Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Favourites
For Word
[n] Y. Yano et al., “Design and Testing of the Horizontal Version of the Multi Beam Klystron for European XFEL Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD042, pp. 544-546.
[n] W. A. Barletta, “Modeling Photo-desorption in High Current Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2289-2292.
[n] S. V. Melanson, M. P. Dehnel, D. E. Potkins, H. C. McDonald, and C. Philpott, “H-, D-, C2-: A Comparison of RF andFilament Powered Volume-Cusp Ion Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1685-1687. doi:10.18429/JACoW-IPAC2017-TUPIK002
[n] M. Pieck, C. D. Hatch, J. O. Hill, H. A. Watkins, and E. E. Westbrook, “LANSCE Control System's 50th Anniversary”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 482-485. doi:10.18429/JACoW-NAPAC2022-TUPA62
[n] W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
[n] J. J. Song et al., “Deep X-Ray Lithography Fabrication of mmWave Cavities at the Advanced Photon Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4081, pp. 953-955.
[n] E. R. Gray, S. Nath, and T. P. Wangler, “Simulated Performance of the Superconducting Section of the APT Linac Under Various Fault and Error Conditions”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W018, pp. 1153-1155.
[n] P. Baudrenghien, J. Galindo, G. Hagmann, J. Noirjean, D. Stellfeld, and D. Valuch, “Commissioning of the Linac4 Low Level RF and Future Plans”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP027, pp. 892-894.
[n] S. L. Bogomolov et al., “Research on Metallic Ion Beam Production With Electron Cyclotron Resonance Ion Sources”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 62-65. doi:10.18429/JACoW-CYCLOTRONS2019-MOP017
[n] T. Fleck, R. B?ñr, and J. M. Mosthaf, “Status of the Control System for the Therapy Facility HIT”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP021, pp. 215-217.
[n] A. A. Efremov, A. I. Ivanenko, V. B. Kutner, J. Pivarc, and K. D. Tumanov, “Vacuum System for the DUBNA ECR-Ion Source DECRIS - 14”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1567-1570.
[n] J. B. Pearson et al., “Progress Towards Extraction of an Intense H- Beam from TRIUMF”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1269-1272.
[n] H. A. Watkins, W. C. Barkley, C. D. Hatch, D. Martinez, D. Rai, and E. I. Simakov, “Safety Considerations for Shield Door Control Systems”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 59-62. doi:10.18429/JACoW-IBIC2023-MOP011
[n] J. M. Arroyo et al., “RAM Methodology and Activities for IFMIF Engineering Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS060, pp. 3565-3567.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Yano et al., “Design and Testing of the Horizontal Version of the Multi Beam Klystron for European XFEL Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD042, pp. 544-546.
- W. A. Barletta, “Modeling Photo-desorption in High Current Storage Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2289-2292.
- S. V. Melanson, M. P. Dehnel, D. E. Potkins, H. C. McDonald, and C. Philpott, “H-, D-, C2-: A Comparison of RF andFilament Powered Volume-Cusp Ion Sources”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1685-1687.
- M. Pieck, C. D. Hatch, J. O. Hill, H. A. Watkins, and E. E. Westbrook, “LANSCE Control System's 50th Anniversary”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 482-485.
- W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
- J. J. Song et al., “Deep X-Ray Lithography Fabrication of mmWave Cavities at the Advanced Photon Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4081, pp. 953-955.
- E. R. Gray, S. Nath, and T. P. Wangler, “Simulated Performance of the Superconducting Section of the APT Linac Under Various Fault and Error Conditions”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W018, pp. 1153-1155.
- P. Baudrenghien, J. Galindo, G. Hagmann, J. Noirjean, D. Stellfeld, and D. Valuch, “Commissioning of the Linac4 Low Level RF and Future Plans”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP027, pp. 892-894.
- S. L. Bogomolov et al., “Research on Metallic Ion Beam Production With Electron Cyclotron Resonance Ion Sources”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 62-65.
- T. Fleck, R. B?ñr, and J. M. Mosthaf, “Status of the Control System for the Therapy Facility HIT”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP021, pp. 215-217.
- A. A. Efremov, A. I. Ivanenko, V. B. Kutner, J. Pivarc, and K. D. Tumanov, “Vacuum System for the DUBNA ECR-Ion Source DECRIS - 14”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1567-1570.
- J. B. Pearson et al., “Progress Towards Extraction of an Intense H- Beam from TRIUMF”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1269-1272.
- H. A. Watkins, W. C. Barkley, C. D. Hatch, D. Martinez, D. Rai, and E. I. Simakov, “Safety Considerations for Shield Door Control Systems”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP011, pp. 59-62.
- J. M. Arroyo et al., “RAM Methodology and Activities for IFMIF Engineering Design”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS060, pp. 3565-3567.
Back to search