Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90.
[n] M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1348-1350. doi:10.18429/JACoW-IPAC2022-TUPOTK057
[n] S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n] A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 292-297. doi:10.18429/JACoW-ICALEPCS2017-TUDPL03
[n] V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
[n] C. M. S. Sears, R. L. Byer, E. R. Colby, T. Plettner, R. Siemann, and J. E. Spencer, “Harmonic Inverse FEL Interaction at 800nm”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP056, pp. XX-XX.
[n] J. Rodnizki et al., “Superconducting Accelerating Cavity Pressure Sensitivity Analysis and Stiffening”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP134, pp. 373-376.
[n] M. Bassetti, O. Coiro, A. Ghigo, M. Migliorati, L. Palumbo, and M. Serio, “DAPhiNE Longitudinal Feedback”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 807-810.
[n] J. A. Macdonald et al., “An RF Separator for Cloud Muons at TRIUMF”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2833-2836.
[n] S. Banna, V. Berezovsky, and L. Schachter, “First Experimental Evidence for PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI01, pp. 1889-1893.
[n] B. Kaizer, Y. Ben Aliz, I. Fishman, J. Rodnizki, and L. Weissman, “Warming Rate Reduction of the SARAF RF Couplers by Application of a High Voltage Dc Bias”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP132, pp. 1168-1170.
[n] J. B. Pearson et al., “Magnetic Channel Design Concepts for the Extraction of H- Ions from the TRIUMF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1848-1851.
[n] E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Muon Production via the ESSnuSB Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3213-3215. doi:10.18429/JACoW-IPAC2016-THPMB001
[n] G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 343-346.
[n] J. L. Rothman and R. J. Nawrocky, “Active Interlock for Storage Ring Insertion Devices”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 266-268.
[n] S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160.
[n] J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-02, pp. 435-438.
[n] M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346.
[n] A. Rubio, G. Cuni, D. Fernandez-Carreiras, S. Rubio-Manrique, N. Serra, and J. Villanueva, “ALBA Equipment Protection System, Current Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1599-1603. doi:10.18429/JACoW-ICALEPCS2017-THPHA096
[n] C. K. Sinclair et al., “Thermal Emittance Measurements from Negative Electron Affinity Photocathodes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS020, pp. 1221-1223.
[n] V. Ivanov, K. Ko, A. Krasnykh, L. Ives, and G. Miram, “3D Method for the Design of Multi or Sheet Beam RF Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH312, pp. 1213-1215.
[n] A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6. doi:10.18429/JACoW-RuPAC2021-MOX02
[n] B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1545-1548.
[n] K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 559-562.
[n] P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
[n] H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n] C. Schmidt and C. Curtis, “Negative Hydrogen-Ion Program at Fermilab”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB11, pp. 402-404.
[n] R. J. Pasquinelli, “Twenty-five Years of Stochastic Cooling Experience at Fermilab”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO01, pp. 36-40.
[n] H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
[n] A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
[n] O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 852-854. doi:10.18429/JACoW-IPAC2019-MOPTS007
[n] B. X. Yang et al., “Status of the APS Diagnostics Undulator Beamline”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P045, pp. 2207-2209.
[n] M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n] R. Billen, “LEP Traceability”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B05, pp. 2411-2413.
[n] D. Schirmer and A. Althaus, “Integration of a Model Server into the Control System of the Synchrotron Light Source DELTA”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1427. doi:10.18429/JACoW-ICALEPCS2019-WEPHA137
[n] L. Neri et al., “Beam Commissioning of the High Intensity Proton Source Developed at INFN-LNS for the European Spallation Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2530-2532. doi:10.18429/JACoW-IPAC2017-WEOBB2
[n] C. K. Sinclair, “High Brightness, High Average Current Injector Development at Cornell”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper WEOB002, pp. XX-XX.
[n] E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 561-563. doi:10.18429/JACoW-IPAC2017-MOPIK029
[n] M. Schmidt, A. Thorn, and G. Zschornack, “DREEBIT EBIS/T for Applications in Accelerator Physics”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEB03, pp. 170-171.
[n] P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
[n] J. Willard, T. Wilson, and W. A. Wurtz, “Compensation Controls for an Elliptically Polarising Undulator”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1658-1662. doi:10.18429/JACoW-ICALEPCS2017-THPHA120
[n] W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280.
[n] J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2132-2135.
[n] G. Portmann, “Slow Orbit Feedback at the ALS using MATLAB”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP45, pp. 2373-2375.
[n] G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193.
[n] P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237.
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
[n] J. T. M. Lyles, W. C. Barkley, R. E. Bratton, M. S. Prokop, and D. Rees, “Design, Fabrication, Installation and Operation of New 201 MHz RF Systems at LANSCE”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 564-567. doi:10.18429/JACoW-LINAC2016-TUPLR046
[n] K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363.
[n] R. Nietuby et al., “Status of PolFEL project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp..
[n] A. Shimizu, I. Miura, and T. Saito, “Post-Injector Cyclotron Beam Bunching System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-13, pp. 376-379.
[n] K. O. Creek and D. J. Liska, “D. C. Power System for Deuteron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2988-2991.
[n] R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793.
[n] C. Diao and H. O. Moser, “Numerical study of field errors due to mechanical tolerances in superconducting miniundulators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA061, pp. 711-713.
[n] E. S. McCrory, L. Allen, K. L. Junck, M. Popovicacute, and C. Schmidt, “The Performance of the Beam Diagnostics Systems for the Fermilab 400 MeV Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-75, pp. 878-880.
[n] L. Ahrens et al., “SNS Ring Study at the AGS Booster”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B16, pp. 987-992.
[n] K. Furukawa and R. Rechenmacher, “Network Analyser for the EPICS Channel Access Protocol”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP008, pp. 96-98.
[n] D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 319-322. doi:10.18429/JACoW-RUPAC2018-WEPSB17
[n] J. J. Song, S. O. Brauer, Y. W. Kang, R. L. Kustom, and A. Nassiri, “HOM (Higher-Order Mode) Damper Tests of Advanced Photon Source Storage Ring Cavity with a 20 MeVe- Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1277-1280.
[n] K. Bourkland, C. Curtis, G. Lee, and G. Tool, “Improved FNAL Linac Beam Choppers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2994-2997.
[n] N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 964-967.
[n] C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 979-982.
[n] S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4362-4365. doi:10.18429/JACoW-IPAC2018-THPMK031
[n] C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 307-310. doi:10.18429/JACoW-ICALEPCS2017-TUMPL04
[n] C. Roderick, R. Billen, M. Gourber-Pace, N. Hoibian, and M. Peryt, “The CERN Accelerator Measurement Database: On the Road to Federation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN009, pp. 102-105.
[n] R. Bourtembourg et al., “TANGO Kernel Development Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 27-33. doi:10.18429/JACoW-ICALEPCS2017-MOBPL02
[n] A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486.
For LaTeX
Use Complete Form
For BibTeX
References
- M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90.
- M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1348-1350.
- S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3716-3719.
- A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 292-297.
- V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
- C. M. S. Sears, R. L. Byer, E. R. Colby, T. Plettner, R. Siemann, and J. E. Spencer, “Harmonic Inverse FEL Interaction at 800nm”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP056, pp. XX-XX.
- J. Rodnizki et al., “Superconducting Accelerating Cavity Pressure Sensitivity Analysis and Stiffening”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP134, pp. 373-376.
- M. Bassetti, O. Coiro, A. Ghigo, M. Migliorati, L. Palumbo, and M. Serio, “DAPhiNE Longitudinal Feedback”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 807-810.
- J. A. Macdonald et al., “An RF Separator for Cloud Muons at TRIUMF”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2833-2836.
- S. Banna, V. Berezovsky, and L. Schachter, “First Experimental Evidence for PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXKI01, pp. 1889-1893.
- B. Kaizer, Y. Ben Aliz, I. Fishman, J. Rodnizki, and L. Weissman, “Warming Rate Reduction of the SARAF RF Couplers by Application of a High Voltage Dc Bias”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP132, pp. 1168-1170.
- J. B. Pearson et al., “Magnetic Channel Design Concepts for the Extraction of H- Ions from the TRIUMF Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1848-1851.
- E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Muon Production via the ESSnuSB Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3213-3215.
- G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 343-346.
- J. L. Rothman and R. J. Nawrocky, “Active Interlock for Storage Ring Insertion Devices”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 266-268.
- S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160.
- J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-02, pp. 435-438.
- M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346.
- A. Rubio, G. Cuni, D. Fernandez-Carreiras, S. Rubio-Manrique, N. Serra, and J. Villanueva, “ALBA Equipment Protection System, Current Status”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1599-1603.
- C. K. Sinclair et al., “Thermal Emittance Measurements from Negative Electron Affinity Photocathodes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS020, pp. 1221-1223.
- V. Ivanov, K. Ko, A. Krasnykh, L. Ives, and G. Miram, “3D Method for the Design of Multi or Sheet Beam RF Sources”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH312, pp. 1213-1215.
- A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6.
- B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1545-1548.
- K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 559-562.
- P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
- H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1921-1923.
- C. Schmidt and C. Curtis, “Negative Hydrogen-Ion Program at Fermilab”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB11, pp. 402-404.
- R. J. Pasquinelli, “Twenty-five Years of Stochastic Cooling Experience at Fermilab”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO01, pp. 36-40.
- H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
- A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
- O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 852-854.
- B. X. Yang et al., “Status of the APS Diagnostics Undulator Beamline”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P045, pp. 2207-2209.
- M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 949.
- R. Billen, “LEP Traceability”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B05, pp. 2411-2413.
- D. Schirmer and A. Althaus, “Integration of a Model Server into the Control System of the Synchrotron Light Source DELTA”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1427.
- L. Neri et al., “Beam Commissioning of the High Intensity Proton Source Developed at INFN-LNS for the European Spallation Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2530-2532.
- C. K. Sinclair, “High Brightness, High Average Current Injector Development at Cornell”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper WEOB002, pp. XX-XX.
- E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 561-563.
- M. Schmidt, A. Thorn, and G. Zschornack, “DREEBIT EBIS/T for Applications in Accelerator Physics”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEB03, pp. 170-171.
- P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
- J. Willard, T. Wilson, and W. A. Wurtz, “Compensation Controls for an Elliptically Polarising Undulator”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1658-1662.
- W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3277-3280.
- J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2132-2135.
- G. Portmann, “Slow Orbit Feedback at the ALS using MATLAB”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP45, pp. 2373-2375.
- G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193.
- P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
- J. T. M. Lyles, W. C. Barkley, R. E. Bratton, M. S. Prokop, and D. Rees, “Design, Fabrication, Installation and Operation of New 201 MHz RF Systems at LANSCE”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 564-567.
- K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 360-363.
- R. Nietuby et al., “Status of PolFEL project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp..
- A. Shimizu, I. Miura, and T. Saito, “Post-Injector Cyclotron Beam Bunching System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-13, pp. 376-379.
- K. O. Creek and D. J. Liska, “D. C. Power System for Deuteron Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2988-2991.
- R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2790-2793.
- C. Diao and H. O. Moser, “Numerical study of field errors due to mechanical tolerances in superconducting miniundulators”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA061, pp. 711-713.
- E. S. McCrory, L. Allen, K. L. Junck, M. Popovicacute, and C. Schmidt, “The Performance of the Beam Diagnostics Systems for the Fermilab 400 MeV Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-75, pp. 878-880.
- L. Ahrens et al., “SNS Ring Study at the AGS Booster”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B16, pp. 987-992.
- K. Furukawa and R. Rechenmacher, “Network Analyser for the EPICS Channel Access Protocol”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP008, pp. 96-98.
- D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 319-322.
- J. J. Song, S. O. Brauer, Y. W. Kang, R. L. Kustom, and A. Nassiri, “HOM (Higher-Order Mode) Damper Tests of Advanced Photon Source Storage Ring Cavity with a 20 MeVe- Beam”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1277-1280.
- K. Bourkland, C. Curtis, G. Lee, and G. Tool, “Improved FNAL Linac Beam Choppers”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2994-2997.
- N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 964-967.
- C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 979-982.
- S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4362-4365.
- C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 307-310.
- C. Roderick, R. Billen, M. Gourber-Pace, N. Hoibian, and M. Peryt, “The CERN Accelerator Measurement Database: On the Road to Federation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN009, pp. 102-105.
- R. Bourtembourg et al., “TANGO Kernel Development Status”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 27-33.
- A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486.
Back to search