JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192. 
[n]	G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n]	S. M. Hanna, “Characterization Techniques for X-Band Medical Accelerator Structures”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1B07, pp. 2521-2523. 
[n]	A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197. 
[n]	L. Garc?¡a-Tabar?®s, P. Abramian, J. Calero, F. Toral, A. Ijspeert, and J. C. P?®rez, “Dimensional Metrology of Cylinders Based on Digital Image Processing: Application to LHC Corrector Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE003, pp. 2394-2396. 
[n]	M. Pezzetti, V. Inglese, A. Tovar, M. M. Almeida, and H. Coppier, “A Fuzzy-Oriented Solution for Automatic Distribution of Limited Resources According to Priority Lists”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC077, pp. 1246-1249. 
[n]	E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 19, pp. 126-128. 
[n]	G. W. Bennett, “Insulated Target Instrumentation for the AGS Slow External Beam”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 637-640. 
[n]	B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n]	B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11. 
[n]	M. Magrans de Abril, Q. King, and R. Murillo-Garcia, “The Phase-Locked Loop Algorithm of the Function Generation/Controller”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 624-628. doi:10.18429/JACoW-ICALEPCS2015-WEC3O02
[n]	J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4026-4027. doi:10.18429/JACoW-IPAC2017-THPAB129
[n]	C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n]	G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1905-1908. 
[n]	T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 126-129. 
[n]	A. Sery, “Ground Motion Studies with respect to Linac Performance”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH205, pp. 621-625. 
[n]	R. Salemme, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Vacuum Performance of Amorphous Carbon Coating at Cryogenic Temperature with Presence of Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3663-3666. doi:10.18429/JACoW-IPAC2016-THPMY007
[n]	Z. Mart?¡, J. Campmany, J. Marcos, V. Massana, and X. N. Gavald?á, “Detailed Characterization of ALBA Quadrupoles for Beta Function Determination”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 338-340. doi:10.18429/JACoW-IPAC2015-MOPJE028
[n]	R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 760-764. 
[n]	E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 22-25. doi:10.18429/JACoW-ICALEPCS2015-MOC3O02
[n]	G. Maire, A. Kehrli, M. Pezzetti, S. Ravat, B. Charnier, and H. Coppier, “Evaluation and Implementation of Advanced Process Control with the compactRIO Material of National Instrument”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC125, pp. 1355-1358. 
[n]	J. Rossbach, “Short Wavelength SASE FEL: Experiment vs. Theory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZBAB02, pp. 94-98. 
[n]	K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514. 
[n]	K. Hanke et al., “Status of the Upgrade of the CERN PS Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO078, pp. 3939-3941. 
[n]	W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320. 
[n]	R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312. 
[n]	W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174. 
[n]	L. M. Bollinger and K. W. Shepard, “Concept of a Superconducting Linac for Low-Velocity Ions”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEQ0001, pp. 217-219. 
[n]	N. Il, S. Bragin, and P. Reinhardt-Nickoulin, “The Transients in Linac and the Beam Fast Measuring System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1708-1711. 
[n]	A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 251-254. doi:10.18429/JACoW-ICALEPCS2015-MOPGF070
[n]	A. Latina et al., “Electron Cooling Simulation and Experimental Benchmarks at LEIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 776-779. doi:10.18429/JACoW-IPAC2018-TUPAF039
[n]	D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683. 
[n]	J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441. 
[n]	E. B. Blanco Vinuela, B. Fernandez Adiego, and A. Merezhin, “Testing and Verification of PLC Code for Process Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC080, pp. 1258-1261. 
[n]	A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX. 
[n]	B. Hounsell and J. McKenzie, “Beam dynamics of the RUEDI diffraction beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2079-2082. doi:10.18429/JACoW-IPAC2023-TUPL145
[n]	E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124. 
[n]	A. Shemyakin et al., “Test of a Full-Scale Prototype of the Fermilab Electron Cooler”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16013, pp. XX-XX. 
[n]	S. Blanchard et al., “The New Control Software for the CERN NA62 Beam Vacuum”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 314-317. doi:10.18429/JACoW-ICALEPCS2015-MOPGF102
[n]	A. Burov et al., “Optics of the Fermilab Electron Cooler”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16039, pp. XX-XX. 
[n]	N. F. Ziegler, “Accelerating Cavities for an 800-MeV SOC”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 128-133. 
[n]	C. E. Adolphsen et al., “Beam-Based Alignment Technique for the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 977-980. 
[n]	F. Mateo et al., “The Upgrade of Control Hardware of the CERN NA62 Beam Vacuum”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 318-321. doi:10.18429/JACoW-ICALEPCS2015-MOPGF103
[n]	N. Dobeck, G. Burtner, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-30, pp. 382-384. 
[n]	N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220. 
[n]	C. Wiesner et al., “Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2418-2421. doi:10.18429/JACoW-IPAC2019-WEPMP040
[n]	A. C. Crawford, S. Nagaitsev, A. Sharapa, and A. Shemyakin, “Successful MeV-Range Electron Beam Recirculation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP08C, pp. 1049-1051. 
[n]	N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3304-3307. 
[n]	O. Grimm, J. Feldhaus, J. Rossbach, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “The Infrared Undulator Project at the VUV-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP055, pp. XX-XX. 
[n]	D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440. 
[n]	J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n]	T. Tajima et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP11, pp. 57-59. 
[n]	D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393. 
[n]	G. Bachy, “Design, Installation Problems and Criteria Related to Large Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1579-1582. 
[n]	V. N. Alferov et al., “The UNK Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1356-1359. 
[n]	C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060. 
[n]	W. C. Sellyey, J. D. Gilpatrick, P. S. Marroquin, and M. E. Gruchalla, “Experience with Photomultiplier Based Beam Loss Monitors (PMBLM) at the Low Energy Demonstration Accelerator (LEDA)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH042, pp. 1315-1317. 
[n]	N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4859-4862. doi:10.18429/JACoW-IPAC2023-THPL172
[n]	K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150. 
[n]	R. F. Koontz, “CID Thermionic Gun System”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B10, pp. 62-64. 
[n]	K. R. Crandall, “Transverse Beam Matching Using Wire Scanners”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C01, pp. 51-53. 
[n]	J. H. Li et al., “The Conceptual Design of the China White Neutron Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2127-2130. doi:10.18429/JACoW-IPAC2014-WEPRO075
[n]	R. W. Garnett, T. S. Bhatia, G. H. Neuschaefer, and J. M. Watson, “A Comparison of Beam-Dynamics Solutions for the SSC 1284-MHz Coupled Cavity Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU415, pp. 341-343. 
[n]	W. Booth, E. B. Blanco Vinuela, B. Bradu, L. Gomez Palacin, M. Quilichini, and D. Willeman, “Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC076, pp. 1242-1245. 
[n]	S. Blanchard et al., “The UNICOS-CPC Vacuum Controls Package”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1370-1373. doi:10.18429/JACoW-ICALEPCS2017-THPHA016
[n]	L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311. 
[n]	R. F. Koontz, “A New Injector (NPI) for Nuclear Physics at SLAC”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0039, pp. 198-199. 
[n]	D. Regidor et al., “IFMIF-EVEDA SRF Linac Couplers Test Bench”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO043, pp. 2396-2398. 
[n]	B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 743-746. doi:10.18429/JACoW-LINAC2022-THPOJO26
[n]	E. Van der Bij et al., “Open Hardware for CERN's Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAULT04, pp. 554-557. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search