Favourites
For Word
[n] H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “A Local Achromatic Design of C-ADS MEBT2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO019, pp. 1922-1924.
[n] Y. Jongen et al., “Center Region Design Of The Cyclotron C400 For Hadron Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 394-396.
[n] M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
[n] H. Dowell, “Compensation of Bend-Plane Emittance Growth in a 180 Degree Bend”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8V022, pp. 1888-1890.
[n] C. Bate et al., “Nitrogen Infusion Sample R&D at DESY”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 77-82. doi:10.18429/JACoW-SRF2019-MOP023
[n] A. Dubrovin, “Time Stepping Klystron and Lasertron Simulations”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1050-1053.
[n] J. F. Gournay, “Quench Data Acquisition and Slow Control for the Superconducting Magnet of the COMPASS Experiment”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_051.
[n] G. M. Kazakevich et al., “Bunch Length Monitoring at the A0 Photoinjector Using a Quasi-Optical Schottky Detector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP042, pp. 3543-3545.
[n] P. K. Saha, H. Hotchi, Y. Irie, S. Machida, and F. Noda, “Updated Simulation for the Nuclear Scattering Loss Estimation at the RCS Injection Area”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN061, pp. 1526-1528.
[n] R. P. Fliller and T. W. Koeth, “Emittance Exchange Results”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4PBI01, pp. 773-777.
[n] S. Schreiber, Ch. Gerth, K. Honkavaara, and P. Piot, “Electron Bunch Shape Measurements at the TTF-FEL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB040, pp. 911-913.
[n] V. Porshyn, D. L??tzenkirchen-Hecht, P. Serbun, H. B??rger, and S. Soykarci, “Laser Treatment of Niobium Surface for SRF Aplications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2387-2390. doi:10.18429/JACoW-IPAC2018-WEPMF010
[n] B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
[n] D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
[n] M. Sch??tt, U. Ratzinger, and R. M. Brodhage, “Development of a 325 MHz Ladder-RFQ of the 4-Rod Type”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3745-3747. doi:10.18429/JACoW-IPAC2015-THPF026
[n] T. Hellert and Ch. Schmidt, “Progress on Multibunch FEL Performance at FLASH”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1452-1455. doi:10.18429/JACoW-IPAC2018-TUPMF080
[n] S. Penner, “CW Electron Accelerators for Nuclear Physics”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2067-2074.
[n] L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 227-230. doi:10.18429/JACoW-SRF2017-MOPB072
[n] F. Z. Hsiao et al., “Investigation of Moisture Contamination in the Cryogenic System at NSRRC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2762-2764. doi:10.18429/JACoW-IPAC2014-WEPRI111
[n] C. Thongbai et al., “Design and Construction of Compact Electromagnetic Undulator for THz Radiation Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4060-4062. doi:10.18429/JACoW-IPAC2016-THPOW051
[n] S. Redaelli, R. W. Assmann, M. Donze, R. Losito, and A. Masi, “LHC Collimator Controls for a Safe LHC Operation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU020, pp. 1104-1107.
[n] Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
[n] V. Guidi et al., “Characterization of Crystals for Steering of Protons through Channelling in Hadronic Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS016, pp. 1523-1525.
[n] M. A. Gundersen, V. Dominic, W. Hartmann, and G. Kirkman, “Studies of Fundamental Processes in High Power Switches”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1123-1126.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “A Local Achromatic Design of C-ADS MEBT2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO019, pp. 1922-1924.
- Y. Jongen et al., “Center Region Design Of The Cyclotron C400 For Hadron Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 394-396.
- M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
- H. Dowell, “Compensation of Bend-Plane Emittance Growth in a 180 Degree Bend”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8V022, pp. 1888-1890.
- C. Bate et al., “Nitrogen Infusion Sample R&D at DESY”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 77-82.
- A. Dubrovin, “Time Stepping Klystron and Lasertron Simulations”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1050-1053.
- J. F. Gournay, “Quench Data Acquisition and Slow Control for the Superconducting Magnet of the COMPASS Experiment”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_051.
- G. M. Kazakevich et al., “Bunch Length Monitoring at the A0 Photoinjector Using a Quasi-Optical Schottky Detector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP042, pp. 3543-3545.
- P. K. Saha, H. Hotchi, Y. Irie, S. Machida, and F. Noda, “Updated Simulation for the Nuclear Scattering Loss Estimation at the RCS Injection Area”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN061, pp. 1526-1528.
- R. P. Fliller and T. W. Koeth, “Emittance Exchange Results”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4PBI01, pp. 773-777.
- S. Schreiber, Ch. Gerth, K. Honkavaara, and P. Piot, “Electron Bunch Shape Measurements at the TTF-FEL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB040, pp. 911-913.
- V. Porshyn, D. L??tzenkirchen-Hecht, P. Serbun, H. B??rger, and S. Soykarci, “Laser Treatment of Niobium Surface for SRF Aplications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2387-2390.
- B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
- D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3995-3997.
- M. Sch??tt, U. Ratzinger, and R. M. Brodhage, “Development of a 325 MHz Ladder-RFQ of the 4-Rod Type”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3745-3747.
- T. Hellert and Ch. Schmidt, “Progress on Multibunch FEL Performance at FLASH”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1452-1455.
- S. Penner, “CW Electron Accelerators for Nuclear Physics”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2067-2074.
- L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 227-230.
- F. Z. Hsiao et al., “Investigation of Moisture Contamination in the Cryogenic System at NSRRC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2762-2764.
- C. Thongbai et al., “Design and Construction of Compact Electromagnetic Undulator for THz Radiation Production”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4060-4062.
- S. Redaelli, R. W. Assmann, M. Donze, R. Losito, and A. Masi, “LHC Collimator Controls for a Safe LHC Operation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU020, pp. 1104-1107.
- Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
- V. Guidi et al., “Characterization of Crystals for Steering of Protons through Channelling in Hadronic Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS016, pp. 1523-1525.
- M. A. Gundersen, V. Dominic, W. Hartmann, and G. Kirkman, “Studies of Fundamental Processes in High Power Switches”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1123-1126.
Back to search