Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. D. O et al., “Measurement of the UCLA/URLS/INFN Hybrid Gun”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS035, pp. 2418-2420.
[n] K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1684-1687.
[n] J. R. Chen, G. Y. Hsiung, K. T. Hsu, C. H. Kuo, and T. F. Lin, “Development of Local Orbit Feedback for Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP45C, pp. 1714-1716.
[n] R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
[n] M. Ichikawa, H. Fujisawa, Y. Iwashita, T. Sugimoto, H. Tongu, and M. Yamada, “Development of Very Small ECR H+ Ion Source with Pulse Gas Valve”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP032, pp. 423-425.
[n] V. Sajaev, A. Douryan, R. Malone, X. Wang, and V. Yakimenko, “Diagnostics and Correction of the Electron Beam Trajectory in the Cornell Wiggler at the Accelerator Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA151, pp. 2942-2944.
[n] R. L. Warnock, J. A. Ellison, K. A. Heinemann, and G. Q. Zhang, “Meshless Solution of the Vlasov Equation Using a Low-discrepancy Sequence”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP109, pp. 1776-1778.
[n] J. Haimson, “A Low Emittance High Duty Factor Injector Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 592-595.
[n] R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
[n] D. Alesini et al., “Sliced Beam Parameter Measurements”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUOA01, pp. 146-150.
[n] J. C. Huang, H. Kitamura, T. Kohda, C. K. Yang, and C. S. Yang, “Performance of TPS Cryogenic Permanent Magnet Undulators at NSRRC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4278-4280. doi:10.18429/JACoW-IPAC2019-THPTS071
[n] W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
[n] P. S. Martin, “Operational Experience with Superconducting Synchrotron Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1379-1383.
[n] L. P. Michelotti and S. Ohnuma, “Dipole Shuffling in the Fermilab Energy Saver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2472-2475.
[n] D. Schulte, G. Arduini, V. Baglin, J. M. Jimenez, and F. Zimmermann, “Electron Cloud Measurements in the SPS in 2004”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAP014, pp. 1371-1373.
[n] J. H. H. Lee, K.-J. Boller, T. Denis, and P. J. M. van der Slot, “The Design Of A Multi-Beam Electron Gun For A Photonic Free-Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB20, pp. 427-430.
[n] K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
[n] H. A. Baldis et al., “Electron Beam and RF Characterization of a High-Brightness X-Band Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH065, pp. 2245-2247.
[n] D. Kipnis, E. Dyunin, and A. Gover, “Smith-Purcell Distributed Feedback Laser”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP049, pp. XX-XX.
[n] W.-T. Weng et al., “Comparison of Accelerator Technologies for use in ADSS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBN3, pp. 4-6.
[n] L. K. Len et al., “The NRL Modified Betatron Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 446-449.
[n] C. R. Chen et al., “The Correlation between the Beam Orbit Stability and the Utilities at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP38C, pp. 2309-2311.
[n] J.-C. Denard, A. Saha, and G. Lavessière, “High Accuracy Beam Current Monitor System for CEBAF's Experimental Hall A”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH103, pp. 2326-2328.
[n] M. Kondo, “Invited Paper: Recent Developments at the Osaka RCNP 230-cm Cyclotron and a Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-06, pp. 1904-1911.
[n] F. Hinode et al., “Commissioning of ITC-RF Gun for t-ACTS Project at Tohoku University”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA31, pp. 547-550.
[n] W. X. Cheng et al., “NSLS2 Diagnostic Systems Commissioning and Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOIZB1, pp. 16-23.
[n] J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588.
[n] C. P. Neuman, W. S. Graves, and P. G. O'Shea, “A Non-Interrupting Electron Beam Diagnostic using Coherent Off-Axis Undulator Radiation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA28, pp. 1949-1951.
[n] J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
[n] R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
[n] R. L. Poirier, I. Enchevich, T. Enegren, and S. J. Mai, “Parallel Bias vs Perpendicular Bias of a Ferrite Tuned Cavity for the TRIUMF KAON-Factory Bosster Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1321-1324.
[n] V. Petrillo et al., “Generation of a Train of Short Pulses by Means of FEL Emission of a Combed Electron Beam”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOICNO01, pp. 2-5.
[n] J. I. M. Botman, H. L. Hagedoorn, W. J. G. M, J. A. Van Der Heide, and W. Van Genderren, “Proposal for Racetrack Microtrons as Driver for a Free Electron Laser and as Injector for an Electron Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 453-456.
[n] H. Hsieh, R. Yourd, and M. Zisman, “Design and Construction of the PEP-II Low-Energy Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP099G, pp. 454-456.
[n] F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
[n] H. Zhu, X. C. Lou, and Q. L. Xiu, “Detector Beam Background Simulations for CEPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT2A2, pp. 184-187.
[n] D. E. Johnson and S. Ohnuma, “MESSYMESH - An Improved Version”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C02, pp. 119-121.
[n] S. Ohnuma, “Computer Programs for Particle Motion in Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 1-02, pp. 14-28.
[n] W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
[n] X. Liu, T. Adachi, S. Harada, T. Iwashita, K. Takayama, and T. Yoshimoto, “Longitudinal Beam Motion in the KEK Digital Accelerator: Tracking Simulation and Experimental Results”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO13, pp. 83-88.
For LaTeX
Use Complete Form
For BibTeX
References
- B. D. O et al., “Measurement of the UCLA/URLS/INFN Hybrid Gun”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS035, pp. 2418-2420.
- K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1684-1687.
- J. R. Chen, G. Y. Hsiung, K. T. Hsu, C. H. Kuo, and T. F. Lin, “Development of Local Orbit Feedback for Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP45C, pp. 1714-1716.
- R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
- M. Ichikawa, H. Fujisawa, Y. Iwashita, T. Sugimoto, H. Tongu, and M. Yamada, “Development of Very Small ECR H+ Ion Source with Pulse Gas Valve”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP032, pp. 423-425.
- V. Sajaev, A. Douryan, R. Malone, X. Wang, and V. Yakimenko, “Diagnostics and Correction of the Electron Beam Trajectory in the Cornell Wiggler at the Accelerator Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA151, pp. 2942-2944.
- R. L. Warnock, J. A. Ellison, K. A. Heinemann, and G. Q. Zhang, “Meshless Solution of the Vlasov Equation Using a Low-discrepancy Sequence”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP109, pp. 1776-1778.
- J. Haimson, “A Low Emittance High Duty Factor Injector Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 592-595.
- R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
- D. Alesini et al., “Sliced Beam Parameter Measurements”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUOA01, pp. 146-150.
- J. C. Huang, H. Kitamura, T. Kohda, C. K. Yang, and C. S. Yang, “Performance of TPS Cryogenic Permanent Magnet Undulators at NSRRC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4278-4280.
- W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
- P. S. Martin, “Operational Experience with Superconducting Synchrotron Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1379-1383.
- L. P. Michelotti and S. Ohnuma, “Dipole Shuffling in the Fermilab Energy Saver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2472-2475.
- D. Schulte, G. Arduini, V. Baglin, J. M. Jimenez, and F. Zimmermann, “Electron Cloud Measurements in the SPS in 2004”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP014, pp. 1371-1373.
- J. H. H. Lee, K.-J. Boller, T. Denis, and P. J. M. van der Slot, “The Design Of A Multi-Beam Electron Gun For A Photonic Free-Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPB20, pp. 427-430.
- K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
- H. A. Baldis et al., “Electron Beam and RF Characterization of a High-Brightness X-Band Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH065, pp. 2245-2247.
- D. Kipnis, E. Dyunin, and A. Gover, “Smith-Purcell Distributed Feedback Laser”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP049, pp. XX-XX.
- W.-T. Weng et al., “Comparison of Accelerator Technologies for use in ADSS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBN3, pp. 4-6.
- L. K. Len et al., “The NRL Modified Betatron Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 446-449.
- C. R. Chen et al., “The Correlation between the Beam Orbit Stability and the Utilities at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP38C, pp. 2309-2311.
- J.-C. Denard, A. Saha, and G. Lavessière, “High Accuracy Beam Current Monitor System for CEBAF's Experimental Hall A”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH103, pp. 2326-2328.
- M. Kondo, “Invited Paper: Recent Developments at the Osaka RCNP 230-cm Cyclotron and a Proposal for a New Ring Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-06, pp. 1904-1911.
- F. Hinode et al., “Commissioning of ITC-RF Gun for t-ACTS Project at Tohoku University”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA31, pp. 547-550.
- W. X. Cheng et al., “NSLS2 Diagnostic Systems Commissioning and Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOIZB1, pp. 16-23.
- J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588.
- C. P. Neuman, W. S. Graves, and P. G. O'Shea, “A Non-Interrupting Electron Beam Diagnostic using Coherent Off-Axis Undulator Radiation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA28, pp. 1949-1951.
- J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
- R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
- R. L. Poirier, I. Enchevich, T. Enegren, and S. J. Mai, “Parallel Bias vs Perpendicular Bias of a Ferrite Tuned Cavity for the TRIUMF KAON-Factory Bosster Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1321-1324.
- V. Petrillo et al., “Generation of a Train of Short Pulses by Means of FEL Emission of a Combed Electron Beam”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOICNO01, pp. 2-5.
- J. I. M. Botman, H. L. Hagedoorn, W. J. G. M, J. A. Van Der Heide, and W. Van Genderren, “Proposal for Racetrack Microtrons as Driver for a Free Electron Laser and as Injector for an Electron Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 453-456.
- H. Hsieh, R. Yourd, and M. Zisman, “Design and Construction of the PEP-II Low-Energy Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP099G, pp. 454-456.
- F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
- H. Zhu, X. C. Lou, and Q. L. Xiu, “Detector Beam Background Simulations for CEPC”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SAT2A2, pp. 184-187.
- D. E. Johnson and S. Ohnuma, “MESSYMESH - An Improved Version”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C02, pp. 119-121.
- S. Ohnuma, “Computer Programs for Particle Motion in Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 1-02, pp. 14-28.
- W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
- X. Liu, T. Adachi, S. Harada, T. Iwashita, K. Takayama, and T. Yoshimoto, “Longitudinal Beam Motion in the KEK Digital Accelerator: Tracking Simulation and Experimental Results”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO13, pp. 83-88.
Back to search