Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Ellis and B. G. Smith, “Modal Survey of Medium Energy Superconducting Radio Frequency Cavity for Accelerator Production of Tritium Project”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP027, pp. 258-262.
[n] E. M. Donegani, T. J. Grandsaert, T. J. Shea, and C. A. Thomas, “The Insertable Beam Stop in the ESS SPK Section”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 114-116. doi:10.18429/JACoW-IBIC2020-WEPP07
[n] G. Reinhold, E. Freiberg, and R. Gleyvod, “60 kw Electron Accelerator for a Paint-Curing Facility”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1015-1018.
[n] J. Locatelli et al., “NOMAD Goes Mobile”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB08, pp. 1070-1073.
[n] M. Fujieda et al., “Studies of Magnetic Cores for JHF Synchrotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P040, pp. 2992-2994.
[n] B. Podobedov and Y. Hidaka, “Non-Invasive Dispersion Function Measurement During Light Source Operations”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP30, unpublished.
[n] S. Ahmed, K. B. Beard, T. J. Roberts, D. M. Kaplan, and L. K. Spentzouris, “Interaction of Muon Beam with Plasma Developed During Ionization Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXB01, pp. 3200-3202.
[n] L. H. Chang, K. T. Hsu, C. C. Kuo, W. K. Lau, and C. S. Hsue, “Effect of RF Phase Modulation on the Longitudinal Beam Dynamics”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V045, pp. 1487-1489.
[n] C. Pagani et al., “Piezo-Assisted Blade Tuner: Cold Test Results”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP72, pp. XX-XX.
[n] S. L. Sheehy, D. J. Kelliher, S. Machida, K. J. Peach, H. Witte, and T. Yokoi, “PAMELA: Lattice Solution for a Medical C6+ Therapy Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA022, pp. 115-117.
[n] K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 294-296. doi:10.18429/JACoW-Cyclotrons2016-THB03
[n] D. C. Hagerman, “High Duty Factor RF Sources at 800 MHz”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 197-205.
[n] V. Grishin et al., “ESS WS scintillator system design and test results”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2276-2279. doi:10.18429/JACoW-IPAC2024-WEPG33
[n] D. G. Velazquez, R. L. Seibert, L. K. Spentzouris, J. Terry, and Z. M. Yusof, “Synthesis of Ultra-Thin Single Crystal MgO/Ag/MgO Multilayer for Controlled Photocathode Emissive Properties”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1846-1849. doi:10.18429/JACoW-IPAC2015-TUPMA004
[n] J. Zhu, D. Mihalcea, P. Piot, and C. R. Prokop, “Flat-beam Generation and Compression at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3086-3088. doi:10.18429/JACoW-IPAC2014-THPRO086
[n] D. C. Hagerman, “The Status of LAMPF”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper A02, pp. 12-19.
[n] S. De Santis, J. M. Byrd, R. B. Wilcox, Y. Yin, and Y. Y. Labs, “Remote Synchrotron Light Instrumentation Using Optical Fibers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP072, pp. 3609-3611.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Ellis and B. G. Smith, “Modal Survey of Medium Energy Superconducting Radio Frequency Cavity for Accelerator Production of Tritium Project”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP027, pp. 258-262.
- E. M. Donegani, T. J. Grandsaert, T. J. Shea, and C. A. Thomas, “The Insertable Beam Stop in the ESS SPK Section”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 114-116.
- G. Reinhold, E. Freiberg, and R. Gleyvod, “60 kw Electron Accelerator for a Paint-Curing Facility”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1015-1018.
- J. Locatelli et al., “NOMAD Goes Mobile”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB08, pp. 1070-1073.
- M. Fujieda et al., “Studies of Magnetic Cores for JHF Synchrotrons”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P040, pp. 2992-2994.
- B. Podobedov and Y. Hidaka, “Non-Invasive Dispersion Function Measurement During Light Source Operations”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP30, unpublished.
- S. Ahmed, K. B. Beard, T. J. Roberts, D. M. Kaplan, and L. K. Spentzouris, “Interaction of Muon Beam with Plasma Developed During Ionization Cooling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THXB01, pp. 3200-3202.
- L. H. Chang, K. T. Hsu, C. C. Kuo, W. K. Lau, and C. S. Hsue, “Effect of RF Phase Modulation on the Longitudinal Beam Dynamics”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V045, pp. 1487-1489.
- C. Pagani et al., “Piezo-Assisted Blade Tuner: Cold Test Results”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP72, pp. XX-XX.
- S. L. Sheehy, D. J. Kelliher, S. Machida, K. J. Peach, H. Witte, and T. Yokoi, “PAMELA: Lattice Solution for a Medical C6+ Therapy Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA022, pp. 115-117.
- K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 294-296.
- D. C. Hagerman, “High Duty Factor RF Sources at 800 MHz”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 197-205.
- V. Grishin et al., “ESS WS scintillator system design and test results”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG33, pp. 2276-2279.
- D. G. Velazquez, R. L. Seibert, L. K. Spentzouris, J. Terry, and Z. M. Yusof, “Synthesis of Ultra-Thin Single Crystal MgO/Ag/MgO Multilayer for Controlled Photocathode Emissive Properties”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1846-1849.
- J. Zhu, D. Mihalcea, P. Piot, and C. R. Prokop, “Flat-beam Generation and Compression at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3086-3088.
- D. C. Hagerman, “The Status of LAMPF”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper A02, pp. 12-19.
- S. De Santis, J. M. Byrd, R. B. Wilcox, Y. Yin, and Y. Y. Labs, “Remote Synchrotron Light Instrumentation Using Optical Fibers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP072, pp. 3609-3611.
Back to search