Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Marchetti et al., “X-Band TDS Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 184-187. doi:10.18429/JACoW-IPAC2017-MOPAB044
[n] J. R. Delayen and H. Wang, “Design of Superconducting Parallel Bar Deflecting and Crabbing RF Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP053, pp. 2120-2122.
[n] P. J. Phillips et al., “Single Shot Longitudinal Bunch Profile Measurements by Temporally Resolved Electro-Optical Detection”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEO2A02, pp. 221-223.
[n] L. M. Bobb, N. Chritin, T. Lefevre, M. G. Billing, and V. Karataev, “UV/X-ray Diffraction Radiation for Non-intercepting Micron-scale Beam Size Measurement”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCC01, pp. 24-28.
[n] K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX.
[n] L. Shi et al., “Dielectric Waveguide-Based THz Radiator Study for SwissFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 94-97. doi:10.18429/JACoW-LINAC2018-MOPO034
[n] M. J. Chin, W. Barry, F. Sannibale, and J. M. Weber, “Advanced Light Source FGPA-based Bunch Cleaning”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF074, pp. 287-289.
[n] J. M. Weber, M. J. Chin, C. Steier, and E. C. Williams, “ALS FPGA-Based Digital Power Supply Controller for Ramped Power Supplies in the Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP009, pp. 1550-1552.
[n] T. H. Luo et al., “Progress on the MICE RF Module at LBNL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 454-456. doi:10.18429/JACoW-IPAC2016-MOPMW028
[n] E. C. Williams et al., “New EPICS Display Manager in WPF”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP101, pp. 877-879.
[n] M. Sapinski et al., “Ionization Profile Monitor Simulations - Status and Future Plans”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 520-523. doi:10.18429/JACoW-IBIC2016-TUPG71
[n] J. Qiang, S. Paret, K. Ohmi, and T. Pieloni, “Strong-Strong Beam-Beam Simulation of Bunch Length Splitting at the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2210-2213. doi:10.18429/JACoW-IPAC2015-TUPTY077
[n] C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2650-2653. doi:10.18429/JACoW-IPAC2019-WEPGW076
[n] T. Hofmann et al., “Design of a Laser-based Profile Monitor for LINAC4 Commissioning at 50 MeV and 100 MeV”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 451-455. doi:10.18429/JACoW-IBIC2015-TUPB055
[n] R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Tevatron Optics Measurements using an AC Dipole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN102, pp. 3465-3467.
[n] Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19.
[n] F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3486-3489.
[n] F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829.
[n] E. W. Nissen and T. Satogata, “Revised Optics Design for the JLEIC Ion Booster”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3537-3539. doi:10.18429/JACoW-IPAC2018-THPAK126
[n] M. Otevrel et al., “Diagnostics at PITZ 2.0 Beamline: Status and New Developments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP033, pp. 634-636.
[n] V. R. Arsov et al., “Commissioning and Results from the Bunch Arrival-time Monitor Downstream the Bunch Compressor at the SwissFEL Test Injector”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP085, pp. 933-936.
[n] T. Eriksson et al., “AD Status and Consolidation Plans”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOPM2HA02, pp. 36-39.
[n] D. Zhou, Y. H. Chin, K. Ohmi, and G. V. Stupakov, “Calculation of Coherent Wiggler Radiation using Eigenfunction Expansion Method”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR054, pp. 3048-3050.
[n] T. N. Khabiboulline et al., “Update of Beam Optics and SRF Cavities for Project X”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO092, pp. 3975-3977.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Marchetti et al., “X-Band TDS Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 184-187.
- J. R. Delayen and H. Wang, “Design of Superconducting Parallel Bar Deflecting and Crabbing RF Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP053, pp. 2120-2122.
- P. J. Phillips et al., “Single Shot Longitudinal Bunch Profile Measurements by Temporally Resolved Electro-Optical Detection”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEO2A02, pp. 221-223.
- L. M. Bobb, N. Chritin, T. Lefevre, M. G. Billing, and V. Karataev, “UV/X-ray Diffraction Radiation for Non-intercepting Micron-scale Beam Size Measurement”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCC01, pp. 24-28.
- K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX.
- L. Shi et al., “Dielectric Waveguide-Based THz Radiator Study for SwissFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 94-97.
- M. J. Chin, W. Barry, F. Sannibale, and J. M. Weber, “Advanced Light Source FGPA-based Bunch Cleaning”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF074, pp. 287-289.
- J. M. Weber, M. J. Chin, C. Steier, and E. C. Williams, “ALS FPGA-Based Digital Power Supply Controller for Ramped Power Supplies in the Booster”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP009, pp. 1550-1552.
- T. H. Luo et al., “Progress on the MICE RF Module at LBNL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 454-456.
- E. C. Williams et al., “New EPICS Display Manager in WPF”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP101, pp. 877-879.
- M. Sapinski et al., “Ionization Profile Monitor Simulations - Status and Future Plans”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 520-523.
- J. Qiang, S. Paret, K. Ohmi, and T. Pieloni, “Strong-Strong Beam-Beam Simulation of Bunch Length Splitting at the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2210-2213.
- C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2650-2653.
- T. Hofmann et al., “Design of a Laser-based Profile Monitor for LINAC4 Commissioning at 50 MeV and 100 MeV”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 451-455.
- R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Tevatron Optics Measurements using an AC Dipole”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN102, pp. 3465-3467.
- Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19.
- F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3486-3489.
- F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829.
- E. W. Nissen and T. Satogata, “Revised Optics Design for the JLEIC Ion Booster”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3537-3539.
- M. Otevrel et al., “Diagnostics at PITZ 2.0 Beamline: Status and New Developments”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP033, pp. 634-636.
- V. R. Arsov et al., “Commissioning and Results from the Bunch Arrival-time Monitor Downstream the Bunch Compressor at the SwissFEL Test Injector”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP085, pp. 933-936.
- T. Eriksson et al., “AD Status and Consolidation Plans”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOPM2HA02, pp. 36-39.
- D. Zhou, Y. H. Chin, K. Ohmi, and G. V. Stupakov, “Calculation of Coherent Wiggler Radiation using Eigenfunction Expansion Method”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR054, pp. 3048-3050.
- T. N. Khabiboulline et al., “Update of Beam Optics and SRF Cavities for Project X”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO092, pp. 3975-3977.
Back to search