Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. I. Silvestrov, A. N. Skrinsky, and T. A. Vsevolozhskaya, “Final Stage of Muon Beam Cooling”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP60, pp. 3089-3091.
[n] G. Bellomo, L. Serafini, and F. G. Resmini, “Design of the Axial Injection Optics for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B37, pp. 150-153.
[n] B. Feinberg and I. G. Brown, “The Superhilac Heavy Ion Intensity Upgrade”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 860-863.
[n] R. Hanft et al., “Magnetic Field Properties of Fermilab Energy Saver Dipoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3381-3384.
[n] E. Cenni, M. Baudrier, G. Devanz, L. Maurice, O. Piquet, and D. Roudier, “Field Emission Studies on ESS Elliptical Prototype Cavities at CEA Saclay”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1147-1151. doi:10.18429/JACoW-SRF2019-THP097
[n] R. Bacher, “Renovating and Upgrading the Web2cToolkit Suite: A Status Report”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FCO201, pp. 231-233.
[n] A. A. Fakhri and G. Singh, “A Hamiltonian for Wave Length Shifter and its Studies on INDUS-1”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA060, pp. 199-201.
[n] T. Xu, C. J. R. Duncan, P. Denham, P. Musumeci, and R. England, “Focusing of relativistic electron beams with permanent magnetic solenoids”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEAN01, unpublished.
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n] C. Steier et al., “Status of the Low Emittance Upgrade of the Advanced Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA070, pp. 2645-2647.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] V. Prasad, D. Barapatre, M. Jagannath, R. K. Sahu, K. P. Sharma, and G. Singh, “Precise Survey and Alignment of Synchrotron Radiation Source Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA086, pp. 761-763.
[n] B. Feinberg and I. G. Brown, “The SuperHILAC Upgrade Project”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-9, pp. 263-265.
[n] S. Schreiber, C. Gr??n, K. Klose, J. R?Ânsch-Schulenburg, and B. Steffen, “FLASH Photoinjector Laser Systems”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 430-433. doi:10.18429/JACoW-FEL2019-WEP048
[n] V. Servranckx, “Program DIMAD: Vectorization, links with DA, LIELIB and COSY-[infinity]”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 287-288.
[n] T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2876-2878. doi:10.18429/JACoW-IPAC2015-WEPMA048
[n] R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171.
[n] F. Cilyo, J. McCarthy, and B. Wisner, “Magnet Current Bypass Shunt”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3757-3760.
[n] J. Sun et al., “Longitudinal Feedback System for Suppression of FEL Lasing Drift at Dalian Coherent Light Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL008, unpublished.
[n] M. Busch, F. D. Dziuba, H. Podlech, and U. Ratzinger, “Progress in Superconducting CH-Cavity Development”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO016, pp. 574-577.
[n] E. Cenni et al., “ESS Prototype Cavities Developed at CEA Saclay”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1143-1146. doi:10.18429/JACoW-SRF2019-THP096
[n] S. Chouksey et al., “Installation and Integration of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA096, pp. 782-784.
[n] T. P. Wangler, A. Cimabue, J. Merson, R. S. Mills, R. Wood, and L. M. Young, “Superconducting RFQ Development at Los Alamos”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-09, pp. 627-629.
[n] G. S. Bauer, W. E. Fischer, U. Rohrer, and U. Schryber, “Commissioning of the 1 MW Spallation Neutron Source SINQ”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B004, pp. 3785-3787.
[n] K. Balewski et al., “Preliminary Study of Electron Cooling Possibility of Hadronic Beams at PETRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP36G, pp. 1079-1081.
[n] V. Senichev et al., “Quasi-Frozen Spin Concept of Deuteron Storage Ring as an Instrument to Search for the Electric Dipole Moment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2275-2277. doi:10.18429/JACoW-IPAC2017-TUPVA084
[n] P. Forck and C. Dorn, “Measurements with a Novel Non-Intercepting Bunch Shape Monitor at the High Current GSI-LINAC”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM010, pp. XX-XX.
[n] J. D. Sherman, “High-Current Proton and Deuterium Extraction Systems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS080, pp. 1835-1837.
[n] A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73.
[n] H. H?ñhnel, U. Ratzinger, and R. Tiede, “Efficient Heavy Ion Acceleration with IH-Type Cavities for High Current Machines in the Energy Range up to 11.4 MeV/u”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 616-618. doi:10.18429/JACoW-LINAC2016-TUPLR070
For LaTeX
Use Complete Form
For BibTeX
References
- G. I. Silvestrov, A. N. Skrinsky, and T. A. Vsevolozhskaya, “Final Stage of Muon Beam Cooling”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP60, pp. 3089-3091.
- G. Bellomo, L. Serafini, and F. G. Resmini, “Design of the Axial Injection Optics for the Milan Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B37, pp. 150-153.
- B. Feinberg and I. G. Brown, “The Superhilac Heavy Ion Intensity Upgrade”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 860-863.
- R. Hanft et al., “Magnetic Field Properties of Fermilab Energy Saver Dipoles”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3381-3384.
- E. Cenni, M. Baudrier, G. Devanz, L. Maurice, O. Piquet, and D. Roudier, “Field Emission Studies on ESS Elliptical Prototype Cavities at CEA Saclay”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1147-1151.
- R. Bacher, “Renovating and Upgrading the Web2cToolkit Suite: A Status Report”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FCO201, pp. 231-233.
- A. A. Fakhri and G. Singh, “A Hamiltonian for Wave Length Shifter and its Studies on INDUS-1”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA060, pp. 199-201.
- T. Xu, C. J. R. Duncan, P. Denham, P. Musumeci, and R. England, “Focusing of relativistic electron beams with permanent magnetic solenoids”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEAN01, unpublished.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
- C. Steier et al., “Status of the Low Emittance Upgrade of the Advanced Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA070, pp. 2645-2647.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- V. Prasad, D. Barapatre, M. Jagannath, R. K. Sahu, K. P. Sharma, and G. Singh, “Precise Survey and Alignment of Synchrotron Radiation Source Indus-2”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA086, pp. 761-763.
- B. Feinberg and I. G. Brown, “The SuperHILAC Upgrade Project”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-9, pp. 263-265.
- S. Schreiber, C. Gr??n, K. Klose, J. R?Ânsch-Schulenburg, and B. Steffen, “FLASH Photoinjector Laser Systems”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 430-433.
- V. Servranckx, “Program DIMAD: Vectorization, links with DA, LIELIB and COSY-[infinity]”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 287-288.
- T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2876-2878.
- R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171.
- F. Cilyo, J. McCarthy, and B. Wisner, “Magnet Current Bypass Shunt”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3757-3760.
- J. Sun et al., “Longitudinal Feedback System for Suppression of FEL Lasing Drift at Dalian Coherent Light Source”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL008, unpublished.
- M. Busch, F. D. Dziuba, H. Podlech, and U. Ratzinger, “Progress in Superconducting CH-Cavity Development”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO016, pp. 574-577.
- E. Cenni et al., “ESS Prototype Cavities Developed at CEA Saclay”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1143-1146.
- S. Chouksey et al., “Installation and Integration of Indus-2”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA096, pp. 782-784.
- T. P. Wangler, A. Cimabue, J. Merson, R. S. Mills, R. Wood, and L. M. Young, “Superconducting RFQ Development at Los Alamos”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-09, pp. 627-629.
- G. S. Bauer, W. E. Fischer, U. Rohrer, and U. Schryber, “Commissioning of the 1 MW Spallation Neutron Source SINQ”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9B004, pp. 3785-3787.
- K. Balewski et al., “Preliminary Study of Electron Cooling Possibility of Hadronic Beams at PETRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP36G, pp. 1079-1081.
- V. Senichev et al., “Quasi-Frozen Spin Concept of Deuteron Storage Ring as an Instrument to Search for the Electric Dipole Moment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2275-2277.
- P. Forck and C. Dorn, “Measurements with a Novel Non-Intercepting Bunch Shape Monitor at the High Current GSI-LINAC”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM010, pp. XX-XX.
- J. D. Sherman, “High-Current Proton and Deuterium Extraction Systems”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS080, pp. 1835-1837.
- A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73.
- H. H?ñhnel, U. Ratzinger, and R. Tiede, “Efficient Heavy Ion Acceleration with IH-Type Cavities for High Current Machines in the Energy Range up to 11.4 MeV/u”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 616-618.
Back to search