Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Sokollik et al., “A High Repetition Plasma Mirror for Staged Electron Acceleration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP084, pp. 256-258.
[n] A. C. Ceballos et al., “Fabrication and Demonstration of a Silicon Buried Grating Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2717-2719. doi:10.18429/JACoW-IPAC2015-WEPJE021
[n] M. Kando et al., “Design of Electron Beam Injection System for Laser Acceleration Experiments at JAERI-Kansai”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA137, pp. 3702-3704.
[n] H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398.
[n] D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 117-120. doi:10.18429/JACoW-ICALEPCS2015-MOPGF016
[n] V. Variale et al., “Implementations on the RF Charge Breeder Device BRIC with Test Measurements”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS092, pp. 1717-1719.
[n] B. Klump, U. Ratzinger, W. Schweizer, and K. Volk, “Development of a Pepper Pot Emittance Measurement Device for FRANZ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP063, pp. 199-201.
[n] M. Boscolo et al., “Luminosity Measurement at DAFNE for Crab Waist Scheme”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC065, pp. 1203-1205.
[n] A. Massarotti, G. D'Auria, A. Fabris, C. Pasotti, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA R.F. System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 710-713.
[n] A. H. Botha and H. N. Jungwirth, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F04, pp. 263-266.
[n] N. Solyak et al., “PXIE at FNAL”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B03, pp. 414-418.
[n] K. Kasprzak et al., “Automated Quench Limit Test Procedure for Serial Production of XFEL RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2994-2996. doi:10.18429/JACoW-IPAC2015-WEPMN031
[n] D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
[n] G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4243-4247. doi:10.18429/JACoW-IPAC2016-FRXAA01
[n] H. G. Kirk et al., “Beam-power Deposition in a 4-MW Target Station for a Muon Collider or a Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS054, pp. 1653-1655.
[n] Y. Shimosaki et al., “Optimization of Lower Emittance Optics for the SPring-8 Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC013, pp. 1182-1184.
[n] A. Sytov et al., “New Geant4 Simulation Model of Electromagnetic Processes in Oriented Crystals and its Applications in Accelerator Physics”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL129, unpublished.
[n] R. Johnson, F. Pedersen, and S. van der Meer, “Measuring and Manipulating an Accumulated Stack of Antiprotons in the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2123-2126.
[n] M. G. Mazarakis et al., “Design and Power Flow Studies of a 500-TW Inductive Voltage Adder (IVA) Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE06, pp. 1201-1203.
[n] A. P. Lee et al., “Status of the Photo-Injector Development at NSRRC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP081, pp. 563-565.
[n] J. Spanggaard, P. Carriere, S. C. Duarte Pinto, and G. Tranquille, “GEM Detectors for the Transverse Profile Measurement of Low Energy Antiprotons and High Energy Hadrons”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA036, pp. 747-749.
[n] S. M. Alzubaidi, O. Meusel, U. Ratzinger, K. Volk, C. Wagner, and H. Dinter, “A Control System for the FRANZ Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3134-3136. doi:10.18429/JACoW-IPAC2014-THPRO103
[n] T. Yokoi et al., “Beam Injection and Extraction in 150MeV FFAG”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE003, pp. 1076-1078.
[n] F. Lemery, D. Mihalcea, P. Piot, and K. Chouffani, “A Compact X-Ray Source Based on a Low-Energy Beam-Driven Wakefield Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2667-2669. doi:10.18429/JACoW-IPAC2015-WEPWA071
[n] P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
[n] V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
[n] T. A. Welton and T. Nichols, “Orbit Dynamics in Isochronous Cyclotrons”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2480-2483.
[n] T. Kotseroglou et al., “Recent Developments in the Design of the NLC Positron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA28, pp. 3450-3452.
[n] N. Y. Huang, W. K. Lau, A. P. Lee, A. Chao, J. Wu, and C. H. Chen, “Linac Design for the Proposed NSRRC THz/VUV FEL Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2971-2973. doi:10.18429/JACoW-IPAC2014-THPRO047
[n] D. Goetz, J. Grillenberger, M. Humbel, R. Kan, M. Schneider, L. Stingelin, and H. Zhang, “Disturbance Effects Caused by RF Power Leaking Out From Cavities in the PSI Ringcyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CCO03, pp. 341-343.
[n] R. M. Seraphim et al., “Large Vacuum Intervention to Install New BPMs and Radiation Absorbers in the LNLS Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA004, pp. 2475-2477.
[n] L. A. Ahrens et al., “High Intensity Performance of the Brookhaven AGS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRAR3, pp. 614-616.
[n] I. Bogdanov et al., “QUENCH PROCESS IN FAST-CYCLING SUPERCONDUCTING DIPOLE FOR SIS300”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP01, pp. XX-XX.
[n] W. Pan, Q. Du, G. H. Gong, H. Li, and J. M. Li, “A Design of Sub-Nanosecond Timing and Data Acquisition Endpoint for LHAASO Project”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCA01, pp. 1442-1444.
[n] P. Shcherbakov et al., “COMPARATIVE ANALYSIS OF WIDE APERTURE DIPOLE DESIGNS FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP04, pp. XX-XX.
[n] T. Naito et al., “Generation of Multi-Bunch Beam With Thermionic Gun for the Japan Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-18, pp. 88-90.
[n] T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Sokollik et al., “A High Repetition Plasma Mirror for Staged Electron Acceleration”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP084, pp. 256-258.
- A. C. Ceballos et al., “Fabrication and Demonstration of a Silicon Buried Grating Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2717-2719.
- M. Kando et al., “Design of Electron Beam Injection System for Laser Acceleration Experiments at JAERI-Kansai”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA137, pp. 3702-3704.
- H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398.
- D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 117-120.
- V. Variale et al., “Implementations on the RF Charge Breeder Device BRIC with Test Measurements”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS092, pp. 1717-1719.
- B. Klump, U. Ratzinger, W. Schweizer, and K. Volk, “Development of a Pepper Pot Emittance Measurement Device for FRANZ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP063, pp. 199-201.
- M. Boscolo et al., “Luminosity Measurement at DAFNE for Crab Waist Scheme”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC065, pp. 1203-1205.
- A. Massarotti, G. D'Auria, A. Fabris, C. Pasotti, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA R.F. System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 710-713.
- A. H. Botha and H. N. Jungwirth, “The Status of the South African National Accelerator Centre”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F04, pp. 263-266.
- N. Solyak et al., “PXIE at FNAL”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3B03, pp. 414-418.
- K. Kasprzak et al., “Automated Quench Limit Test Procedure for Serial Production of XFEL RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2994-2996.
- D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
- G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4243-4247.
- H. G. Kirk et al., “Beam-power Deposition in a 4-MW Target Station for a Muon Collider or a Neutrino Factory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS054, pp. 1653-1655.
- Y. Shimosaki et al., “Optimization of Lower Emittance Optics for the SPring-8 Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC013, pp. 1182-1184.
- A. Sytov et al., “New Geant4 Simulation Model of Electromagnetic Processes in Oriented Crystals and its Applications in Accelerator Physics”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL129, unpublished.
- R. Johnson, F. Pedersen, and S. van der Meer, “Measuring and Manipulating an Accumulated Stack of Antiprotons in the CERN Antiproton Accumulator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2123-2126.
- M. G. Mazarakis et al., “Design and Power Flow Studies of a 500-TW Inductive Voltage Adder (IVA) Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE06, pp. 1201-1203.
- A. P. Lee et al., “Status of the Photo-Injector Development at NSRRC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP081, pp. 563-565.
- J. Spanggaard, P. Carriere, S. C. Duarte Pinto, and G. Tranquille, “GEM Detectors for the Transverse Profile Measurement of Low Energy Antiprotons and High Energy Hadrons”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA036, pp. 747-749.
- S. M. Alzubaidi, O. Meusel, U. Ratzinger, K. Volk, C. Wagner, and H. Dinter, “A Control System for the FRANZ Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3134-3136.
- T. Yokoi et al., “Beam Injection and Extraction in 150MeV FFAG”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE003, pp. 1076-1078.
- F. Lemery, D. Mihalcea, P. Piot, and K. Chouffani, “A Compact X-Ray Source Based on a Low-Energy Beam-Driven Wakefield Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2667-2669.
- P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
- V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
- T. A. Welton and T. Nichols, “Orbit Dynamics in Isochronous Cyclotrons”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2480-2483.
- T. Kotseroglou et al., “Recent Developments in the Design of the NLC Positron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA28, pp. 3450-3452.
- N. Y. Huang, W. K. Lau, A. P. Lee, A. Chao, J. Wu, and C. H. Chen, “Linac Design for the Proposed NSRRC THz/VUV FEL Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2971-2973.
- D. Goetz, J. Grillenberger, M. Humbel, R. Kan, M. Schneider, L. Stingelin, and H. Zhang, “Disturbance Effects Caused by RF Power Leaking Out From Cavities in the PSI Ringcyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper WEM2CCO03, pp. 341-343.
- R. M. Seraphim et al., “Large Vacuum Intervention to Install New BPMs and Radiation Absorbers in the LNLS Electron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA004, pp. 2475-2477.
- L. A. Ahrens et al., “High Intensity Performance of the Brookhaven AGS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRAR3, pp. 614-616.
- I. Bogdanov et al., “QUENCH PROCESS IN FAST-CYCLING SUPERCONDUCTING DIPOLE FOR SIS300”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP01, pp. XX-XX.
- W. Pan, Q. Du, G. H. Gong, H. Li, and J. M. Li, “A Design of Sub-Nanosecond Timing and Data Acquisition Endpoint for LHAASO Project”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOCA01, pp. 1442-1444.
- P. Shcherbakov et al., “COMPARATIVE ANALYSIS OF WIDE APERTURE DIPOLE DESIGNS FOR THE SIS300 RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP04, pp. XX-XX.
- T. Naito et al., “Generation of Multi-Bunch Beam With Thermionic Gun for the Japan Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-18, pp. 88-90.
- T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
Back to search