Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Li, “Study of the microbunching instability in the THz FEL at PITZ”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM105, unpublished.
[n] I. Ben-Zvi et al., “Electron Cooling of RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP043, pp. 2741-2743.
[n] J.-L. Mi et al., “SNS Extraction Kicker System and First Article BPFN Test”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE068, pp. 2652-2654.
[n] M. X. Fan et al., “Multipacting Studies of the Coaxial Coupler for BNCT DTL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2921-2924. doi:10.18429/JACoW-IPAC2019-WEPRB050
[n] H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708.
[n] J.-L. Mi et al., “SNS Extraction Kicker Power Supply Manufacture Status”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT188, pp. 1571-1573.
[n] H. Hahn, A. Dunbar, C. I. Pai, R. T. Sanders, N. Tsoupas, and J. E. Tuozzolo, “The RHIC Beam Abort Kicker System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA14, pp. 1100-1102.
[n] T. Rao et al., “Photoemission Studies on BNL/AES/JLab all Niobium, Superconducting RF Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP038, pp. 2556-2558.
[n] D. S. Barton et al., “STATUS OF HIGH CURRENT R&D ENERGY RECOVERY LINAC AT BROOKHAVEN NATIONAL LABORATORY”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper TUFO03, pp. XX-XX.
[n] H. Hahn, “Optimization of Alternating-Periodic Iris-Loaded Deflectors for Superconducting RF Beam Separators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-7, pp. 523-532.
[n] H. Hahn and H. J. Halama, “Q-Measurements of Superconducting Cavities at 2.868 GHz”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-8, pp. 774-774.
[n] H. Hahn, “The Coupling Impedance of Toroidal Beam Pipe with Circular Cross Section”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ02, pp. 2952-2954.
[n] S. Bielawski et al., “High Repetition-Rate Electro-optic Sampling: Recent Studies Using Photonic Time-Stretch”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 121-124. doi:10.18429/JACoW-IBIC2017-TU1AB2
[n] J.-B. Lagrange, “The Particle Tracking Code Fixfield”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1905-1906. doi:10.18429/JACoW-IPAC2021-TUPAB209
[n] T. Xin et al., “Measuring the Electrical Center and Field Flatness of 704 MHz Deflecting Cavity for LEReC with Wire Stretching System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1320-1322. doi:10.18429/JACoW-IPAC2018-TUPMF034
[n] D. Kelliher et al., “Adiabatic capture in the FETS-FFA ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2265-2268. doi:10.18429/JACoW-IPAC2023-TUPM033
[n] X. Liu, Y. Jiao, B. Li, and S. Wang, “Preliminary design of the Full Energy Linac Injector for the Southern Advanced Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1454-1457. doi:10.18429/JACoW-IPAC2021-TUPAB046
[n] J. Li, Z. Guo, X. Xu, H. Zhang, B. Li, and Z. He, “Research on spatial alignment of laser and electron beam in the generation of ultra-short electron pulses by laser modulation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 866-869. doi:10.18429/JACoW-IPAC2024-MOPS63
[n] A. Liu, A. D. Bross, and J.-B. Lagrange, “nuPIL - Neutrinos from a PIon Beam Line”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 739-741. doi:10.18429/JACoW-NAPAC2016-WEPOA22
[n] O. Capatina et al., “CERN Developments for 704 MHz Superconducting Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOB04, pp. 1198-1211.
[n] H. Hahn et al., “Ferrite Covered Ceramic Break HOM Damper”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP055, pp. 1040-1042.
[n] L. Calabretta et al., “New Design Issues of the EXCYT Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP038G, pp. 864-866.
[n] J.-B. Lagrange and Y. Mori, “Advanced FFAG Optics, Design and Experiment”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO4PB03, pp. 120-124.
[n] Y. Jiao et al., “Progress of Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 229-232. doi:10.18429/JACoW-IPAC2021-MOPAB053
[n] M. E. Topp-Mugglestone, J.-B. Lagrange, S. Machida, and S. L. Sheehy, “First Order Analytic Approaches to Modelling the Vertical Excursion Fixed Field Alternating Gradient Accelerator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4262-4265. doi:10.18429/JACoW-IPAC2021-THPAB236
[n] C. Pai et al., “Construction and Power Test of the Extraction Kicker Magnet for the Spallation Neutron Source Accumulator Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT070, pp. 3831-3833.
[n] S. Seletskiy et al., “Conceptual Design of LEReC Fast Machine Protection System”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 665-668. doi:10.18429/JACoW-IBIC2016-WEPG19
[n] C. Pai et al., “Mechanical Design of Fast Extraction Kicker and PFN for SNS Accumulator Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB049, pp. 2147-2149.
[n] J. Sauza-Bedolla, S. Atieh, and N. Catalan-Lasheras, “Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 374-376. doi:10.18429/JACoW-LINAC2018-TUPO022
[n] A. T. Wu et al., “Surface Treatments of Nb by Buffered Electropolishing”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO064, pp. 755-759.
[n] R. Busby et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP081, pp. 4497-4499.
[n] M. D. Cole et al., “RF Design and Operating Performance of the BNL/AES 1.3 GHz Single Cell Superconducting RF Photocathode Electron Gun”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE061, pp. 3514-3516.
[n] H. Hahn, “The Relativistic Heavy Ion Collider at Brookhaven”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 109-112.
[n] K. Beckert et al., “Operation of the ESR at Transition Energy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03A, pp. 511-513.
[n] N. Hiller et al., “Single-Shot Electro-Optical Diagnostics at the ANKA Storage Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD17, pp. 182-186.
[n] J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 11, pp. 95-98.
[n] A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
[n] X. Liang et al., “Preparation and Investigation of Antimony Thin Films for Multi-Alkali Photocathodes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC12, pp. 1163-1165.
[n] E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069.
[n] A. M. M. Todd et al., “State-of-the-Art Electron Guns and Injector Designs for Energy Recovery Linacs (ERL)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP033, pp. 2292-2294.
[n] C. Xu et al., “Input RF Coupler Design for Energy Compensator Cavity in eRHIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1184-1186. doi:10.18429/JACoW-IPAC2017-MOPVA141
[n] V. Schoefer et al., “RHIC Polarized Proton-Proton Operation at 100 GeV in Run 15”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2384-2386. doi:10.18429/JACoW-IPAC2015-TUPWI060
[n] F. Severino, M. Harvey, T. Hayes, G. Narayan, and K. S. Smith, “Distributed Feedback Loop Implementation in the RHIC Low Level RF Platform”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOBAB05, pp. 1501-1504.
[n] Y. Ishi et al., “Present Status and Future of FFAGs at KURRI and the First ADSR Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCRA03, pp. 1327-1329.
[n] E. Wang, I. Ben-Zvi, and J. Wang, “Characterization of an SRF Gun: A 3D Full Wave Simulation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP046, pp. 2205-2207.
[n] S. A. Belomestnykh et al., “SRF and RF Systems for CeC PoP Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO06, pp. 1310-1312.
[n] V. Litvinenko et al., “Status of R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS076, pp. 1347-1349.
[n] E. Wang et al., “Progress on Growth of a Multi-alkali Photocathode for ERL”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC18, pp. 1181-1183.
[n] Z. Geng, B. Hong, K. H. Kim, R. S. Larsen, D. Van Winkle, and C. Xu, “LLRF System for LCLS-II at SLAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA060, pp. 3276-3278.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Li, “Study of the microbunching instability in the THz FEL at PITZ”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM105, unpublished.
- I. Ben-Zvi et al., “Electron Cooling of RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP043, pp. 2741-2743.
- J.-L. Mi et al., “SNS Extraction Kicker System and First Article BPFN Test”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE068, pp. 2652-2654.
- M. X. Fan et al., “Multipacting Studies of the Coaxial Coupler for BNCT DTL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2921-2924.
- H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708.
- J.-L. Mi et al., “SNS Extraction Kicker Power Supply Manufacture Status”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT188, pp. 1571-1573.
- H. Hahn, A. Dunbar, C. I. Pai, R. T. Sanders, N. Tsoupas, and J. E. Tuozzolo, “The RHIC Beam Abort Kicker System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA14, pp. 1100-1102.
- T. Rao et al., “Photoemission Studies on BNL/AES/JLab all Niobium, Superconducting RF Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP038, pp. 2556-2558.
- D. S. Barton et al., “STATUS OF HIGH CURRENT R&D ENERGY RECOVERY LINAC AT BROOKHAVEN NATIONAL LABORATORY”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper TUFO03, pp. XX-XX.
- H. Hahn, “Optimization of Alternating-Periodic Iris-Loaded Deflectors for Superconducting RF Beam Separators”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-7, pp. 523-532.
- H. Hahn and H. J. Halama, “Q-Measurements of Superconducting Cavities at 2.868 GHz”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-8, pp. 774-774.
- H. Hahn, “The Coupling Impedance of Toroidal Beam Pipe with Circular Cross Section”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ02, pp. 2952-2954.
- S. Bielawski et al., “High Repetition-Rate Electro-optic Sampling: Recent Studies Using Photonic Time-Stretch”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 121-124.
- J.-B. Lagrange, “The Particle Tracking Code Fixfield”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1905-1906.
- T. Xin et al., “Measuring the Electrical Center and Field Flatness of 704 MHz Deflecting Cavity for LEReC with Wire Stretching System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1320-1322.
- D. Kelliher et al., “Adiabatic capture in the FETS-FFA ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM033, pp. 2265-2268.
- X. Liu, Y. Jiao, B. Li, and S. Wang, “Preliminary design of the Full Energy Linac Injector for the Southern Advanced Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1454-1457.
- J. Li, Z. Guo, X. Xu, H. Zhang, B. Li, and Z. He, “Research on spatial alignment of laser and electron beam in the generation of ultra-short electron pulses by laser modulation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS63, pp. 866-869.
- A. Liu, A. D. Bross, and J.-B. Lagrange, “nuPIL - Neutrinos from a PIon Beam Line”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 739-741.
- O. Capatina et al., “CERN Developments for 704 MHz Superconducting Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOB04, pp. 1198-1211.
- H. Hahn et al., “Ferrite Covered Ceramic Break HOM Damper”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP055, pp. 1040-1042.
- L. Calabretta et al., “New Design Issues of the EXCYT Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP038G, pp. 864-866.
- J.-B. Lagrange and Y. Mori, “Advanced FFAG Optics, Design and Experiment”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO4PB03, pp. 120-124.
- Y. Jiao et al., “Progress of Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 229-232.
- M. E. Topp-Mugglestone, J.-B. Lagrange, S. Machida, and S. L. Sheehy, “First Order Analytic Approaches to Modelling the Vertical Excursion Fixed Field Alternating Gradient Accelerator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4262-4265.
- C. Pai et al., “Construction and Power Test of the Extraction Kicker Magnet for the Spallation Neutron Source Accumulator Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT070, pp. 3831-3833.
- S. Seletskiy et al., “Conceptual Design of LEReC Fast Machine Protection System”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 665-668.
- C. Pai et al., “Mechanical Design of Fast Extraction Kicker and PFN for SNS Accumulator Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB049, pp. 2147-2149.
- J. Sauza-Bedolla, S. Atieh, and N. Catalan-Lasheras, “Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 374-376.
- A. T. Wu et al., “Surface Treatments of Nb by Buffered Electropolishing”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO064, pp. 755-759.
- R. Busby et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP081, pp. 4497-4499.
- M. D. Cole et al., “RF Design and Operating Performance of the BNL/AES 1.3 GHz Single Cell Superconducting RF Photocathode Electron Gun”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE061, pp. 3514-3516.
- H. Hahn, “The Relativistic Heavy Ion Collider at Brookhaven”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 109-112.
- K. Beckert et al., “Operation of the ESR at Transition Energy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP03A, pp. 511-513.
- N. Hiller et al., “Single-Shot Electro-Optical Diagnostics at the ANKA Storage Ring”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD17, pp. 182-186.
- J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 11, pp. 95-98.
- A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
- X. Liang et al., “Preparation and Investigation of Antimony Thin Films for Multi-Alkali Photocathodes”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC12, pp. 1163-1165.
- E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069.
- A. M. M. Todd et al., “State-of-the-Art Electron Guns and Injector Designs for Energy Recovery Linacs (ERL)”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP033, pp. 2292-2294.
- C. Xu et al., “Input RF Coupler Design for Energy Compensator Cavity in eRHIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1184-1186.
- V. Schoefer et al., “RHIC Polarized Proton-Proton Operation at 100 GeV in Run 15”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2384-2386.
- F. Severino, M. Harvey, T. Hayes, G. Narayan, and K. S. Smith, “Distributed Feedback Loop Implementation in the RHIC Low Level RF Platform”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOBAB05, pp. 1501-1504.
- Y. Ishi et al., “Present Status and Future of FFAGs at KURRI and the First ADSR Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOCRA03, pp. 1327-1329.
- E. Wang, I. Ben-Zvi, and J. Wang, “Characterization of an SRF Gun: A 3D Full Wave Simulation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP046, pp. 2205-2207.
- S. A. Belomestnykh et al., “SRF and RF Systems for CeC PoP Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO06, pp. 1310-1312.
- V. Litvinenko et al., “Status of R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS076, pp. 1347-1349.
- E. Wang et al., “Progress on Growth of a Multi-alkali Photocathode for ERL”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC18, pp. 1181-1183.
- Z. Geng, B. Hong, K. H. Kim, R. S. Larsen, D. Van Winkle, and C. Xu, “LLRF System for LCLS-II at SLAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA060, pp. 3276-3278.
Back to search