JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 350-353. 
[n]	C. Nieter and J. R. Cary, “VORPAL - A Multidimensional Code for Simulating Advanced Acceleration Concepts”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH110, pp. 3105-3107. 
[n]	Yu. D. Kliuchevskaia and S. M. Polozov, “Optimization of the RF-Gun With Photocathode at Operating Frequency 2800 MHz for the New Injection Linac for USSR Project”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 319-321. doi:10.18429/JACoW-RuPAC2021-TUPSB43
[n]	I. Hofmann, “Revisiting the Longitudinal 90 Degree Limit for Superconducting Linear Accelerators”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 369-372. doi:10.18429/JACoW-HB2018-THP2WB01
[n]	V. A. Azhippo et al., “Operation of a 300 MeV Electron Linac in the Short-Beam Mode”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-49, pp. 563-565. 
[n]	S. Peggs and V. Mane, “KRAKEN, a Numerical Model of RHIC Impedances”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC26, pp. 3137-3139. 
[n]	S. Assadi, “SNS Transverse and Longitudinal Laser Profile Monitors Design, Implementation and Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH156, pp. 3161-3163. 
[n]	Y. Jongen and G. Ryckewaert, “An Injector Cyclotron for Cyclone”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1732-1736. 
[n]	S. Zhang, “Implementing Distributed Technology on BESIII Slow Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP102, pp. XX-XX. 
[n]	P. Fritschel et al., “Readout and Control of a Power-Recycled Interferometric Gravitational Wave Antenna”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WECT003, pp. XX-XX. 
[n]	S. V. Kuzikov, S. P. Antipov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 525-528. doi:10.18429/JACoW-FEL2017-WEP055
[n]	E. Plouviez European Synchrotron Radiation Facility, “Microwave Pickups for the Observation of Multi GHz Signals Induced by the ESRF Storage Ring Electron Bunches”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS14, pp. XX-XX. 
[n]	G. Ribeiro, G. Arabidze, P. Lafarguette, and S. Nemecek, “The ATLAS Tile Calorimeter Detector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN023, pp. 929-931. 
[n]	S. J. Mills, F. M. Nortier, H. A. Smit, G. F. Steyn, and W. L. Rautenbach, “A Multi-Purpose Target Station for Radioisotope Production at Medium Energies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-06, pp. 527-530. 
[n]	I. B. Enchevich, M. J. Barnes, and R. L. Poirier, “Analysis of Eddy Currents in the Walls of the Ferrite Tuned rf Cavity for the TRIUMF Kaon Factory Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 699-702. 
[n]	K. H?Âppner et al., “Development of a Web-based Shift Reporting Tool for Accelerator Operation at the Heidelberg Ion Beam Therapy Center”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC106, pp. 822-824. 
[n]	A. S. Chikhachev and H. Y. Barminova, “About Behavior of Electrons and Ions in the Accelerating Interval”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 372-373. doi:10.18429/JACoW-RUPAC2016-WEPSB008
[n]	Y. Yano, “RIKEN RI Beam Factory Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPC003, pp. 320-324. 
[n]	B. Kriegbaum and F. Pedersen, “Electronics for the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1695-1698. 
[n]	I. V. Rybakov and I. I. Isaev, “Estimation of Multipacting in CDS Structure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 288-290. doi:10.18429/JACoW-RUPAC2016-TUPSA035
[n]	H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712. 
[n]	A. Markovik, K. Floettmann, G. P?Âplau, and U. van Rienen, “Simulation of 3D Space-charge Fields of Bunches in a Beam Pipe of Elliptical Shape”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH120, pp. 2200-2202. 
[n]	V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, and D. C. Weber, “A Novel Intensity Compensation Method to Achieve Energy Independent Beam Intensity at the Patient Location for Cyclotron Based Proton Therapy Facilities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3004-3006. doi:10.18429/JACoW-IPAC2022-THPOMS024
[n]	A. Kling, K. Balewski, and R. Bartolini, “Turn-by-turn Data Analysis for PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA017, pp. 2514-2516. 
[n]	R. A. Kadyrov, J. H. De Long, K. Ha, S. So, and E. Stavitski, “Encoder Interface for NSLS-II Beam Line Motion Scanning Applications”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 881-884. doi:10.18429/JACoW-ICALEPCS2015-WEPGF080

For LaTeX

Use Complete Form

For BibTeX

References

Back to search