Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Liepe et al., “Design of the CW Cornell ERL Injector Cryomodule”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT094, pp. 4290-4292.
[n] L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3251-3254. doi:10.18429/JACoW-IPAC2019-WEPTS056
[n] M. Liepe, S. A. Belomestnykh, J. Dobbins, R. P. K. Kaplan, C. R. Strohman, and B. K. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT039, pp. 2592-2594.
[n] M. Goldstein et al., “FEL Applications in EUV Lithography”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA002, pp. XX-XX.
[n] N. Khosravi, E. Ahmadi, M. Akhyani, S. Dastan, and A. Khosravi, “WAKEFIELD AND HEAT LOAD STUDY OF THE GATE VALVES AT ILSF STORAGE RING”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2018-2021. doi:10.18429/JACoW-IPAC2021-TUPAB245
[n] J. Feikes, O. Dressler, and J. Kuszynski, “Kicker Pulser with High Stability for the BESSY FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF026, pp. 1654-1656.
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Surface Resistance Properties with Coaxial Resonators - Review”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 374-380. doi:10.18429/JACoW-SRF2019-TUFUB7
[n] M. Liepe et al., “Pushing the Limits: RF Field Control at High Loaded Q”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT040, pp. 2642-2644.
[n] T. Fukui et al., “The Design of the Control System for the SACLA/SPring-8 Accelerator Complex to Use the LINAC of SACLA for a Full-Energy Injector of SPring-8”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2529-2531. doi:10.18429/JACoW-IPAC2019-WEPGW029
[n] H. J. Qian et al., “Design of a 1.3 GHz Two-cell Buncher for APEX”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3924-3926. doi:10.18429/JACoW-IPAC2014-THPRI066
[n] T. Tanaka, K. Hayakawa, Y. Hayakawa, and I. Sato, “Guiding Optics System for LEBRA FEL User Facility”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS17, pp. XX-XX.
[n] M. Ries, J. Feikes, P. O. Schmid, G. Wuestefeld, and A. Hoehl, “THz Bursting Thresholds Measured at the Metrology Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR046, pp. 3030-3032.
[n] G. Liu et al., “Model Calibration of Betatron Functions and Phase in the SPring-8 Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP32, pp. 2337-2339.
[n] A. Bellandi et al., “Overview of CW R&D With a European XFEL Cryomodule”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPFAV001, pp..
[n] M. Liepe, W.-D. M?Âller, and S. N. Simrock, “Dynamic Lorentz Force Compensation with a Fast Piezoelectric Tuner”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA011, pp. XX-XX.
[n] J. Qiang, J. N. Corlett, P. Emma, C. E. Mitchell, and M. Venturini, “Simulation and Analysis of Microbunching Instability in a High Repetition rate FEL Beam Delivery System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME062, pp. 1709-1711.
[n] O. Mete, G. X. Xia, G. Burt, and S. Chattopadhyay, “Preliminary Study for an RF Photocathode based Electron Injector for AWAKE Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 717-719. doi:10.18429/JACoW-IPAC2014-MOPRI050
[n] T. Ohshima et al., “Suppression of Stored Beam Oscillation Excited by Beam Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF047, pp. 414-416.
[n] D. Prosnitz, “Millimeter High Power Sources for High Gradient Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2754-2758.
[n] G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
[n] R. B. Fiorito et al., “Beam Halo Imaging Using an Adaptive Optical Mask”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper WECNB03, pp. 543-547.
[n] K. L. F. Bane, M. Benedikt, A. Grudiev, E. Mahner, G. V. Stupakov, and U. Wienands, “Impedance Considerations for the Design of the Vacuum System of the CERN PS2 Proton Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD017, pp. 708-710.
[n] N. Solyak, J.-P. Carneiro, V. A. Lebedev, J.-F. Ostiguy, and A. Saini, “Lattice Design and Beam Dynamics Studies for Project X”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB014, pp. 876-878.
[n] N. Kumagai, H. Ohkuma, K. Soutome, M. Takao, and H. Tanaka, “Estimation of Betatron Coupling and Vertical Dispersion for SPring-8 Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP36, pp. 2349-2351.
[n] L. S. Esposito, M. Brugger, F. Cerutti, A. Ferrari, and R. Losito, “Shielding of Electronics in the Tunnel”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT4B4, pp. 157-159.
[n] D. B. Hopkins et al., “Fabrication and 35 GHz Testing of Key Two-Beam Accelerator Components”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 80-83.
[n] K. Nanbu et al., “Linear Focal Cherenkov-Ring Camera for Single Shot Observation of Longitudinal Phase Space Distribution for Non-Relativistic Electron Beam”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF26, pp. 385-388.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Liepe et al., “Design of the CW Cornell ERL Injector Cryomodule”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT094, pp. 4290-4292.
- L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3251-3254.
- M. Liepe, S. A. Belomestnykh, J. Dobbins, R. P. K. Kaplan, C. R. Strohman, and B. K. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT039, pp. 2592-2594.
- M. Goldstein et al., “FEL Applications in EUV Lithography”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOA002, pp. XX-XX.
- N. Khosravi, E. Ahmadi, M. Akhyani, S. Dastan, and A. Khosravi, “WAKEFIELD AND HEAT LOAD STUDY OF THE GATE VALVES AT ILSF STORAGE RING”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2018-2021.
- J. Feikes, O. Dressler, and J. Kuszynski, “Kicker Pulser with High Stability for the BESSY FEL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF026, pp. 1654-1656.
- H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Surface Resistance Properties with Coaxial Resonators - Review”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 374-380.
- M. Liepe et al., “Pushing the Limits: RF Field Control at High Loaded Q”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT040, pp. 2642-2644.
- T. Fukui et al., “The Design of the Control System for the SACLA/SPring-8 Accelerator Complex to Use the LINAC of SACLA for a Full-Energy Injector of SPring-8”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2529-2531.
- H. J. Qian et al., “Design of a 1.3 GHz Two-cell Buncher for APEX”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3924-3926.
- T. Tanaka, K. Hayakawa, Y. Hayakawa, and I. Sato, “Guiding Optics System for LEBRA FEL User Facility”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS17, pp. XX-XX.
- M. Ries, J. Feikes, P. O. Schmid, G. Wuestefeld, and A. Hoehl, “THz Bursting Thresholds Measured at the Metrology Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR046, pp. 3030-3032.
- G. Liu et al., “Model Calibration of Betatron Functions and Phase in the SPring-8 Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP32, pp. 2337-2339.
- A. Bellandi et al., “Overview of CW R&D With a European XFEL Cryomodule”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPFAV001, pp..
- M. Liepe, W.-D. M?Âller, and S. N. Simrock, “Dynamic Lorentz Force Compensation with a Fast Piezoelectric Tuner”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper SA011, pp. XX-XX.
- J. Qiang, J. N. Corlett, P. Emma, C. E. Mitchell, and M. Venturini, “Simulation and Analysis of Microbunching Instability in a High Repetition rate FEL Beam Delivery System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME062, pp. 1709-1711.
- O. Mete, G. X. Xia, G. Burt, and S. Chattopadhyay, “Preliminary Study for an RF Photocathode based Electron Injector for AWAKE Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 717-719.
- T. Ohshima et al., “Suppression of Stored Beam Oscillation Excited by Beam Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF047, pp. 414-416.
- D. Prosnitz, “Millimeter High Power Sources for High Gradient Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2754-2758.
- G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
- R. B. Fiorito et al., “Beam Halo Imaging Using an Adaptive Optical Mask”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper WECNB03, pp. 543-547.
- K. L. F. Bane, M. Benedikt, A. Grudiev, E. Mahner, G. V. Stupakov, and U. Wienands, “Impedance Considerations for the Design of the Vacuum System of the CERN PS2 Proton Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD017, pp. 708-710.
- N. Solyak, J.-P. Carneiro, V. A. Lebedev, J.-F. Ostiguy, and A. Saini, “Lattice Design and Beam Dynamics Studies for Project X”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB014, pp. 876-878.
- N. Kumagai, H. Ohkuma, K. Soutome, M. Takao, and H. Tanaka, “Estimation of Betatron Coupling and Vertical Dispersion for SPring-8 Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP36, pp. 2349-2351.
- L. S. Esposito, M. Brugger, F. Cerutti, A. Ferrari, and R. Losito, “Shielding of Electronics in the Tunnel”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT4B4, pp. 157-159.
- D. B. Hopkins et al., “Fabrication and 35 GHz Testing of Key Two-Beam Accelerator Components”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 80-83.
- K. Nanbu et al., “Linear Focal Cherenkov-Ring Camera for Single Shot Observation of Longitudinal Phase Space Distribution for Non-Relativistic Electron Beam”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF26, pp. 385-388.
Back to search
