Favourites
For Word
[n] H. Katagiri, K. Furukawa, H. Hanaki, and S. Anami, “Microwave Monitor System for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D025, pp. 142-144.
[n] J. G. Melton, M. J. Burns, and D. J. Honaberger, “Pulsed Taut-Wire Measurement of the Magnetic Alignment of the ITS Induction Cells”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2944-2947.
[n] H. F. Ouyang, T. Huang, J. Li, J. Peng, and T. G. Xu, “Experimental Results of Beam Halo at IHEP”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP243, pp. 151-153.
[n] G. E. Lee-Whiting and J. H. Ormrod, “Longitudinal Space-Charge Effects in Bunchers”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-4, pp. 346-352.
[n] F. Marcellini et al., “Coupling Impedance of DAFNE Upgraded Vacuum Chamber”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP051, pp. 1661-1663.
[n] K. A. Brown et al., “First Beam Tests of the Muon Collider Target Test Beam Line at the AGS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH129, pp. 1511-1513.
[n] S. Schaller et al., “Experience Controlling the LAMPF-PSR Accelerator Complex”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 7-10. doi:10.18429/JACoW-ICALEPCS1991-S01SRA02
[n] N. Kuklev, “Fast linac optics measurement with machine learning methods”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB003, unpublished.
[n] P. Goslawski et al., “A Highly Competitive Non-Standard Lattice for a 4th Generation Light Source With Metrology and Timing Capabilities”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 58-61. doi:10.18429/JACoW-FLS2023-TU1B1
[n] Z. Insepov, B. W. Adams, J. Norem, and V. Ivanov, “Simulations of Fast X-ray Detectors Based on Multichannel Plates”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR067, pp. 939-941.
[n] V. Pettinacci, D. Alesini, L. Pellegrino, and L. Palumbo, “Thermal-mechanical Analysis of the RF Structures for the ELI-NP Proposal”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3860-3862. doi:10.18429/JACoW-IPAC2014-THPRI043
[n] J. C. Huang, J. Chen, C.-S. Hwang, F.-Y. Lin, and Y. T. Yu, “Heat Load Budget on TPS Undulator in Vacuum”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP077, pp. 741-743.
[n] P. Korysko et al., “Updates, Status and Experiments of CLEAR, the CERN Linear Electron Accelerator for Research”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3022-3025. doi:10.18429/JACoW-IPAC2022-THPOMS030
[n] Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3769-3771. doi:10.18429/JACoW-IPAC2018-THPAL055
[n] B. D. Muratori and Y. M. Saveliev, “ALICE (ERLP) Injector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC058, pp. 196-198.
[n] S. Samsam et al., “High order mode analysis in energy recovery linac based on an energy budget model”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 77-80. doi:10.18429/JACoW-IPAC2023-MOPA018
[n] L. Serafini et al., “Symmetric Compton Scattering: A Way Towards Plasma Heating and Tunable Mono-chromatic Gamma-rays”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 95-98. doi:10.18429/JACoW-FLS2023-TU4P11
[n] A. Chance, T. Da Silva, B. Dalena, and A. Ghribi, “Status and plans for the high energy booster of the future electron-positron collider FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 708-711. doi:10.18429/JACoW-IPAC2023-MOPL070
[n] K. T. McDonald et al., “The R&D Program for Targetry at a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH156, pp. 1586-1588.
[n] M. Uesaka, K. Dobashi, T. Fujiwara, H. Harada, K. Tagi, and M. Yamamoto, “Application of X-band 30 MeV Linac Neutron Source to Nuclear Material Analysis for Fukushima Nuclear Plant Accident”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA010, pp. 3648-3650.
[n] E. Panofski, A. Jankowiak, T. Kamps, and A. Neumann, “Multi-Objective Optimization of an SRF Photoinjector with Booster Section for High Brightness Beam Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3193-3196. doi:10.18429/JACoW-IPAC2018-THPAF087
[n] J. C. Smith et al., “Bench-top Impedance Measurements for a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP073, pp. 1703-1705.
[n] D. Wollmann et al., “Experimental Verification for a Collimator with In-jaw Beam Position Monitors”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP242, pp. 146-150.
[n] D. Samoilenko et al., “Realistic modeling of fully coherent light sources”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL012, unpublished.
[n] S. Redaelli, X. Buffat, M. Lamont, G. J. M?â, R. J. Steinhagen, and J. Wenninger, “Commissioning of Ramp and Squeeze at the LHC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD54, pp. 202-206.
[n] E. Karantzoulis, A. Carniel, R. De Monte, S. Krecic, and C. P. Pasotti, “Status of Elettra and Future Upgrades”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4054-4056. doi:10.18429/JACoW-IPAC2018-THPMF010
For LaTeX
Use Complete Form
For BibTeX
References
- H. Katagiri, K. Furukawa, H. Hanaki, and S. Anami, “Microwave Monitor System for the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D025, pp. 142-144.
- J. G. Melton, M. J. Burns, and D. J. Honaberger, “Pulsed Taut-Wire Measurement of the Magnetic Alignment of the ITS Induction Cells”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2944-2947.
- H. F. Ouyang, T. Huang, J. Li, J. Peng, and T. G. Xu, “Experimental Results of Beam Halo at IHEP”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP243, pp. 151-153.
- G. E. Lee-Whiting and J. H. Ormrod, “Longitudinal Space-Charge Effects in Bunchers”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper E-4, pp. 346-352.
- F. Marcellini et al., “Coupling Impedance of DAFNE Upgraded Vacuum Chamber”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP051, pp. 1661-1663.
- K. A. Brown et al., “First Beam Tests of the Muon Collider Target Test Beam Line at the AGS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH129, pp. 1511-1513.
- S. Schaller et al., “Experience Controlling the LAMPF-PSR Accelerator Complex”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S01SRA02, pp. 7-10.
- N. Kuklev, “Fast linac optics measurement with machine learning methods”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB003, unpublished.
- P. Goslawski et al., “A Highly Competitive Non-Standard Lattice for a 4th Generation Light Source With Metrology and Timing Capabilities”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TU1B1, pp. 58-61.
- Z. Insepov, B. W. Adams, J. Norem, and V. Ivanov, “Simulations of Fast X-ray Detectors Based on Multichannel Plates”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR067, pp. 939-941.
- V. Pettinacci, D. Alesini, L. Pellegrino, and L. Palumbo, “Thermal-mechanical Analysis of the RF Structures for the ELI-NP Proposal”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3860-3862.
- J. C. Huang, J. Chen, C.-S. Hwang, F.-Y. Lin, and Y. T. Yu, “Heat Load Budget on TPS Undulator in Vacuum”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP077, pp. 741-743.
- P. Korysko et al., “Updates, Status and Experiments of CLEAR, the CERN Linear Electron Accelerator for Research”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3022-3025.
- Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3769-3771.
- B. D. Muratori and Y. M. Saveliev, “ALICE (ERLP) Injector Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC058, pp. 196-198.
- S. Samsam et al., “High order mode analysis in energy recovery linac based on an energy budget model”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA018, pp. 77-80.
- L. Serafini et al., “Symmetric Compton Scattering: A Way Towards Plasma Heating and Tunable Mono-chromatic Gamma-rays”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TU4P11, pp. 95-98.
- A. Chance, T. Da Silva, B. Dalena, and A. Ghribi, “Status and plans for the high energy booster of the future electron-positron collider FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL070, pp. 708-711.
- K. T. McDonald et al., “The R&D Program for Targetry at a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH156, pp. 1586-1588.
- M. Uesaka, K. Dobashi, T. Fujiwara, H. Harada, K. Tagi, and M. Yamamoto, “Application of X-band 30 MeV Linac Neutron Source to Nuclear Material Analysis for Fukushima Nuclear Plant Accident”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA010, pp. 3648-3650.
- E. Panofski, A. Jankowiak, T. Kamps, and A. Neumann, “Multi-Objective Optimization of an SRF Photoinjector with Booster Section for High Brightness Beam Performance”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3193-3196.
- J. C. Smith et al., “Bench-top Impedance Measurements for a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP073, pp. 1703-1705.
- D. Wollmann et al., “Experimental Verification for a Collimator with In-jaw Beam Position Monitors”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP242, pp. 146-150.
- D. Samoilenko et al., “Realistic modeling of fully coherent light sources”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL012, unpublished.
- S. Redaelli, X. Buffat, M. Lamont, G. J. M?â, R. J. Steinhagen, and J. Wenninger, “Commissioning of Ramp and Squeeze at the LHC”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD54, pp. 202-206.
- E. Karantzoulis, A. Carniel, R. De Monte, S. Krecic, and C. P. Pasotti, “Status of Elettra and Future Upgrades”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4054-4056.
Back to search