, J. Billen, L. Dauelsberg, H. Mignardot, and G. Zimmerman, “A High-Intensity Drift-Tube Linac with Ramped Accelerating Gradient”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-52, pp. 652-655.
- S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893.
- A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1007-1011.
- J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
- R. B. Agustsson et al., “An Overview of Normal Conducting Radio Frequency Projects and Manufacturing Capabilities at Radiabeam Technologies, LLC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP051, pp. 2214-2216.
- S. Henderson et al., “The Commissioning Plan for the Spallation Neutron Source Ring and Transport Lines”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE011, pp. 1569-1571.
- J. Santander-Vela, L. Pivetta, and N. P. Rees, “Status of the Square Kilometre Array”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1982-1988.
- R. S. Livingston, “Session IV Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181.
- C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757.
- T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1073-1078.
- R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
- A. Luedeke, “Cognitive Ergonomics of Operational Tools”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THBHAUIO06, pp. 1196-1200.
- B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA001, pp. 1350-1353.
- A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_020.
- I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- M. Kreider, W. W. Terpstra, J. H. Lewis, J. Serrano, and T. Wlostowski, “EtherBone - A Network Layer for the Wishbone SoC Bus”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEBHMULT03, pp. 642-645.
- P. Golonka, M. Gonzalez-Berges, J. Guzik, and R. Kulaga, “Future Archiver for CERN SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1442-1445.
- F. Toral et al., “Design, Manufacturing and Tests of a Micrometer Precision Mover for CTF3 Quadrupoles”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD040, pp. 1517-1519.
- G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 598-601.
- V. Alferov et al., “LabView Control System of the Cryogenic Complex for the Kaon RF-Separator at IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB038, pp. 257-259.
- A. Luedeke, “The Operation Event Logging System of the SLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC142, pp. 3318-3320.
- X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 162-164.
- G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1353-1356.
- J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT22, pp. XX-XX.
- U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 847-849.
- M. M. Lipinski, J. Serrano, T. Wlostowski, and C. Prados, “Reliability in a White Rabbit Network”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU007, pp. 698-701.
- A. P. Zhukov and I. Nesterenko, “Measurement and Detailed Simulation of Beam Losses Caused by Thin Interception Devices (Wire Scanners, Scrapers) at SNS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP013, pp. 3977-3978.
- K. W. Shepard, “A Low-Frequency RFQ for a Low-Charge-State Injector for ATLAS”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP09, pp. 68-70.
- L. Perrot, M. Kemel, and S. Rousselot, “Benchmark Analyses of Electrostatic Devices for SPIRAL2-DESIR Beam Lines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3225-3227.
- N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268.
- A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2490-2494.
- P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488.
- B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845.
- Y. Goren and D. U. L. Yu, “Computer-Aided Design of Three-Dimensional Waveguide Loaded Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 189-193.
- G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 846-848.
- H. Higaki et al., “A Tank Circuit Monitoring a Large Number of Antiprotons in MUSASHI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE001, pp. 948-950.
- J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
- M. T. Lynch et al., “Linac Design Study for an Intense Neutron-Source Driver”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1683-1686.
- A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 836-839.
- L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043.
- G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2085-2088.
- D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
- W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1887-1890.
- Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_002.
- C. Yao, N. P. Di Monte, and W. E. Norum, “An FPGA-Based Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN116, pp. 440-442.
- M. Ritzert, “A Database to Store EPICS Configuration Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 745-747.
- D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278.
- C. O. Domínguez and F. Zimmermann, “Luminosity Optimization for a Higher-Energy LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ014, pp. 1831-1833.
- K. W. Shepard, “A Superconducting Heavy Ion Injector Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3574-3578.
- P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348.
- A. M. Marendziak et al., “Performance of the Vacuum System for the Solaris 1.5 GeV Electron Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2898-2901.
- D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX.
- J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2902-2904.
- J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- K. R. Kim et al., “Utilization of Cr2O3 Passivation Process on Stainless-Steel Chamber for XHV Environment”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99910, pp. XX-XX.
- R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication and Validation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP050, pp. 2211-2213.
- L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
- F. Follin, R. Alemany-Fernandez, and R. Jacobsson, “Online Luminosity Optimization at the LHC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC123, pp. 1351-1354.
- P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
- Q. Zhao et al., “Design of the Bunch Length Measurement for the Photo Injector Test Facility at DESY Zeuthen”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH089, pp. 2299-2301.
- W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
- R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
- J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 118-123.
- R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
- A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
- S. Wagner, R. Schmidt, B. Todd, J. A. Uythoven, and M. Zerlauth, “A Failure Catalogue for the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC174, pp. 2394-2396.
- L. Z. Zembala et al., “Master Oscillator for the European XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2771-2773.
- M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
- K. W. Shepard, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Superconducting Intermediate-Velocity Cavity Development for RIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB045, pp. 1297-1299.
- V. L. Brook, N. G. Mamuchashvili, I. G. Morozov, S. V. Shekhvatov, I. N. Tereschenko, and V. G. Tishin, “Monitoring the Conditions of Beam Injection into the IHEP Accelerator from the Booster”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1597-1599.
- N. Solyak et al., “Development of X-Band Accelerating Structures at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB013, pp. 1210-1212.
- R. Gorbonosov, V. Baggiolini, G. Kruk, and M. Zerlauth, “Plug-in Based Analysis Framework for LHC Post-Mortem Analysis”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC143, pp. 446-448.
- M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
Back to search