Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. K. Yang et al., “Status of Beam Diagnostics at KHIMA Facility”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 126-130. doi:10.18429/JACoW-IBIC2015-MOPB038
[n] I. Sugai et al., “Realization of Thick Hybrid Type Carbon Stripper Foils with High Durability at 1800K for RCS of J-PARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS108, pp. 1753-1755.
[n] A. Y. Molodozhentsev, A. Ando, T. Koseki, M. J. Shirakata, J. Takano, and M. Tomizawa, “Study of the Beam Dynamics for the 'Fast Extraction' Operating Scenario of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD009, pp. 1937-1939.
[n] C. Bieth et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 431-434.
[n] M. Labat et al., “Operation of the UVSOR-II CHG-FEL in Helical Configuration”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC017, pp. 106-108.
[n] K. Soutome, M. Takao, and H. Tanaka, “Touschek Lifetime and Momentum Aperture of the SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A03, pp. 1569-1571.
[n] A. Faus-Golfe et al., “Optics Design and Beam Dynamics Simulation for a VHEE Radiobiology Beam Line at PRAE Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3444-3447. doi:10.18429/JACoW-IPAC2019-THPMP002
[n] S. L. Sheehy, D. J. Kelliher, S. Machida, K. J. Peach, H. Witte, and T. Yokoi, “PAMELA: Lattice Solution for a Medical C6+ Therapy Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA022, pp. 115-117.
[n] C.-K. Ng, K. Ko, N. Kroll, and R. Rimmer, “Coupling Network Simulation for the PEP-II RF Cavityfff”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2140-2143.
[n] F. Meot, “Polarization at eRHIC Electron Storage Ring, an Ergodic Approach”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 112-114. doi:10.18429/JACoW-IPAC2018-MOPMF014
[n] G. Fuchert et al., “New Superconductive Undulator Designs for use with Laser Wakefield Accelerators”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC06, pp. 507-510.
[n] D. Leitner et al., “Status of the Rare Isotope Reaccelerator Facility REA”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper FRYBA2, pp. 1458-1462.
[n] J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 280-282. doi:10.18429/JACoW-MEDSI2018-WEPH34
[n] K. Mahoney, O. Garza, E. Stitts, H. Areti, and M. O, “Jefferson Lab Personnel Safety Fast Beam Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P062, pp. 3681-3683.
[n] G. Penco, S. Di Mitri, and S. Spampinati, “The 100-MeV Beam Diagnostic Station for the FERMI Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC077, pp. 1230-1232.
[n] T. Ota et al., “Development of the Superconducting Cavity for ILC at TOSHIBA”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO023, pp. 418-420.
[n] A. Noda, A. Mizobuchi, M. Mutou, and M. Yoshizawa, “Permanent Quadrupole Magnet for Drift Tube Linacs”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0024, pp. 153-155.
[n] Y. Yamamoto et al., “Horizontal tests for crab cavities in KEKB”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP27, pp. XX-XX.
[n] H. Ohkuma et al., “Operational Performance of the SPring-8 Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH327, pp. 2824-2826.
[n] S. Thorin et al., “Bunch Compression by Linearising Achromats for the MAX IV Injector”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB34, pp. 471-474.
For LaTeX
Use Complete Form
For BibTeX
References
- T. K. Yang et al., “Status of Beam Diagnostics at KHIMA Facility”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 126-130.
- I. Sugai et al., “Realization of Thick Hybrid Type Carbon Stripper Foils with High Durability at 1800K for RCS of J-PARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS108, pp. 1753-1755.
- A. Y. Molodozhentsev, A. Ando, T. Koseki, M. J. Shirakata, J. Takano, and M. Tomizawa, “Study of the Beam Dynamics for the 'Fast Extraction' Operating Scenario of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD009, pp. 1937-1939.
- C. Bieth et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 431-434.
- M. Labat et al., “Operation of the UVSOR-II CHG-FEL in Helical Configuration”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC017, pp. 106-108.
- K. Soutome, M. Takao, and H. Tanaka, “Touschek Lifetime and Momentum Aperture of the SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A03, pp. 1569-1571.
- A. Faus-Golfe et al., “Optics Design and Beam Dynamics Simulation for a VHEE Radiobiology Beam Line at PRAE Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3444-3447.
- S. L. Sheehy, D. J. Kelliher, S. Machida, K. J. Peach, H. Witte, and T. Yokoi, “PAMELA: Lattice Solution for a Medical C6+ Therapy Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA022, pp. 115-117.
- C.-K. Ng, K. Ko, N. Kroll, and R. Rimmer, “Coupling Network Simulation for the PEP-II RF Cavityfff”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2140-2143.
- F. Meot, “Polarization at eRHIC Electron Storage Ring, an Ergodic Approach”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 112-114.
- G. Fuchert et al., “New Superconductive Undulator Designs for use with Laser Wakefield Accelerators”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC06, pp. 507-510.
- D. Leitner et al., “Status of the Rare Isotope Reaccelerator Facility REA”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper FRYBA2, pp. 1458-1462.
- J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 280-282.
- K. Mahoney, O. Garza, E. Stitts, H. Areti, and M. O, “Jefferson Lab Personnel Safety Fast Beam Kicker System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P062, pp. 3681-3683.
- G. Penco, S. Di Mitri, and S. Spampinati, “The 100-MeV Beam Diagnostic Station for the FERMI Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC077, pp. 1230-1232.
- T. Ota et al., “Development of the Superconducting Cavity for ILC at TOSHIBA”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO023, pp. 418-420.
- A. Noda, A. Mizobuchi, M. Mutou, and M. Yoshizawa, “Permanent Quadrupole Magnet for Drift Tube Linacs”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0024, pp. 153-155.
- Y. Yamamoto et al., “Horizontal tests for crab cavities in KEKB”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP27, pp. XX-XX.
- H. Ohkuma et al., “Operational Performance of the SPring-8 Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH327, pp. 2824-2826.
- S. Thorin et al., “Bunch Compression by Linearising Achromats for the MAX IV Injector”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB34, pp. 471-474.
Back to search