Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
[n] R. J. Averill et al., “Positron-Electron Multicycle Injection at the CEA Colliding Beam Project”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 221-224.
[n] C. Ozkan Loch, M. Gregorio, R. Ischebeck, N. Samadi, and J. Vila Comamala, “Beam size measurement developments at SLS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4814-4816. doi:10.18429/JACoW-IPAC2023-THPL148
[n] P. Cameron et al., “Tune Feedback at RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH032, pp. 1294-1296.
[n] J. P. Koutchouk, M. Bassetti, W. Scandale, and A. Verdier, “Optimizatiion of the LHC Lattice and Chromaticity”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1284-1287.
[n] L. Hechler, “Converting Equipment Control Software from Pascal to C/C++”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP034, pp. XX-XX.
[n] W. M. Cameron and C. Mark, “Remote Installation and Removal of Shielding and Equipment in the Cyclotron Tank”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J04, pp. 351-354.
[n] J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n] B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
[n] M. H. Burt et al., “An Improved Polarisation Analyser for the I16 Beamline at Diamond”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 346-348. doi:10.18429/JACoW-MEDSI2018-THPH05
[n] K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
[n] A. Passner and R. C. Catura, “Design of a Transport System for High Intensity Beams”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 912-917.
[n] S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699.
[n] T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307.
[n] B. Burnham, V. N. Litvinenko, and Y. Wu, “Application of Precision Magnetic Measurements for Control of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA01, pp. 524-526.
[n] R. F. Koontz, “A New Injector (NPI) for Nuclear Physics at SLAC”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0039, pp. 198-199.
[n] E. Petit, “Progress of the SPIRAL2 Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916.
[n] O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4114-4117. doi:10.18429/JACoW-IPAC2017-THPIK005
[n] R. F. Koontz, L. Feathers, C. Kilbourne, G. Leger, and T. McKinney, “An Isolated Grid Electron Gun and Pulser System for Long/Short Pulse Operation”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0037, pp. 430-432.
[n] K. H. Hsu et al., “Design Modifications and Installation of the Injection Girder System in the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1968-1970. doi:10.18429/JACoW-IPAC2014-WEPRO013
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
- R. J. Averill et al., “Positron-Electron Multicycle Injection at the CEA Colliding Beam Project”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 221-224.
- C. Ozkan Loch, M. Gregorio, R. Ischebeck, N. Samadi, and J. Vila Comamala, “Beam size measurement developments at SLS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL148, pp. 4814-4816.
- P. Cameron et al., “Tune Feedback at RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH032, pp. 1294-1296.
- J. P. Koutchouk, M. Bassetti, W. Scandale, and A. Verdier, “Optimizatiion of the LHC Lattice and Chromaticity”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1284-1287.
- L. Hechler, “Converting Equipment Control Software from Pascal to C/C++”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP034, pp. XX-XX.
- W. M. Cameron and C. Mark, “Remote Installation and Removal of Shielding and Equipment in the Cyclotron Tank”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J04, pp. 351-354.
- J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245.
- B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
- M. H. Burt et al., “An Improved Polarisation Analyser for the I16 Beamline at Diamond”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 346-348.
- K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
- A. Passner and R. C. Catura, “Design of a Transport System for High Intensity Beams”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 912-917.
- S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1696-1699.
- T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 302-307.
- B. Burnham, V. N. Litvinenko, and Y. Wu, “Application of Precision Magnetic Measurements for Control of the Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA01, pp. 524-526.
- R. F. Koontz, “A New Injector (NPI) for Nuclear Physics at SLAC”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0039, pp. 198-199.
- E. Petit, “Progress of the SPIRAL2 Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916.
- O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4114-4117.
- R. F. Koontz, L. Feathers, C. Kilbourne, G. Leger, and T. McKinney, “An Isolated Grid Electron Gun and Pulser System for Long/Short Pulse Operation”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0037, pp. 430-432.
- K. H. Hsu et al., “Design Modifications and Installation of the Injection Girder System in the Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1968-1970.
Back to search