Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Liakin, “The Analysis of the Electron Beam Scanning Method for the Beam Profile Monitoring.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT099, pp. 2721-2723.
[n] M. Bousonville, C. Christou, P. Hülsmann, S. Karau, and S. Vilcins, “Realisation of a 1.5 GHz single mode cavity for PETRA IV”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB086, unpublished.
[n] T. Hellert et al., “Status of the Advanced Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1309-1312. doi:10.18429/JACoW-IPAC2024-TUPG37
[n] Y. Yang et al., “A high brightness electron beam research and application beamline at Tsinghua University”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2093-2096. doi:10.18429/JACoW-IPAC2023-TUPL152
[n] J. A. MacLachlan, “400 MeV Upgrade for the Fermilab Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 950-953.
[n] V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “Trim Power Supplies for the Duke Booster and Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE074, pp. 3919-3921.
[n] E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, and F. Toral, “Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR016, pp. 1843-1845.
[n] P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
[n] D. E. Kim, C. W. Chung, I. S. Ko, J.-S. Oh, and K.-H. Park, “Physics Requirement of a PLS-XFEL Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS132, pp. 3592-3594.
[n] J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110.
[n] J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
[n] Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished.
[n] G. R. Werner et al., “Voltage Breakdown on Niobium and Copper Surfaces”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper MA005, pp. XX-XX.
[n] T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
[n] K. L. F. Bane, C. Adolphsen, and C. D. Nantista, “RF Distribution Optimization in the Main Linacs of the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS037, pp. 2424-2426.
[n] K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706.
[n] R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
[n] O. Makarov, B. Deriy, L. Emery, S. Sasaki, R. Soliday, and I. Vasserman, “Feedforward Correction of the Pulsed Circularly Polarizing Undulator at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG001, pp. 2261-2263.
[n] Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
[n] Q. Wu, L. T. Sun, and H. W. Zhao, “Development of 2.45 GHz ECR Ion Source at IMP”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 195-197. doi:10.18429/JACoW-ECRIS2018-THC1
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 1-4. doi:10.18429/JACoW-ERL2019-MOCOXBS02
[n] H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
[n] V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “3 kA Power Supplies for the Duke OK-5 FEL Wigglers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE073, pp. 3901-3903.
[n] C. D. Marshall et al., “National Ignition Facility Control and Information System Operational Tools”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUA003, pp. 52-54.
[n] L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3848-3851. doi:10.18429/JACoW-IPAC2018-THPAL084
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Liakin, “The Analysis of the Electron Beam Scanning Method for the Beam Profile Monitoring.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT099, pp. 2721-2723.
- M. Bousonville, C. Christou, P. Hülsmann, S. Karau, and S. Vilcins, “Realisation of a 1.5 GHz single mode cavity for PETRA IV”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB086, this conference.
- T. Hellert et al., “Status of the Advanced Light Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG37, pp. 1309-1312.
- Y. Yang et al., “A high brightness electron beam research and application beamline at Tsinghua University”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL152, pp. 2093-2096.
- J. A. MacLachlan, “400 MeV Upgrade for the Fermilab Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 950-953.
- V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “Trim Power Supplies for the Duke Booster and Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE074, pp. 3919-3921.
- E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, and F. Toral, “Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR016, pp. 1843-1845.
- P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
- D. E. Kim, C. W. Chung, I. S. Ko, J.-S. Oh, and K.-H. Park, “Physics Requirement of a PLS-XFEL Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS132, pp. 3592-3594.
- J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1107-1110.
- J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
- Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished.
- G. R. Werner et al., “Voltage Breakdown on Niobium and Copper Surfaces”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper MA005, pp. XX-XX.
- T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
- K. L. F. Bane, C. Adolphsen, and C. D. Nantista, “RF Distribution Optimization in the Main Linacs of the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS037, pp. 2424-2426.
- K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706.
- R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
- O. Makarov, B. Deriy, L. Emery, S. Sasaki, R. Soliday, and I. Vasserman, “Feedforward Correction of the Pulsed Circularly Polarizing Undulator at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG001, pp. 2261-2263.
- Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
- Q. Wu, L. T. Sun, and H. W. Zhao, “Development of 2.45 GHz ECR Ion Source at IMP”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 195-197.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 1-4.
- H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
- V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “3 kA Power Supplies for the Duke OK-5 FEL Wigglers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE073, pp. 3901-3903.
- C. D. Marshall et al., “National Ignition Facility Control and Information System Operational Tools”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUA003, pp. 52-54.
- L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3848-3851.
Back to search