Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. G. Vaccaro et al., “Aclip: A 3 Ghz Side Coupled Linac For Protontherapy To Be Used As A Booster For 30 Mev Cyclotrons”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 172-176.
[n] A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81.
[n] C. Steier, D. S. Robin, Y. Wu, W. Decking, J. Laskar, and L. Nadolski, “Understanding the Dynamic Momentum Aperture of the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB003, pp. 434-436.
[n] H. Ao, D. Luo, F. Marti, K. Saito, and S. Shanab, “Polarity Check of the FRIB Cryomodule Solenoids by Measuring Leakage Magnetic Field”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 821-823. doi:10.18429/JACoW-LINAC2016-THPRC024
[n] L. Hagge, J. A. Dammann, J. Iversen, J. Kreutzkamp, and W. Singer, “Towards PLM-based Quality Assurance in the Fabrication of the Superconducting Cavities for the European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC006, pp. 2899-2901.
[n] C. Garion and H. Kos, “Design of the CLIC Quadrupole Vacuum Chambers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP007, pp. 363-365.
[n] T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610.
[n] M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484.
[n] G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 794-797.
[n] M. Pekeler et al., “Performance of a Prototype 176 MHz Beta=0.09 Half-Wave Resonator for the SARAF Linac”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP39, pp. 331-333.
[n] Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, H. S. Song, and S. D. Yang, “Deep Learning Based Predictive Control for RFT-30 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2230-2232. doi:10.18429/JACoW-IPAC2018-WEPAL030
[n] W. Lawson et al., “Amplification Studies of a Multi-Megawatt Two-Cavity X-Band Gyroklystron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 658-661.
[n] A. M. Boyarski, A. S. King, M. J. Lee, J. R. Rees, and N. Spencer, “Automatic Control Program for SPEAR”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 580-584.
[n] M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_001.
[n] D. P. Jarosz, N. D. Arnold, J. Carwardine, G. Decker, N. Schwarz, and S. Veseli, “The Evolution of Component Database for APS Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 192-194. doi:10.18429/JACoW-ICALEPCS2017-TUBPA01
[n] Y. J. Bi et al., “Towards Quantitative Predictions of High Power Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP045, pp. 144-146.
[n] J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260.
[n] A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
[n] L. R. Elias, “John Madey: A Short History of My Friend and Colleague”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 1-4. doi:10.18429/JACoW-FEL2017-MOA01
[n] Y. Yamamoto et al., “Cavity diagnostic system for the vertical test of the baseline SC cavity in KEK-STF”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP13, pp. XX-XX.
[n] P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452.
[n] Z. Chen et al., “Mechanical Design and Fabrication of a New RF Power Amplifier for LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP133, pp. 1085-1087.
[n] H. Kamitsubo, “Invited Paper: The RIKEN Linear Accelerator - Cyclotron System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F03, pp. 257-262.
[n] C. G. Pang, P. Bambade, Y. Funakoshi, and S. Uehara, “Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2250-2253. doi:10.18429/JACoW-IPAC2018-WEPAL037
[n] J. Crisp and J. Satti, “Fermilab Linac Upgrade Side Coupled Cavity Temperature Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3189-3192.
[n] L. J. Mao, J. Dietrich, V. Kamerdzhiev, B. Lorentz, and H.-J. Stein, “Closed Orbit Correction in 2 MeV Electron Cooler Section at COSY-Juelich”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS03, pp. 92-94.
[n] H. Bongers et al., “The REX-ISOLDE Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01A, pp. 728-730.
[n] B. Cheo, R. Jones, and J. Shmoys, “Input Admittance Matrix of Multiport Driven DTL”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-52, pp. 176-178.
[n] Y. Fujita et al., “First Observation of Micro-Bunch Structure of the 100 MHz HIMAC-Injector Linac Beam by a Thin SEEM”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP32F, pp. 1503-1505.
[n] G. W. Kowalski, “Standarized Approach for Automatic Measurement and Application of Local Feed-Forward Correction for Insertion Devices”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOSH3002, pp. XX-XX.
[n] W. Hartmann et al., “Source of Polarized Electrons”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1335-1337.
[n] K. N. Sjobak, H. Burkhardt, R. De Maria, and V. K. B. Olsen, “Generalised Scattering Module in SixTrack 5”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3156-3159. doi:10.18429/JACoW-IPAC2019-WEPTS026
[n] S. W. Wang, J. Y. Li, Y. G. Wang, W. Xu, and K. Xuan, “Optimization of a Low-Alpha Lattice for the HLS-II Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3360-3362. doi:10.18429/JACoW-IPAC2019-WEPTS103
[n] S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
[n] M. E. Hill, D. Whittum, and F. Zimmermann, “New Concepts for a Compact 5 TeV Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP22G, pp. 865-870.
[n] L. Popielarski et al., “SRF Highbay Technical Infrastructure for FRIB Production at Michigan State University”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP046, pp. 954-956.
[n] M. Sapinski et al., “Requirements of CLIC Beam Loss Monitoring System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB074, pp. 2869-2871.
[n] P. J. S. Barratt, A. P. Letchford, M. Perkins, and R. Sidlow, “A New Remote Control and Monitoring System for the ISIS Ion Source on the 665 kV DC Accelerating Platform”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP081L, pp. 1806-1808.
[n] S. Gustafsson, “A Superconducting Electromagnetic Channel for AGOR”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-07, pp. 354-357.
[n] E. Bulyak et al., “Present Status and Future Plans for Synchrotron Light Source ISI-800”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP075G, pp. 658-660.
[n] A. W. Molvik, W. R. Meier, A. Faltens, L. Reginato, and C. Smith, “Induction Core Performance”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4106, pp. 320-322.
[n] M. Watanabe et al., “Operation of Kicker System using Thyratron of the 3 GeV Rapid Cycling Synchrotron of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD086, pp. 3296-3298.
[n] J. C. Amato, D. Coulombe, J. L. Kirchgessner, and R. M. Sundelin, “Azimuthal Shaping of Cylindrical Accelerating Cavities for Improved Higher Order Mode Extraction”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3593-3596.
[n] T. Abe, T. Kageyama, H. Sakai, Y. Takeuchi, and K. Yoshino, “RF Accelerating Structure for the Damping Ring of the SuperKEKB Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE087, pp. 3548-3550.
For LaTeX
Use Complete Form
For BibTeX
References
- V. G. Vaccaro et al., “Aclip: A 3 Ghz Side Coupled Linac For Protontherapy To Be Used As A Booster For 30 Mev Cyclotrons”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 172-176.
- A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81.
- C. Steier, D. S. Robin, Y. Wu, W. Decking, J. Laskar, and L. Nadolski, “Understanding the Dynamic Momentum Aperture of the Advanced Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPB003, pp. 434-436.
- H. Ao, D. Luo, F. Marti, K. Saito, and S. Shanab, “Polarity Check of the FRIB Cryomodule Solenoids by Measuring Leakage Magnetic Field”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 821-823.
- L. Hagge, J. A. Dammann, J. Iversen, J. Kreutzkamp, and W. Singer, “Towards PLM-based Quality Assurance in the Fabrication of the Superconducting Cavities for the European XFEL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC006, pp. 2899-2901.
- C. Garion and H. Kos, “Design of the CLIC Quadrupole Vacuum Chambers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP007, pp. 363-365.
- T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610.
- M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484.
- G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 794-797.
- M. Pekeler et al., “Performance of a Prototype 176 MHz Beta=0.09 Half-Wave Resonator for the SARAF Linac”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP39, pp. 331-333.
- Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, H. S. Song, and S. D. Yang, “Deep Learning Based Predictive Control for RFT-30 Cyclotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2230-2232.
- W. Lawson et al., “Amplification Studies of a Multi-Megawatt Two-Cavity X-Band Gyroklystron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 658-661.
- A. M. Boyarski, A. S. King, M. J. Lee, J. R. Rees, and N. Spencer, “Automatic Control Program for SPEAR”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 580-584.
- M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O5_001.
- D. P. Jarosz, N. D. Arnold, J. Carwardine, G. Decker, N. Schwarz, and S. Veseli, “The Evolution of Component Database for APS Upgrade”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 192-194.
- Y. J. Bi et al., “Towards Quantitative Predictions of High Power Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP045, pp. 144-146.
- J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260.
- A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
- L. R. Elias, “John Madey: A Short History of My Friend and Colleague”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 1-4.
- Y. Yamamoto et al., “Cavity diagnostic system for the vertical test of the baseline SC cavity in KEK-STF”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP13, pp. XX-XX.
- P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452.
- Z. Chen et al., “Mechanical Design and Fabrication of a New RF Power Amplifier for LANSCE”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP133, pp. 1085-1087.
- H. Kamitsubo, “Invited Paper: The RIKEN Linear Accelerator - Cyclotron System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F03, pp. 257-262.
- C. G. Pang, P. Bambade, Y. Funakoshi, and S. Uehara, “Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2250-2253.
- J. Crisp and J. Satti, “Fermilab Linac Upgrade Side Coupled Cavity Temperature Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3189-3192.
- L. J. Mao, J. Dietrich, V. Kamerdzhiev, B. Lorentz, and H.-J. Stein, “Closed Orbit Correction in 2 MeV Electron Cooler Section at COSY-Juelich”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS03, pp. 92-94.
- H. Bongers et al., “The REX-ISOLDE Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01A, pp. 728-730.
- B. Cheo, R. Jones, and J. Shmoys, “Input Admittance Matrix of Multiport Driven DTL”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-52, pp. 176-178.
- Y. Fujita et al., “First Observation of Micro-Bunch Structure of the 100 MHz HIMAC-Injector Linac Beam by a Thin SEEM”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP32F, pp. 1503-1505.
- G. W. Kowalski, “Standarized Approach for Automatic Measurement and Application of Local Feed-Forward Correction for Insertion Devices”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOSH3002, pp. XX-XX.
- W. Hartmann et al., “Source of Polarized Electrons”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1335-1337.
- K. N. Sjobak, H. Burkhardt, R. De Maria, and V. K. B. Olsen, “Generalised Scattering Module in SixTrack 5”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3156-3159.
- S. W. Wang, J. Y. Li, Y. G. Wang, W. Xu, and K. Xuan, “Optimization of a Low-Alpha Lattice for the HLS-II Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3360-3362.
- S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
- M. E. Hill, D. Whittum, and F. Zimmermann, “New Concepts for a Compact 5 TeV Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP22G, pp. 865-870.
- L. Popielarski et al., “SRF Highbay Technical Infrastructure for FRIB Production at Michigan State University”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP046, pp. 954-956.
- M. Sapinski et al., “Requirements of CLIC Beam Loss Monitoring System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB074, pp. 2869-2871.
- P. J. S. Barratt, A. P. Letchford, M. Perkins, and R. Sidlow, “A New Remote Control and Monitoring System for the ISIS Ion Source on the 665 kV DC Accelerating Platform”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP081L, pp. 1806-1808.
- S. Gustafsson, “A Superconducting Electromagnetic Channel for AGOR”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-07, pp. 354-357.
- E. Bulyak et al., “Present Status and Future Plans for Synchrotron Light Source ISI-800”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP075G, pp. 658-660.
- A. W. Molvik, W. R. Meier, A. Faltens, L. Reginato, and C. Smith, “Induction Core Performance”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4106, pp. 320-322.
- M. Watanabe et al., “Operation of Kicker System using Thyratron of the 3 GeV Rapid Cycling Synchrotron of J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD086, pp. 3296-3298.
- J. C. Amato, D. Coulombe, J. L. Kirchgessner, and R. M. Sundelin, “Azimuthal Shaping of Cylindrical Accelerating Cavities for Improved Higher Order Mode Extraction”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3593-3596.
- T. Abe, T. Kageyama, H. Sakai, Y. Takeuchi, and K. Yoshino, “RF Accelerating Structure for the Damping Ring of the SuperKEKB Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE087, pp. 3548-3550.
Back to search