Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Okuno et al., “New Developments in Low-Z Gas Stripper Sstem at RIKEN Radioactive Isotope Beam Factory (RIBF)”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THB01, pp. 199-205.
[n] J. Lyles and J. Davis, “Improvements to the Cathode-Follower RF Amplifier System for the LANSCE Proton Storage Ring Buncher”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP142, pp. 1001-1003.
[n] D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 108-111. doi:10.18429/JACoW-MEDSI2016-TUAA01
[n] G. Rehm, M. G. Abbott, and A. F. D. Morgan, “New Features and Measurements using the Upgraded Transverse Multibunch Feedback at Diamond”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD24, pp. 696-699.
[n] L. H. Chang, S. S. Chang, M. C. Lin, Ch. Wang, and T. T. Yang, “Design of the Cooling System for a 25 kW Landau Cavity at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP36C, pp. 1903-1905.
[n] K. J. Ruisard, H. Baumgartner, B. Beaudoin, I. Haber, T. W. Koeth, and M. R. Teperman, “Experimental Plans for Single-Channel Strong Octupole Fields at the University of Maryland Electron Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 507-510. doi:10.18429/JACoW-NAPAC2016-TUPOB12
[n] A. Blednykh et al., “Rogue Mode Shielding in NSLS-II Multipole Vacuum Chambers”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM033, pp. 194-198.
[n] T. Watanabe et al., “Commissioning of the Beam Energy Position Monitor System for the Superconducting RIKEN Heavy-ion Linac”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 295-302. doi:10.18429/JACoW-IBIC2020-FRAO04
[n] H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
[n] B. C. Brown et al., “Report on the Production Magnet Measurement System for the Fermilab Energy Saver Superconducting Dipoles and Quadrupoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3608-3611.
[n] T. J. Roberts, S. Ahmed, K. B. Beard, D. Huang, D. M. Kaplan, and L. K. Spentzouris, “G4Beamline Particle Tracking in Matter-dominated Beam Lines”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP120, pp. 2776-2778.
[n] C. H. Chang, T. C. Fan, I. Hsu, C. S. Hwang, and Ch. Wang, “Magnet Sorting Algorithms for the SRRC EPU5.6”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP31G, pp. 2219-2221.
[n] L. Xiao et al., “High Frequency SRF Cavity Study for Bunch Shortening in PEPX”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP042, pp. 998-1001.
[n] A. Novokhatski, “Wake Field Potentials of 'Dechirpers'”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 157-160. doi:10.18429/JACoW-FEL2015-MOP054
[n] S. Yamaguchi, A. Enomoto, I. Sato, and Y. Igarashi, “High-Power Test of Traveling-Wave-Type RF-Pulse Compressor”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ25, pp. 1578-1580.
[n] D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, and A. Y. Orlov, “Test of a Silicon Photomultiplier for Ionization Profile Monitor Applications”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB14, pp. 90-92.
[n] Y. Kamiya et al., “Magnetic Measurement of the VSX Prototype Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22C, pp. 1940-1942.
[n] R. Bonifacio, M. Ferrario, N. Piovella, G. R. M. Robb, A. Schiavi, and L. Serafini, “Quantum SASE FEL with a Laser Wiggler”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP016, pp. XX-XX.
[n] C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 707-710.
[n] J. Shi, W. P. Chai, J. Li, J. W. Xia, J. C. Yang, and Y. J. Yuan, “Feedback of Slow Extraction in CSRm”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO14, pp. 89-91.
[n] R. Hampel, W. F. O. M??ller, and T. Weiland, “ROCOCO - A Zero Dispersion Algorithm for Calculating Wake Potentials”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP30, pp. 144-147.
[n] M. L. Friend et al., “First Beam Profile Measurements by Beam Induced Fluorescence at the J-PARC Neutrino Extraction Beamline”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 184-187. doi:10.18429/JACoW-IBIC2020-WEPP34
[n] O. A. Shevchenko and N. Vinokurov, “Statistical Theory of the SASE FEL Based on the Two-particle Correlation Function Equation”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOOA02, pp. 8-14.
[n] V. Juvan, I. Dolin, T. Humar, M. Pavleski, and P. P. Goryl, “A Structured Approach to Control System GUI Design for the Solaris Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1044-1046. doi:10.18429/JACoW-ICALEPCS2015-WEPGF145
[n] R. Mueller, A. F. Balzer, P. Baumg?ñrtel, G. Hartmann, O.-P. Sauer, and J. Viefhaus, “Modernization of Experimental Data Taking at BESSY II”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 65. doi:10.18429/JACoW-ICALEPCS2019-MOCPL02
[n] L. van Riesen-Haupt, A. Seryi, J. M. Coello de Portugal, E. Fol, and R. Tomas, “K-Modulation Developments via Simultaneous Beam Based Alignment in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2159-2162. doi:10.18429/JACoW-IPAC2017-TUPVA042
[n] K. Okamura et al., “Development of a Pulsed Power Supply Utilizing 13 kV Class SiC-MOSFET”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4364-4367. doi:10.18429/JACoW-IPAC2019-FRXXPLM3
[n] M. Bona et al., “Performance of the First CERN-INFN 10 m Long Superconducting Dipole Prototype for the LHC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2289-2292.
[n] J. A. Holmes, “Collective Effects and Instabilities in Space Charge Dominated Beams”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEYLH03, pp. 189-193.
[n] J. Bobnar, R. Bacher, P. Duval, I. Kri, and M. Lomperski, “New TINE Java General Purpose Diagnostic Applications”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUZ01, pp. 67-69.
[n] Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n] A. Almomani, M. Droba, I. Hofmann, and U. Ratzinger, “Post Acceleration of Laser-generated Proton Bunches by a CH-DTL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB006, pp. 852-854.
[n] L. Farvacque, “Performance of the ESRF Lattice in the Presenced of Errors”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1515-1518.
[n] J. W. Rathke, “Parametric Study of Emerging High Power Accelerator Applications using Accelerator Systems Model (ASM)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP50, pp. 456-460.
[n] A. Brachmann, M. Dunham, and J. F. Schmerge, “LCLS-II - Status and Upgrades”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 772-775. doi:10.18429/JACoW-FEL2019-FRA02
[n] M. P. Donadio, J. R. Piton, and H. D. de Almeida, “Quick Experiment Automation Made Possible Using FPGA in LNLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 229-232. doi:10.18429/JACoW-ICALEPCS2015-MOPGF057
[n] E. Bouquerel, “Design Status of the Beam Switchyard for ESSnuSB”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3215-3217. doi:10.18429/JACoW-IPAC2018-THPAK006
[n] N. Schweizer and I. Pongrac, “Autonomous Topography Detection and Traversal for an Inspection Robot Within the Beamline of Particle Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3943-3945. doi:10.18429/JACoW-IPAC2018-THPAL128
[n] Y. Tao, K. Hwang, and J. Qiang, “Space charge effects of catch-up collision in a CW double-pass proton linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2429-2431. doi:10.18429/JACoW-IPAC2017-TUPVA140
[n] A. J. Moss, P. A. Corlett, P. A. McIntosh, J. F. Orrett, A. E. Wheelhouse, and C. J. White, “Progress on the MICE RF System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB055, pp. 3996-3998.
[n] Z.-D. Tsai, J.-C. Chang, and J.-R. Chen, “The Strategy between Optimal Control and Energy Saving about Utility System Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC132, pp. 1380-1382.
[n] F. Lin et al., “Simulations of Nonlinear Beam Dynamics in the JLEIC Electron Collider Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 555-557. doi:10.18429/JACoW-NAPAC2016-TUPOB29
[n] Y. Hori, Y. Kamiya, T. Koseki, N. Nakamura, K. Shinoe, and Y. Takiyama, “Vacuum System Design and Research for the Super SOR”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH307, pp. 2415-2417.
[n] P. Anger et al., “SPIRAL2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 894-897. doi:10.18429/JACoW-LINAC2016-THPLR024
[n] R. Arnold et al., “Magnetic Measurements and Simulations of a 4-Magnet Dipole Chicane for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS038, pp. 3085-3087.
[n] S. Redaelli et al., “The LHC Collimator Controls Architecture - Design and Beam Tests”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN081, pp. 344-346.
[n] I. Sakai et al., “Operation of the Opposite-Field Septum Magnet for the J-PARC Main-Ring Injection”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS107, pp. 1750-1752.
[n] K. Niki et al., “Beam Transport Design for the Linac System in the INS Radioactive Beam Facility”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-13, pp. 725-727.
[n] J. Bahrdt et al., “APPLE Undulator for PETRA III”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC096, pp. 2219-2221.
[n] R. Modic, M. Pavleski, T. Zagar, J. Belmans, P. Della Faille, and D. Vandeplassche, “MYRRHA Control System Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4823-4825. doi:10.18429/JACoW-IPAC2018-THPML075
[n] A. Fedorova and M. Zeitlin, “Multiresolution Representation for Orbital Dynamics in Multipolar Fields”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B17, pp. 1101-1106.
[n] H. Euteneuer, K.-H. Kaiser, S. Ratschow, and V. I. Shvedunov, “Beam Blow-up Calculations for RTM and DSM”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP28G, pp. 951-953.
[n] T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 389-392. doi:10.18429/JACoW-ICALEPCS2015-MOPGF132
[n] D. A. Lee, C. Gabor, J. K. Pozimski, and P. Savage, “A laserwire beam profile measuring device for the RAL Front End Test Stand”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB11, pp. 81-83.
[n] J. Dovc et al., “New Abeans for TINE Java Control Applications”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP025, pp. XX-XX.
[n] O. Mohsen et al., “Performances of Silicon-Based Field-Emission Cathodes Coated with UltraNano Crystalline Diamond”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2117-2120. doi:10.18429/JACoW-IPAC2019-TUPTS084
[n] S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Optical System of Beam Induced Fluorescence Monitor Toward MW Beam Power at the J-PARC Neutrino Beamline”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 505-508. doi:10.18429/JACoW-IBIC2018-WEPC08
[n] P. V. Drumm and Y. Suzuki, “Laser Stripping Injection for the ESS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A07, pp. 2234-2236.
[n] N. Ouchi et al., “Design and Development Work for a Superconducting Proton Linac at JAERI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A03, pp. 22-26.
[n] H. Suzuki et al., “ECR Ion Source for the KEK All-ion Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC156, pp. 442-444.
[n] N. Kuklev and Y. K. Kim, “Turn-by-Turn Synchrotron Radiation Transverse Profile Monitor for IOTA”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 432-435. doi:10.18429/JACoW-IBIC2019-TUPP042
[n] J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 317-319. doi:10.18429/JACoW-NAPAC2016-TUPOA16
[n] P. Pollet, R. Ischebeck, D. Llorente Sancho, G. Marinkovic, C. Ozkan Loch, and V. Schlott, “System Integration of SwissFEL Beam Loss Monitors”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 170-174. doi:10.18429/JACoW-IBIC2015-MOPB051
[n] N. Balakrishnan et al., “Control Systems Design for LCLS-II Fast Wire Scanners at SLAC National Accelerator Laboratory”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1076. doi:10.18429/JACoW-ICALEPCS2019-WEPHA010
[n] S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2326-2329. doi:10.18429/JACoW-IPAC2018-WEPAL065
[n] C.-Y. Tsai and R. Li, “Analysis of Microbunching Structures in Transverse and Longitudinal Phase Spaces”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1177-1180. doi:10.18429/JACoW-NAPAC2016-THPOA35
[n] A. Mazzolari et al., “Fabrication of Silicon Strip Crystals for UA9 Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC080, pp. 4243-4245.
[n] S. Park et al., “Electron Bunch Length Measurement using an RF Deflecting Cavity”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 188-190. doi:10.18429/JACoW-FEL2015-MOP066
[n] N. Galindo Munoz, N. Catalan-Lasheras, V. E. Boria, and A. Faus-Golfe, “Pre-Alignment Techniques Developments and Measurement Results of the Electromagnetic Center of Warm High-Gradient Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1868-1871. doi:10.18429/JACoW-IPAC2017-TUPIK076
[n] E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 561-563. doi:10.18429/JACoW-IPAC2017-MOPIK029
[n] S. Schreiber, “Commissioning of the VUV-FEL Injector at TTF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF022, pp. 351-353.
[n] S. A. Werner, “Applications of Pulsed Neutrons from a Spallation Source”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 981-986.
[n] N. De Maio, A. P. Bark, T. M. Cobb, and J. A. Thompson, “Synchronising High-Speed Triggered Image and Meta Data Acquisition for Beamlines”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 225-228. doi:10.18429/JACoW-ICALEPCS2015-MOPGF056
[n] C. Roderick and R. Billen, “The LSA Database to Drive the Accelerator Settings”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP006, pp. 417-419.
[n] C. E. Peters and M. A. Power, “TCP/IP Control System Interface Development Using Microchip* Brand Microcontrollers”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO305, pp. 155-157.
[n] G. L. Wang, D. X. Dai, G. R. Wu, X. M. Yang, and W. Q. Zhang, “Operating of SXFEL in a Single Stage High Gain Harmonic Generation Scheme”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 29-33. doi:10.18429/JACoW-FEL2015-MOC04
[n] M. Borland, T. G. Berenc, L. Emery, and R. R. Lindberg, “Simultaneous Simulation of Multi-particle and Multi-bunch Collective Effects for the Aps Ultra-low Emittance Upgrade”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 61-65. doi:10.18429/JACoW-ICAP2015-WEBJI1
For LaTeX
Use Complete Form
For BibTeX
References
- H. Okuno et al., “New Developments in Low-Z Gas Stripper Sstem at RIKEN Radioactive Isotope Beam Factory (RIBF)”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THB01, pp. 199-205.
- J. Lyles and J. Davis, “Improvements to the Cathode-Follower RF Amplifier System for the LANSCE Proton Storage Ring Buncher”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP142, pp. 1001-1003.
- D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 108-111.
- G. Rehm, M. G. Abbott, and A. F. D. Morgan, “New Features and Measurements using the Upgraded Transverse Multibunch Feedback at Diamond”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD24, pp. 696-699.
- L. H. Chang, S. S. Chang, M. C. Lin, Ch. Wang, and T. T. Yang, “Design of the Cooling System for a 25 kW Landau Cavity at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP36C, pp. 1903-1905.
- K. J. Ruisard, H. Baumgartner, B. Beaudoin, I. Haber, T. W. Koeth, and M. R. Teperman, “Experimental Plans for Single-Channel Strong Octupole Fields at the University of Maryland Electron Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 507-510.
- A. Blednykh et al., “Rogue Mode Shielding in NSLS-II Multipole Vacuum Chambers”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM033, pp. 194-198.
- T. Watanabe et al., “Commissioning of the Beam Energy Position Monitor System for the Superconducting RIKEN Heavy-ion Linac”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 295-302.
- H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
- B. C. Brown et al., “Report on the Production Magnet Measurement System for the Fermilab Energy Saver Superconducting Dipoles and Quadrupoles”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3608-3611.
- T. J. Roberts, S. Ahmed, K. B. Beard, D. Huang, D. M. Kaplan, and L. K. Spentzouris, “G4Beamline Particle Tracking in Matter-dominated Beam Lines”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP120, pp. 2776-2778.
- C. H. Chang, T. C. Fan, I. Hsu, C. S. Hwang, and Ch. Wang, “Magnet Sorting Algorithms for the SRRC EPU5.6”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP31G, pp. 2219-2221.
- L. Xiao et al., “High Frequency SRF Cavity Study for Bunch Shortening in PEPX”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP042, pp. 998-1001.
- A. Novokhatski, “Wake Field Potentials of 'Dechirpers'”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 157-160.
- S. Yamaguchi, A. Enomoto, I. Sato, and Y. Igarashi, “High-Power Test of Traveling-Wave-Type RF-Pulse Compressor”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ25, pp. 1578-1580.
- D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, and A. Y. Orlov, “Test of a Silicon Photomultiplier for Ionization Profile Monitor Applications”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB14, pp. 90-92.
- Y. Kamiya et al., “Magnetic Measurement of the VSX Prototype Magnets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22C, pp. 1940-1942.
- R. Bonifacio, M. Ferrario, N. Piovella, G. R. M. Robb, A. Schiavi, and L. Serafini, “Quantum SASE FEL with a Laser Wiggler”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP016, pp. XX-XX.
- C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 707-710.
- J. Shi, W. P. Chai, J. Li, J. W. Xia, J. C. Yang, and Y. J. Yuan, “Feedback of Slow Extraction in CSRm”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO14, pp. 89-91.
- R. Hampel, W. F. O. M??ller, and T. Weiland, “ROCOCO - A Zero Dispersion Algorithm for Calculating Wake Potentials”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP30, pp. 144-147.
- M. L. Friend et al., “First Beam Profile Measurements by Beam Induced Fluorescence at the J-PARC Neutrino Extraction Beamline”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 184-187.
- O. A. Shevchenko and N. Vinokurov, “Statistical Theory of the SASE FEL Based on the Two-particle Correlation Function Equation”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOOA02, pp. 8-14.
- V. Juvan, I. Dolin, T. Humar, M. Pavleski, and P. P. Goryl, “A Structured Approach to Control System GUI Design for the Solaris Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1044-1046.
- R. Mueller, A. F. Balzer, P. Baumg?ñrtel, G. Hartmann, O.-P. Sauer, and J. Viefhaus, “Modernization of Experimental Data Taking at BESSY II”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 65.
- L. van Riesen-Haupt, A. Seryi, J. M. Coello de Portugal, E. Fol, and R. Tomas, “K-Modulation Developments via Simultaneous Beam Based Alignment in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2159-2162.
- K. Okamura et al., “Development of a Pulsed Power Supply Utilizing 13 kV Class SiC-MOSFET”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4364-4367.
- M. Bona et al., “Performance of the First CERN-INFN 10 m Long Superconducting Dipole Prototype for the LHC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2289-2292.
- J. A. Holmes, “Collective Effects and Instabilities in Space Charge Dominated Beams”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEYLH03, pp. 189-193.
- J. Bobnar, R. Bacher, P. Duval, I. Kri, and M. Lomperski, “New TINE Java General Purpose Diagnostic Applications”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUZ01, pp. 67-69.
- Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 246-249.
- A. Almomani, M. Droba, I. Hofmann, and U. Ratzinger, “Post Acceleration of Laser-generated Proton Bunches by a CH-DTL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB006, pp. 852-854.
- L. Farvacque, “Performance of the ESRF Lattice in the Presenced of Errors”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1515-1518.
- J. W. Rathke, “Parametric Study of Emerging High Power Accelerator Applications using Accelerator Systems Model (ASM)”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP50, pp. 456-460.
- A. Brachmann, M. Dunham, and J. F. Schmerge, “LCLS-II - Status and Upgrades”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 772-775.
- M. P. Donadio, J. R. Piton, and H. D. de Almeida, “Quick Experiment Automation Made Possible Using FPGA in LNLS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 229-232.
- E. Bouquerel, “Design Status of the Beam Switchyard for ESSnuSB”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3215-3217.
- N. Schweizer and I. Pongrac, “Autonomous Topography Detection and Traversal for an Inspection Robot Within the Beamline of Particle Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3943-3945.
- Y. Tao, K. Hwang, and J. Qiang, “Space charge effects of catch-up collision in a CW double-pass proton linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2429-2431.
- A. J. Moss, P. A. Corlett, P. A. McIntosh, J. F. Orrett, A. E. Wheelhouse, and C. J. White, “Progress on the MICE RF System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB055, pp. 3996-3998.
- Z.-D. Tsai, J.-C. Chang, and J.-R. Chen, “The Strategy between Optimal Control and Energy Saving about Utility System Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC132, pp. 1380-1382.
- F. Lin et al., “Simulations of Nonlinear Beam Dynamics in the JLEIC Electron Collider Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 555-557.
- Y. Hori, Y. Kamiya, T. Koseki, N. Nakamura, K. Shinoe, and Y. Takiyama, “Vacuum System Design and Research for the Super SOR”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH307, pp. 2415-2417.
- P. Anger et al., “SPIRAL2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 894-897.
- R. Arnold et al., “Magnetic Measurements and Simulations of a 4-Magnet Dipole Chicane for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS038, pp. 3085-3087.
- S. Redaelli et al., “The LHC Collimator Controls Architecture - Design and Beam Tests”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN081, pp. 344-346.
- I. Sakai et al., “Operation of the Opposite-Field Septum Magnet for the J-PARC Main-Ring Injection”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS107, pp. 1750-1752.
- K. Niki et al., “Beam Transport Design for the Linac System in the INS Radioactive Beam Facility”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-13, pp. 725-727.
- J. Bahrdt et al., “APPLE Undulator for PETRA III”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC096, pp. 2219-2221.
- R. Modic, M. Pavleski, T. Zagar, J. Belmans, P. Della Faille, and D. Vandeplassche, “MYRRHA Control System Development”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4823-4825.
- A. Fedorova and M. Zeitlin, “Multiresolution Representation for Orbital Dynamics in Multipolar Fields”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2B17, pp. 1101-1106.
- H. Euteneuer, K.-H. Kaiser, S. Ratschow, and V. I. Shvedunov, “Beam Blow-up Calculations for RTM and DSM”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP28G, pp. 951-953.
- T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 389-392.
- D. A. Lee, C. Gabor, J. K. Pozimski, and P. Savage, “A laserwire beam profile measuring device for the RAL Front End Test Stand”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB11, pp. 81-83.
- J. Dovc et al., “New Abeans for TINE Java Control Applications”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP025, pp. XX-XX.
- O. Mohsen et al., “Performances of Silicon-Based Field-Emission Cathodes Coated with UltraNano Crystalline Diamond”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2117-2120.
- S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Optical System of Beam Induced Fluorescence Monitor Toward MW Beam Power at the J-PARC Neutrino Beamline”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 505-508.
- P. V. Drumm and Y. Suzuki, “Laser Stripping Injection for the ESS Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A07, pp. 2234-2236.
- N. Ouchi et al., “Design and Development Work for a Superconducting Proton Linac at JAERI”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A03, pp. 22-26.
- H. Suzuki et al., “ECR Ion Source for the KEK All-ion Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC156, pp. 442-444.
- N. Kuklev and Y. K. Kim, “Turn-by-Turn Synchrotron Radiation Transverse Profile Monitor for IOTA”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 432-435.
- J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 317-319.
- P. Pollet, R. Ischebeck, D. Llorente Sancho, G. Marinkovic, C. Ozkan Loch, and V. Schlott, “System Integration of SwissFEL Beam Loss Monitors”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 170-174.
- N. Balakrishnan et al., “Control Systems Design for LCLS-II Fast Wire Scanners at SLAC National Accelerator Laboratory”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1076.
- S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2326-2329.
- C.-Y. Tsai and R. Li, “Analysis of Microbunching Structures in Transverse and Longitudinal Phase Spaces”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1177-1180.
- A. Mazzolari et al., “Fabrication of Silicon Strip Crystals for UA9 Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC080, pp. 4243-4245.
- S. Park et al., “Electron Bunch Length Measurement using an RF Deflecting Cavity”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 188-190.
- N. Galindo Munoz, N. Catalan-Lasheras, V. E. Boria, and A. Faus-Golfe, “Pre-Alignment Techniques Developments and Measurement Results of the Electromagnetic Center of Warm High-Gradient Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1868-1871.
- E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 561-563.
- S. Schreiber, “Commissioning of the VUV-FEL Injector at TTF”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF022, pp. 351-353.
- S. A. Werner, “Applications of Pulsed Neutrons from a Spallation Source”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 981-986.
- N. De Maio, A. P. Bark, T. M. Cobb, and J. A. Thompson, “Synchronising High-Speed Triggered Image and Meta Data Acquisition for Beamlines”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 225-228.
- C. Roderick and R. Billen, “The LSA Database to Drive the Accelerator Settings”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP006, pp. 417-419.
- C. E. Peters and M. A. Power, “TCP/IP Control System Interface Development Using Microchip* Brand Microcontrollers”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO305, pp. 155-157.
- G. L. Wang, D. X. Dai, G. R. Wu, X. M. Yang, and W. Q. Zhang, “Operating of SXFEL in a Single Stage High Gain Harmonic Generation Scheme”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 29-33.
- M. Borland, T. G. Berenc, L. Emery, and R. R. Lindberg, “Simultaneous Simulation of Multi-particle and Multi-bunch Collective Effects for the Aps Ultra-low Emittance Upgrade”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 61-65.
Back to search