Favourites
For Word
[n] D. J. Barofsky et al., “Automation of the ReAccelerator Linac Phasing”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2170-2172. doi:10.18429/JACoW-IPAC2021-TUPAB292
[n] S. Hirlaender, R. Alemany-Fernandez, H. Bartosik, N. Biancacci, and V. Kain, “Studies of the Injection and Cooling Efficiency in LEIR Using the Longitudinal Schottky Spectrum”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 765-767. doi:10.18429/JACoW-IPAC2018-TUPAF036
[n] F. Sonnemann and F. Rodriguez-Mateos, “Quench Heater Studies for the LHC Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH094, pp. 3451-3453.
[n] N. J. Sammut, H. Burkhardt, C. Giloux, W. Venturini Delsolaro, and S. M. White, “Measurements and Effects of the Magnetic Hysteresis on the LHC Crossing Angle and Separation Bumps”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP005, pp. 2530-2532.
[n] M. Boscolo and H. Burkhardt, “Lost Particles in the IR and Issues for Beam Induced Backgrounds in Higgs Factories”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT1B2, pp. 169-173.
[n] D. B. Cline et al., “Proton Beam Diagnostic in the Fermilab Electron Cooling Experiment”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3302-3304.
[n] B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432.
[n] H. Kawaguchi and Y. Fujita, “Portable High Performance Computing for Microwave Simulation by FDTD/FIT Machines”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IODN03, pp. 35-37.
[n] M. W. Krasny et al., “The CERN Gamma Factory Initiative: An Ultra-High Intensity Gamma Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1780-1783. doi:10.18429/JACoW-IPAC2018-WEYGBD3
[n] H. Burkhardt and M. Boscolo, “Tools for Flexible Optimisation of IR Designs with Application to FCC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2072-2074. doi:10.18429/JACoW-IPAC2015-TUPTY031
[n] R. Nelson and S. Holben, “Operating Experience and Reliability Improvements on the 5 kW CW Klystron at Jefferson Lab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P037, pp. 3165-3167.
[n] C. Omet et al., “SIS100 Tunnel Design and Status”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3316-3319. doi:10.18429/JACoW-IPAC2017-WEPVA029
[n] S. Machida, S. S. Gilardoni, M. Giovannozzi, S. Hirlaender, A. Huschauer, and C. R. Prior, “Intensity Effects in the Formation of Stable Islands in Phase Space During the Multi-Turn Extraction Process at the CERN PS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 283-287. doi:10.18429/JACoW-HB2016-TUAM7X01
For LaTeX
Use Complete Form
For BibTeX
References
- D. J. Barofsky et al., “Automation of the ReAccelerator Linac Phasing”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2170-2172.
- S. Hirlaender, R. Alemany-Fernandez, H. Bartosik, N. Biancacci, and V. Kain, “Studies of the Injection and Cooling Efficiency in LEIR Using the Longitudinal Schottky Spectrum”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 765-767.
- F. Sonnemann and F. Rodriguez-Mateos, “Quench Heater Studies for the LHC Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH094, pp. 3451-3453.
- N. J. Sammut, H. Burkhardt, C. Giloux, W. Venturini Delsolaro, and S. M. White, “Measurements and Effects of the Magnetic Hysteresis on the LHC Crossing Angle and Separation Bumps”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP005, pp. 2530-2532.
- M. Boscolo and H. Burkhardt, “Lost Particles in the IR and Issues for Beam Induced Backgrounds in Higgs Factories”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SAT1B2, pp. 169-173.
- D. B. Cline et al., “Proton Beam Diagnostic in the Fermilab Electron Cooling Experiment”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3302-3304.
- B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432.
- H. Kawaguchi and Y. Fujita, “Portable High Performance Computing for Microwave Simulation by FDTD/FIT Machines”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IODN03, pp. 35-37.
- M. W. Krasny et al., “The CERN Gamma Factory Initiative: An Ultra-High Intensity Gamma Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1780-1783.
- H. Burkhardt and M. Boscolo, “Tools for Flexible Optimisation of IR Designs with Application to FCC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2072-2074.
- R. Nelson and S. Holben, “Operating Experience and Reliability Improvements on the 5 kW CW Klystron at Jefferson Lab”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P037, pp. 3165-3167.
- C. Omet et al., “SIS100 Tunnel Design and Status”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3316-3319.
- S. Machida, S. S. Gilardoni, M. Giovannozzi, S. Hirlaender, A. Huschauer, and C. R. Prior, “Intensity Effects in the Formation of Stable Islands in Phase Space During the Multi-Turn Extraction Process at the CERN PS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 283-287.
Back to search