Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Ren, W. Li, Y. Li, and M. Zeng, “Simulation for Radiation Field Caused by Beam Loss of C-ADS Injector II”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC47, pp. 489-491.
[n] A. Marqueta et al., “Machine Protection and Safe Operation of LIPAc Linear Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4178-4181. doi:10.18429/JACoW-IPAC2016-THPOY035
[n] M. Okamura, T. Kawaguchi, T. Tominaka, and T. Katayama, “Three Dimensional Field Analysis of Helical Magnet for RHIC Siberian Snake”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P016, pp. 3431-3433.
[n] A. Yu. Zelinsky, I. M. Karnaukhov, S. G. Kononenko, M. A. Strelkov, and A. S. Tarasenko, “Simulation of Correction for PSR-2000 Dynamic Aperture”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 691-694.
[n] T. Tanaka, T. Hara, T. Hatsui, H. Tanaka, K. Togawa, and M. Yabashi, “X-ray Based Undulator Commissioning in SACLA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOCI01, pp. 543-547.
[n] T. C. Tseng et al., “Bendable KB Type Focusing Mirrors Designed for TPS IR Beamline”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 17. doi:10.18429/JACoW-MEDSI2020-MOOB03
[n] E. D. Matias, L. Baribeau, T. Batten, J. W. Li, and W. A. Wurtz, “Achieving a Successful Alarm Management Deployment ÔÇô The CLS Experience”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB06, pp. 1062-1065.
[n] S. D. Blot, “Stability of the MICE Muon Beam Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP061, pp. 223-225.
[n] S. H. Han and Y. S. Cho, “Beam Profile Measurement with CCD Camera at PEFP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21007, pp. XX-XX.
[n] K. Harada, T. Kume, S. Nagahashi, N. Nakamura, S. Sakanaka, and A. Ueda, “The Magnet and Power Supply System for the Compact-ERL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2899-2901. doi:10.18429/JACoW-IPAC2015-WEPMA055
[n] S. Abeyratne and B. Erdelyi, “Optimization of the Multipole to Local Translation Operator in the Adaptive Fast Multipole Method”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA13, pp. 201-203.
[n] H. Takahashi, T. Kojima, T. Narita, K. Nishiyama, H. Sakaki, and K. Tsutsumi, “Development Status of PPS, MPS and TS for IFMIF/EVEDA Prototype Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS084, pp. 1734-1736.
[n] T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB019, unpublished.
[n] T. Sakai et al., “Design Optimization of 100 Kv DC Gun Wehnelt Electrode for FEL Linac at LEBRA”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO67, pp. 387-390.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Ren, W. Li, Y. Li, and M. Zeng, “Simulation for Radiation Field Caused by Beam Loss of C-ADS Injector II”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC47, pp. 489-491.
- A. Marqueta et al., “Machine Protection and Safe Operation of LIPAc Linear Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4178-4181.
- M. Okamura, T. Kawaguchi, T. Tominaka, and T. Katayama, “Three Dimensional Field Analysis of Helical Magnet for RHIC Siberian Snake”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P016, pp. 3431-3433.
- A. Yu. Zelinsky, I. M. Karnaukhov, S. G. Kononenko, M. A. Strelkov, and A. S. Tarasenko, “Simulation of Correction for PSR-2000 Dynamic Aperture”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 691-694.
- T. Tanaka, T. Hara, T. Hatsui, H. Tanaka, K. Togawa, and M. Yabashi, “X-ray Based Undulator Commissioning in SACLA”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THOCI01, pp. 543-547.
- T. C. Tseng et al., “Bendable KB Type Focusing Mirrors Designed for TPS IR Beamline”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 17.
- E. D. Matias, L. Baribeau, T. Batten, J. W. Li, and W. A. Wurtz, “Achieving a Successful Alarm Management Deployment ÔÇô The CLS Experience”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB06, pp. 1062-1065.
- S. D. Blot, “Stability of the MICE Muon Beam Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP061, pp. 223-225.
- S. H. Han and Y. S. Cho, “Beam Profile Measurement with CCD Camera at PEFP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21007, pp. XX-XX.
- K. Harada, T. Kume, S. Nagahashi, N. Nakamura, S. Sakanaka, and A. Ueda, “The Magnet and Power Supply System for the Compact-ERL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2899-2901.
- S. Abeyratne and B. Erdelyi, “Optimization of the Multipole to Local Translation Operator in the Adaptive Fast Multipole Method”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA13, pp. 201-203.
- H. Takahashi, T. Kojima, T. Narita, K. Nishiyama, H. Sakaki, and K. Tsutsumi, “Development Status of PPS, MPS and TS for IFMIF/EVEDA Prototype Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS084, pp. 1734-1736.
- T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB019, unpublished.
- T. Sakai et al., “Design Optimization of 100 Kv DC Gun Wehnelt Electrode for FEL Linac at LEBRA”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO67, pp. 387-390.
Back to search