Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Vitoratou and L. Bobb, “Overview of the pinhole camera design for the Diamond-II upgrade”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 369-373. doi:10.18429/JACoW-IBIC2025-TUPCO10
[n] U. Schaaf et al., “Impedances and Instability Studies at the ESR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 123-126.
[n] M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 841-843. doi:10.18429/JACoW-IPAC2015-MOPHA028
[n] P. Valente, B. Buonomo, D. G. C. Di Giulio, and L. G. Foggetta, “DANE BTF Improvements of the Transverse Beam Diagnostics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 250-252. doi:10.18429/JACoW-IPAC2017-MOPAB061
[n] B. Mustapha, S. V. Kutsaev, J. A. Nolen, and P. N. Ostroumov, “A Compact Linac Design for an Accelerator Driven System”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP003, pp. 52-54.
[n] M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
[n] I. Roth et al., “Long Pulse Solid-State Pulsed Power Systems Built to ESS Specifications”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 165-166. doi:10.18429/JACoW-NAPAC2016-MOPOB46
[n] D. S. Zhang, M. Li, C. Wang, J. J. Yang, and T. J. Zhang, “Physical Design of the Extraction Trim-Rods in a 230 MeV Superconducting Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 61-63. doi:10.18429/JACoW-Cyclotrons2016-MOP06
[n] J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, X. Liu, and S. De Santis, “A Comparison of Electron Cloud Density Measurements at CesrTA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA071, pp. 843-845.
[n] D. Schrage et al., “A Flight-Qualified RFQ for the BEAR Project”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-08, pp. 54-57.
[n] V. V. Balakin, D. E. Berkaev, V. M. Borin, F. A. Emanov, and O. I. Meshkov, “Longitudinal Beam Measuruments on Damping Ring BINP's Injection Complex With New Resonator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 453-455. doi:10.18429/JACoW-RUPAC2018-THPSC22
[n] K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
[n] H. Tian, M. Kelley, C. Reece, L. Plucinski, K. Smith, and S. Wang, “Surface Studies of Niobium Chemically Polished Under Conditions for SRF Cavity Production”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA10, pp. 193-193.
[n] M. G. Billing, M. Liepe, V. D. Shemelin, and N. R. A. Valles, “Beam Position Monitor within the Cornell Energy Recovery Linac Cavity Assembly”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA070, pp. 840-842.
[n] L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2067-2070. doi:10.18429/JACoW-IPAC2019-TUPTS065
[n] K. Tinschert, R. Lang, J. Maeder, J. Rossbach, P. Spaedtke, and A. Yakushev, “Ion Beam Production from Rare Isotopes with GSI ECR Ion Sources”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-14, pp. 97-101.
[n] K. L. F. Bane et al., “Untrapped HOM Radiation Absorption in the LCLS-II Cryomodules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP126, pp. 351-354.
[n] W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
[n] T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836.
[n] S. Lueders, “STUXNET and the Impact on Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRAAULT02, pp. 1285-1288.
[n] B. Franzke et al., “Performance of the Heavy Ion Storage Ring ESR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 444-447.
[n] P. Dhakal, “Thermodynamic Properties of Srf Niobium”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 884-887. doi:10.18429/JACoW-SRF2023-WEPWB125
[n] F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1626-1629. doi:10.18429/JACoW-IPAC2018-TUPML039
[n] V. Rybnikov and A. Sulc, “A Data Acquisition Middle Layer Server with Python Support for Linac Operation and Experiments Monitoring and Control”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1330-1334. doi:10.18429/JACoW-ICALEPCS2023-THPDP017
[n] N. I. Andreev et al., “Development and Study of the UNK Superconducting Quadrupole Magnet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2280-2283.
[n] Y. Mori, “The Design and R&D Works for the 50-GeV Synchrotron of Japan Hadron Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D001, pp. 375-377.
[n] F. Jackson, D. Angal-Kalinin, J. K. Jones, P. H. Williams, and A. Wolski, “Longitudinal Beam Transport in the ALICE IR-FEL Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA063, pp. 2262-2264.
[n] D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3662-3665. doi:10.18429/JACoW-IPAC2017-THOBB1
[n] T. Kobayashi et al., “HOM Characteristics of the ARES Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P043, pp. 3069-3071.
[n] K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
[n] W. S. Graves et al., “Ultrashort Electron Bunch Length Measurements at DUVFEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH058, pp. 2224-2226.
[n] P. He et al., “Accurate offline calibration and simulation analysis of various types of BPM position sensitivity”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEPCO35, unpublished.
[n] N. V. Vasiliev, A. A. Glazov, V. A. Kochkin, D. L. Novikov, and E. N. Zaplatin, “Prototype of the Accelerating Resonator for the Superconducting Sector Deuteron Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1017-1020.
[n] S. V. Barabin et al., “Emittance Measurement on Krion-6T Ion Source by Pepper-Pot Method”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 207-210. doi:10.18429/JACoW-RUPAC2018-TUPSA29
[n] V. Chetvertkova et al., “MadX Tracking Simulations to Determine the Beam loss Distributions for the LHC Quench Tests with ADT Excitation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3991-3994. doi:10.18429/JACoW-IPAC2014-THPRI094
[n] Y. M. Pischalnikov et al., “Modified Slow Tuner Design for Cavity 1 Inside LCLS II Cryomodules”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2684-2686. doi:10.18429/JACoW-IPAC2018-WEPML006
[n] P. Boonpornprasert et al., “Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 38-40. doi:10.18429/JACoW-FEL2019-TUP001
[n] M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1693-1695. doi:10.18429/JACoW-IPAC2015-TUPJE037
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] Z. Liu, T. Russo, R. C. Webber, Y. Yamazaki, and Y. Zhang, “Beam Loss Monitor System for Low-Energy Heavy-Ion FRIB Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC46, pp. 186-188.
[n] H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. IPAC'20, Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
[n] K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1766-1768. doi:10.18429/JACoW-IPAC2016-TUPOW011
[n] T. Honda et al., “Beam Transport Lines of the KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B05, pp. 2249-2251.
[n] A. V. Petrenko and K. V. Astrelina, “Measurement of Beam Parameters in the VEPP-5 Damping Ring Using Betatron Oscillations Decoherence”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB031, pp. 385-387.
[n] A. V. Velez, H.-W. Glock, J. Knobloch, and A. Neumann, “Hom Damping Optimization Design Studies for BESSY VSR Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2774-2776. doi:10.18429/JACoW-IPAC2015-WEPMA013
[n] V. Judin et al., “Studies of Bursting CSR in Multi-bunch Operation at the ANKA Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 225-227. doi:10.18429/JACoW-IPAC2014-MOPRO063
[n] W. Namkung et al., “Commissioning of PLS 2 GeV Electron Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 742-745.
[n] Y. Ohnishi et al., “Optics Measurements and Corrections at the Early Commissioning of SuperKEKB”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3782-3784. doi:10.18429/JACoW-IPAC2016-THPOR007
[n] N. Hayashi et al., “Progress of Injection Energy Upgrade Project for J-PARC RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO032, pp. 3833-3835.
[n] Y. X. Jiang et al., “Study on Antenna Array of Surface Wave Plasma Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG030, unpublished.
[n] M. Mahgoub et al., “Application and Design of the Streak and TV Readout Systems at PITZ”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB27, pp. 613-616.
[n] N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
[n] Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP024, unpublished.
[n] Y. H. Wu and Y.-J. Chen, “ENSOLVE : A Simulation Code for FXR LIA Downstream Section”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2271-2273. doi:10.18429/JACoW-IPAC2018-WEPAL044
[n] S. R. Koscielniak, “Electromagnetic Impulse of Beam Density F(x,?áy)G(z)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 75-77. doi:10.18429/JACoW-IPAC2019-MOPGW007
[n] L. C. Cao et al., “The Design of Scanning Control System for Proton Therapy Facility at CIAE”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 319-321. doi:10.18429/JACoW-IBIC2018-TUPC10
[n] Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
[n] F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “A Fast Particle Tracking Tool for the Simulation of Dielectric Laser Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3716-3719. doi:10.18429/JACoW-IPAC2017-THPAB013
[n] Q. Zhao et al., “FRIB Accelerator Beam Dynamics Design and Challenges”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B01, pp. 404-408.
[n] G. Wolber, “Invited Paper: A Critical Evaluation of the Role of the Cyclotron in Radiation Therapy”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper L02, pp. 526-533.
[n] R. D. Kephart, “SRF Cavity Research for Project X”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B03, pp. 541-545.
[n] M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3417-3419. doi:10.18429/JACoW-IPAC2016-THPMR014
[n] D. Raparia, “Acceleration and Transportation of Multiple Ion Species at Ebis-based Preinjector”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B02, pp. 409-413.
[n] V. Yakimenko, I. Ben-Zvi, J. B. Murphy, S. Pjerov, and J. H. Wu, “Optics for a Photoinjected Energy Recovery Linac at the NSLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH051, pp. 3344-3346.
[n] Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 151-156.
[n] N. M. Jecklin et al., “Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP073, pp. 611-613.
[n] A. Lara, I. Podadera, and F. Toral, “RF Design of the Re-buncher Cavities for the LIPAC Deuteron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC047, pp. 184-186.
[n] C. H. Yi, M.-H. Cho, S. H. Kim, H. Lee, and W. Namkung, “Design and Machine Features of 2.2-m C-band Accelerating Structure”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC035, pp. 148-150.
[n] W. J. Corbett, W. Y. Mok, and K. Tian, “Bunch Pattern Measurement via Single Photon Counting at SPEAR3”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD21, pp. 195-198.
[n] Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
[n] J. Jia, “Harmonic Amplifier Free Electron Laser”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS41, pp. XX-XX.
[n] S. X. Peng et al., “Study on Space Charge Compensation of Low Energy High Intensity Ion Beam in Peking University”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 453-457. doi:10.18429/JACoW-HB2016-WEPM6Y01
[n] Y. D. Chernousov, A. M. Barnyakov, A. E. Levichev, V. M. Pavlov, V. Ivannikov, and I. V. Shebolaev, “Localization of the RF Breakdown in the Parallel Coupled Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA018, pp. 281-283.
[n] M. A. Kempkes, M. P. J. Gaudreau, J. Kinross-Wright, and I. Roth, “Modular Multiple Frequency RF Amplifier”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN114, pp. 2304-2306.
[n] W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 640-644. doi:10.18429/JACoW-ICALEPCS2015-WED3O01
[n] G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 451-453. doi:10.18429/JACoW-IPAC2014-MOPME033
[n] M. Boscolo and H. Burkhardt, “Tracking Simulation for Beam Loss Studies with Application to FCC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2004-2006. doi:10.18429/JACoW-IPAC2015-TUPTY004
[n] E. Pl?Ânjes, B. Faatz, J. Feldhaus, M. Kuhlmann, K. I. Tiedtke, and R. Treusch, “FLASH2 Beamline and Phontondiagnostics Concepts”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO50, pp. 614-617.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Vitoratou and L. Bobb, “Overview of the pinhole camera design for the Diamond-II upgrade”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 369-373.
- U. Schaaf et al., “Impedances and Instability Studies at the ESR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 123-126.
- M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 841-843.
- P. Valente, B. Buonomo, D. G. C. Di Giulio, and L. G. Foggetta, “DANE BTF Improvements of the Transverse Beam Diagnostics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 250-252.
- B. Mustapha, S. V. Kutsaev, J. A. Nolen, and P. N. Ostroumov, “A Compact Linac Design for an Accelerator Driven System”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP003, pp. 52-54.
- M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
- I. Roth et al., “Long Pulse Solid-State Pulsed Power Systems Built to ESS Specifications”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 165-166.
- D. S. Zhang, M. Li, C. Wang, J. J. Yang, and T. J. Zhang, “Physical Design of the Extraction Trim-Rods in a 230 MeV Superconducting Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 61-63.
- J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, X. Liu, and S. De Santis, “A Comparison of Electron Cloud Density Measurements at CesrTA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA071, pp. 843-845.
- D. Schrage et al., “A Flight-Qualified RFQ for the BEAR Project”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-08, pp. 54-57.
- V. V. Balakin, D. E. Berkaev, V. M. Borin, F. A. Emanov, and O. I. Meshkov, “Longitudinal Beam Measuruments on Damping Ring BINP's Injection Complex With New Resonator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 453-455.
- K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
- H. Tian, M. Kelley, C. Reece, L. Plucinski, K. Smith, and S. Wang, “Surface Studies of Niobium Chemically Polished Under Conditions for SRF Cavity Production”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA10, pp. 193-193.
- M. G. Billing, M. Liepe, V. D. Shemelin, and N. R. A. Valles, “Beam Position Monitor within the Cornell Energy Recovery Linac Cavity Assembly”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA070, pp. 840-842.
- L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2067-2070.
- K. Tinschert, R. Lang, J. Maeder, J. Rossbach, P. Spaedtke, and A. Yakushev, “Ion Beam Production from Rare Isotopes with GSI ECR Ion Sources”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-14, pp. 97-101.
- K. L. F. Bane et al., “Untrapped HOM Radiation Absorption in the LCLS-II Cryomodules”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP126, pp. 351-354.
- W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
- T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836.
- S. Lueders, “STUXNET and the Impact on Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRAAULT02, pp. 1285-1288.
- B. Franzke et al., “Performance of the Heavy Ion Storage Ring ESR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 444-447.
- P. Dhakal, “Thermodynamic Properties of Srf Niobium”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB125, pp. 884-887.
- F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1626-1629.
- V. Rybnikov and A. Sulc, “A Data Acquisition Middle Layer Server with Python Support for Linac Operation and Experiments Monitoring and Control”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP017, pp. 1330-1334.
- N. I. Andreev et al., “Development and Study of the UNK Superconducting Quadrupole Magnet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2280-2283.
- Y. Mori, “The Design and R&D Works for the 50-GeV Synchrotron of Japan Hadron Facility”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D001, pp. 375-377.
- F. Jackson, D. Angal-Kalinin, J. K. Jones, P. H. Williams, and A. Wolski, “Longitudinal Beam Transport in the ALICE IR-FEL Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA063, pp. 2262-2264.
- D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3662-3665.
- T. Kobayashi et al., “HOM Characteristics of the ARES Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P043, pp. 3069-3071.
- K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
- W. S. Graves et al., “Ultrashort Electron Bunch Length Measurements at DUVFEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH058, pp. 2224-2226.
- P. He et al., “Accurate offline calibration and simulation analysis of various types of BPM position sensitivity”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper WEPCO35, unpublished.
- N. V. Vasiliev, A. A. Glazov, V. A. Kochkin, D. L. Novikov, and E. N. Zaplatin, “Prototype of the Accelerating Resonator for the Superconducting Sector Deuteron Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1017-1020.
- S. V. Barabin et al., “Emittance Measurement on Krion-6T Ion Source by Pepper-Pot Method”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 207-210.
- V. Chetvertkova et al., “MadX Tracking Simulations to Determine the Beam loss Distributions for the LHC Quench Tests with ADT Excitation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3991-3994.
- Y. M. Pischalnikov et al., “Modified Slow Tuner Design for Cavity 1 Inside LCLS II Cryomodules”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2684-2686.
- P. Boonpornprasert et al., “Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 38-40.
- M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1693-1695.
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- Z. Liu, T. Russo, R. C. Webber, Y. Yamazaki, and Y. Zhang, “Beam Loss Monitor System for Low-Energy Heavy-Ion FRIB Accelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC46, pp. 186-188.
- H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
- K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1766-1768.
- T. Honda et al., “Beam Transport Lines of the KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B05, pp. 2249-2251.
- A. V. Petrenko and K. V. Astrelina, “Measurement of Beam Parameters in the VEPP-5 Damping Ring Using Betatron Oscillations Decoherence”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB031, pp. 385-387.
- A. V. Velez, H.-W. Glock, J. Knobloch, and A. Neumann, “Hom Damping Optimization Design Studies for BESSY VSR Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2774-2776.
- V. Judin et al., “Studies of Bursting CSR in Multi-bunch Operation at the ANKA Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 225-227.
- W. Namkung et al., “Commissioning of PLS 2 GeV Electron Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 742-745.
- Y. Ohnishi et al., “Optics Measurements and Corrections at the Early Commissioning of SuperKEKB”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3782-3784.
- N. Hayashi et al., “Progress of Injection Energy Upgrade Project for J-PARC RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO032, pp. 3833-3835.
- Y. X. Jiang et al., “Study on Antenna Array of Surface Wave Plasma Source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG030, unpublished.
- M. Mahgoub et al., “Application and Design of the Streak and TV Readout Systems at PITZ”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB27, pp. 613-616.
- N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
- Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP024, unpublished.
- Y. H. Wu and Y.-J. Chen, “ENSOLVE : A Simulation Code for FXR LIA Downstream Section”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2271-2273.
- S. R. Koscielniak, “Electromagnetic Impulse of Beam Density F(x,?áy)G(z)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 75-77.
- L. C. Cao et al., “The Design of Scanning Control System for Proton Therapy Facility at CIAE”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 319-321.
- Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
- F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “A Fast Particle Tracking Tool for the Simulation of Dielectric Laser Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3716-3719.
- Q. Zhao et al., “FRIB Accelerator Beam Dynamics Design and Challenges”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3B01, pp. 404-408.
- G. Wolber, “Invited Paper: A Critical Evaluation of the Role of the Cyclotron in Radiation Therapy”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper L02, pp. 526-533.
- R. D. Kephart, “SRF Cavity Research for Project X”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B03, pp. 541-545.
- M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3417-3419.
- D. Raparia, “Acceleration and Transportation of Multiple Ion Species at Ebis-based Preinjector”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3B02, pp. 409-413.
- V. Yakimenko, I. Ben-Zvi, J. B. Murphy, S. Pjerov, and J. H. Wu, “Optics for a Photoinjected Energy Recovery Linac at the NSLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH051, pp. 3344-3346.
- Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 151-156.
- N. M. Jecklin et al., “Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP073, pp. 611-613.
- A. Lara, I. Podadera, and F. Toral, “RF Design of the Re-buncher Cavities for the LIPAC Deuteron Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC047, pp. 184-186.
- C. H. Yi, M.-H. Cho, S. H. Kim, H. Lee, and W. Namkung, “Design and Machine Features of 2.2-m C-band Accelerating Structure”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC035, pp. 148-150.
- W. J. Corbett, W. Y. Mok, and K. Tian, “Bunch Pattern Measurement via Single Photon Counting at SPEAR3”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD21, pp. 195-198.
- Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
- J. Jia, “Harmonic Amplifier Free Electron Laser”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS41, pp. XX-XX.
- S. X. Peng et al., “Study on Space Charge Compensation of Low Energy High Intensity Ion Beam in Peking University”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 453-457.
- Y. D. Chernousov, A. M. Barnyakov, A. E. Levichev, V. M. Pavlov, V. Ivannikov, and I. V. Shebolaev, “Localization of the RF Breakdown in the Parallel Coupled Accelerating Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA018, pp. 281-283.
- M. A. Kempkes, M. P. J. Gaudreau, J. Kinross-Wright, and I. Roth, “Modular Multiple Frequency RF Amplifier”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN114, pp. 2304-2306.
- W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 640-644.
- G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 451-453.
- M. Boscolo and H. Burkhardt, “Tracking Simulation for Beam Loss Studies with Application to FCC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2004-2006.
- E. Pl?Ânjes, B. Faatz, J. Feldhaus, M. Kuhlmann, K. I. Tiedtke, and R. Treusch, “FLASH2 Beamline and Phontondiagnostics Concepts”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO50, pp. 614-617.
Back to search