Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Gubin et al., “Test of Construction for High Temperature Intense Neutron Target Prototype”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT118, pp. 1416-1418.
[n] S. I. Sosa Guitron, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Effects of Crab Cavitiy Multipoles on JLEIC Ion Ring Dynamic Aperture”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3025-3027. doi:10.18429/JACoW-IPAC2017-WEPIK044
[n] M. Romagnoni, “Future Prospective for Bent Crystals in Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3545-3547. doi:10.18429/JACoW-IPAC2021-WEPAB360
[n] M. F. Vorogushin, “NIIEFA Accelerators for Industry and Medicine”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRXCH01, pp. 167-171.
[n] S. Kashiwagi et al., “Manipulation and Measurement of Polarization State for THz Coherent Undulator Radiation”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 69-72. doi:10.18429/JACoW-LINAC2022-MOPOJO18
[n] A. Vasidov, K. M. Mukimov, and A. I. Muminov, “The Formation of Strip Domains in Bubble Garnet Films by Proton Irradiation”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-28, pp. 116-118.
[n] M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
[n] Y.-C. Lin, P.-J. Wen, C.-R. Chen, and A.-Y. Chen, “Assessment of the ratios of radiation sources and total electron loss at the injection section of the Taiwan Photon Source facility and total electron loss by using neutron measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3359-3361. doi:10.18429/JACoW-IPAC2024-THPG43
[n] D. K. Wells, “A Small Cold-Cathode" High- Intensity Cyclotron Ion Source"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 70-72.
[n] S.-Y. Lin and Y.-H. LIN, “Development of a comprehensive Biosafety Management System for external user experiments at NSRRC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1056-1058. doi:10.18429/JACoW-IPAC2025-TUPB040
[n] A. Pauluhn, “Stochastic Dynamics for Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 270-273.
[n] S. Kh. Egamediev, S. Khujaev, and A. I. Muminov, “Production of Carrier-Free Germanium-68 by Alpha-Particle Bombardment Zinc Cyclotron Target”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-19, pp. XX-XX.
[n] J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP111, pp. 739-742.
[n] H. F. Hao et al., “Beam Extraction System of Compact Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP101, pp. 256-257.
[n] Q. Kerns, S. Childress, C. Crawford, R. Fuja, and R. Janes, “Tuned Beam Position Detector for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 661-664.
[n] C. de Martinis et al., “Design and Test of a Prototype Cavity for the ELFA Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1286-1289.
[n] K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 517-520. doi:10.18429/JACoW-ICALEPCS2015-TUA3O04
[n] X. E. Lin and N. M. Kroll, “Minimum Wakefield Achievable by Waveguide Damped Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR10, pp. 1809-1811.
[n] T. Tanaka, K. Hayakawa, K. Sato, O. Takeda, Y. Torizuka, and K. Yoshida, “Construction of a 35 MeV Double Sided Microtron ( DSM )”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-35, pp. 614-616.
[n] F. Marteau et al., “Development of an Electromagnetic/Permanent Magnet Helical Undulator for Fast Polarisation Switching”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP081, pp. 2456-2458.
[n] J. Kemppinen, Z. S. Kostka, and H. Mainaud Durand, “Cam Mover Alignment System Positioning with Wire Position Sensor Feedback for CLIC”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 32-34. doi:10.18429/JACoW-MEDSI2016-MOPE15
[n] D. Boussard, G. Dome, and T. P. R. Linnecar, “Acceleration in the CERN-SPS - Present Status and Future Developments”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3231-3234.
[n] Y. Jaski, “Closing Remarks”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX.
[n] S. Clark and J. Otter, “Magnets for the CERN PS Booster Transfer Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P046, pp. 3336-3337.
[n] O. Marcouill?® et al., “An In Vacuum Wiggler WSV50 for Producing Hard X-rays at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC120, pp. 2288-2290.
[n] J. Shi et al., “Development of Heavy Ion Radiotherapy Facilities in China”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO06, pp. 167-169. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO06
[n] M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
[n] Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
[n] Z. G. Zong et al., “Electro-polished Cavities Using China Ningxia Large Grain Niobium Material”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN047, pp. 2143-2145.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Gubin et al., “Test of Construction for High Temperature Intense Neutron Target Prototype”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT118, pp. 1416-1418.
- S. I. Sosa Guitron, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Effects of Crab Cavitiy Multipoles on JLEIC Ion Ring Dynamic Aperture”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3025-3027.
- M. Romagnoni, “Future Prospective for Bent Crystals in Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3545-3547.
- M. F. Vorogushin, “NIIEFA Accelerators for Industry and Medicine”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRXCH01, pp. 167-171.
- S. Kashiwagi et al., “Manipulation and Measurement of Polarization State for THz Coherent Undulator Radiation”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 69-72.
- A. Vasidov, K. M. Mukimov, and A. I. Muminov, “The Formation of Strip Domains in Bubble Garnet Films by Proton Irradiation”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-28, pp. 116-118.
- M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
- Y.-C. Lin, P.-J. Wen, C.-R. Chen, and A.-Y. Chen, “Assessment of the ratios of radiation sources and total electron loss at the injection section of the Taiwan Photon Source facility and total electron loss by using neutron measurements”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG43, pp. 3359-3361.
- D. K. Wells, “A Small Cold-Cathode" High- Intensity Cyclotron Ion Source"”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 70-72.
- S.-Y. Lin and Y.-H. LIN, “Development of a comprehensive Biosafety Management System for external user experiments at NSRRC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB040, pp. 1056-1058.
- A. Pauluhn, “Stochastic Dynamics for Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 270-273.
- S. Kh. Egamediev, S. Khujaev, and A. I. Muminov, “Production of Carrier-Free Germanium-68 by Alpha-Particle Bombardment Zinc Cyclotron Target”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-19, pp. XX-XX.
- J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP111, pp. 739-742.
- H. F. Hao et al., “Beam Extraction System of Compact Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP101, pp. 256-257.
- Q. Kerns, S. Childress, C. Crawford, R. Fuja, and R. Janes, “Tuned Beam Position Detector for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 661-664.
- C. de Martinis et al., “Design and Test of a Prototype Cavity for the ELFA Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1286-1289.
- K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 517-520.
- X. E. Lin and N. M. Kroll, “Minimum Wakefield Achievable by Waveguide Damped Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR10, pp. 1809-1811.
- T. Tanaka, K. Hayakawa, K. Sato, O. Takeda, Y. Torizuka, and K. Yoshida, “Construction of a 35 MeV Double Sided Microtron ( DSM )”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-35, pp. 614-616.
- F. Marteau et al., “Development of an Electromagnetic/Permanent Magnet Helical Undulator for Fast Polarisation Switching”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP081, pp. 2456-2458.
- J. Kemppinen, Z. S. Kostka, and H. Mainaud Durand, “Cam Mover Alignment System Positioning with Wire Position Sensor Feedback for CLIC”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 32-34.
- D. Boussard, G. Dome, and T. P. R. Linnecar, “Acceleration in the CERN-SPS - Present Status and Future Developments”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3231-3234.
- Y. Jaski, “Closing Remarks”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX.
- S. Clark and J. Otter, “Magnets for the CERN PS Booster Transfer Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P046, pp. 3336-3337.
- O. Marcouill?® et al., “An In Vacuum Wiggler WSV50 for Producing Hard X-rays at SOLEIL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC120, pp. 2288-2290.
- J. Shi et al., “Development of Heavy Ion Radiotherapy Facilities in China”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEAO06, pp. 167-169.
- M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
- Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
- Z. G. Zong et al., “Electro-polished Cavities Using China Ningxia Large Grain Niobium Material”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN047, pp. 2143-2145.
Back to search