Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Alemany-Fernandez et al., “The LHC Sequencer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN027, pp. 300-303.
[n] K. R. Crandall and D. P. Rusthoi, “TRACE: An Interactive Beam Transport Code”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0017, pp. 371-373.
[n] S. Seletsky, V. Tupikov, S. Nagaitsev, and A. Shemyakin, “Field Measurements in the Cooling Section Solenoid for the Recycler Cooler”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO012, pp. 2373-2375.
[n] Ch. Schmidt et al., “Performance of the MTCA.4 Based LLRF System at FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2433-2435. doi:10.18429/JACoW-IPAC2014-WEPME067
[n] L. M. Bollinger et al., “First Operational Tests of the Positive-Ion Injector for ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1120-1123.
[n] S. Nagaitsev et al., “Status of the Fermilab Electron Cooling Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI032, pp. 1094-1096.
[n] J. Campmany et al., “Upgrade of the ALBA Magnetic Laboratory for Measuring LIPAc HEBT Quadrupoles and Dipole”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2369-2371. doi:10.18429/JACoW-IPAC2018-WEPMF001
[n] D. Zhu, A. W. Cross, Y. E. Tan, and L. Zhang, “The Conceptual Design of a 36 GHz RF Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1676-1678. doi:10.18429/JACoW-IPAC2019-TUPRB002
[n] B. Bradu et al., “Compensation of Beam Induced Effects in LHC Cryogenic Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1205-1208. doi:10.18429/JACoW-IPAC2016-TUPMB048
[n] W. Brefeld, R. Brinkmann, and J. Rossbach, “Low Emittance Optic for PETRA II”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 166-169.
[n] G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1552-1556. doi:10.18429/JACoW-ICALEPCS2017-THPHA071
[n] A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 476-478.
[n] S. Hirlaender et al., “LEIR Injection Efficiency Studies as a Function of the Beam Energy Distribution from Linac3”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 758-760. doi:10.18429/JACoW-IPAC2018-TUPAF034
[n] A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-Layer Flat Chambers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI022, pp. 1455-1457.
[n] G. Turemen et al., “Current Status of the SANAEM RFQ Accelerator Beamline”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3952-3955. doi:10.18429/JACoW-IPAC2015-THPF103
[n] J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216.
[n] N. M. Kroll and X. Lin, “Computer Determinations of the Properties of Waveguide Loaded cavities”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO467, pp. 238-240.
[n] T. Ladzinski, R. Saban, and R. Schmidt, “STRICT: STRing2 Instrumentation and Configuration Tool”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO010, pp. 2031-2033.
[n] V. Shiltsev, D. Finley, A. Sery, and V. Danilov, “Compensation of Beam-Beam Effects in the Tevatron Collider with Electron Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA148, pp. 3728-3730.
[n] Ch. Schmidt et al., “Recent Developments of the European XFEL LLRF System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME009, pp. 2941-2943.
[n] W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 663-667. doi:10.18429/JACoW-LINAC2016-WE1A05
[n] P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568.
[n] R. M. Jones et al., “Manifold Damping of Wakefields in High Phase Advance Linacs for the NLC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI056, pp. 906-908.
[n] A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-layer Round Chambers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI021, pp. 1452-1454.
[n] K. Szamota-Leandersson et al., “PolFEL ÔÇö New Facility in Poland”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 746-748. doi:10.18429/JACoW-FEL2019-THP081
[n] E. Barzi, “What is needed for BISCO to work in a dipole insert for 20 tesla hybrid accelerator magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3723-3726. doi:10.18429/JACoW-IPAC2023-WEPM065
[n] D. Sertore, P. Michelato, L. Monaco, and C. Pagani, “A Study for the Characterization of High QE Photocathodes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN024, pp. 2760-2762.
[n] W. C. Sellyey and R. W. Kruse, “Operational Amplifier Based Stretcher for Stripline Beam Position Moniters”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1145-1148.
[n] E. Laface, G. Kontogiorgos, and J. Esteban Muller, “Analytical potential model for the Radio-Frequency Quadrupole at the European Spallation Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3356-3358. doi:10.18429/JACoW-IPAC2023-WEPL106
[n] K. R. Crandall, “RFQ Radial Matching Sections and Fringe Fields”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0009, pp. 109-111.
[n] J. Campmany, J. Marcos, and V. Massana, “Performance of ID at ALBA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC171, pp. 3299-3301.
[n] F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
[n] A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4495-4498. doi:10.18429/JACoW-IPAC2023-THPL034
[n] L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Alemany-Fernandez et al., “The LHC Sequencer”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN027, pp. 300-303.
- K. R. Crandall and D. P. Rusthoi, “TRACE: An Interactive Beam Transport Code”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0017, pp. 371-373.
- S. Seletsky, V. Tupikov, S. Nagaitsev, and A. Shemyakin, “Field Measurements in the Cooling Section Solenoid for the Recycler Cooler”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO012, pp. 2373-2375.
- Ch. Schmidt et al., “Performance of the MTCA.4 Based LLRF System at FLASH”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2433-2435.
- L. M. Bollinger et al., “First Operational Tests of the Positive-Ion Injector for ATLAS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1120-1123.
- S. Nagaitsev et al., “Status of the Fermilab Electron Cooling Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI032, pp. 1094-1096.
- J. Campmany et al., “Upgrade of the ALBA Magnetic Laboratory for Measuring LIPAc HEBT Quadrupoles and Dipole”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2369-2371.
- D. Zhu, A. W. Cross, Y. E. Tan, and L. Zhang, “The Conceptual Design of a 36 GHz RF Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1676-1678.
- B. Bradu et al., “Compensation of Beam Induced Effects in LHC Cryogenic Systems”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1205-1208.
- W. Brefeld, R. Brinkmann, and J. Rossbach, “Low Emittance Optic for PETRA II”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 166-169.
- G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1552-1556.
- A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 476-478.
- S. Hirlaender et al., “LEIR Injection Efficiency Studies as a Function of the Beam Energy Distribution from Linac3”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 758-760.
- A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-Layer Flat Chambers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI022, pp. 1455-1457.
- G. Turemen et al., “Current Status of the SANAEM RFQ Accelerator Beamline”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3952-3955.
- J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216.
- N. M. Kroll and X. Lin, “Computer Determinations of the Properties of Waveguide Loaded cavities”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO467, pp. 238-240.
- T. Ladzinski, R. Saban, and R. Schmidt, “STRICT: STRing2 Instrumentation and Configuration Tool”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO010, pp. 2031-2033.
- V. Shiltsev, D. Finley, A. Sery, and V. Danilov, “Compensation of Beam-Beam Effects in the Tevatron Collider with Electron Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA148, pp. 3728-3730.
- Ch. Schmidt et al., “Recent Developments of the European XFEL LLRF System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME009, pp. 2941-2943.
- W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 663-667.
- P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568.
- R. M. Jones et al., “Manifold Damping of Wakefields in High Phase Advance Linacs for the NLC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI056, pp. 906-908.
- A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-layer Round Chambers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI021, pp. 1452-1454.
- K. Szamota-Leandersson et al., “PolFEL ÔÇö New Facility in Poland”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 746-748.
- E. Barzi, “What is needed for BISCO to work in a dipole insert for 20 tesla hybrid accelerator magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM065, pp. 3723-3726.
- D. Sertore, P. Michelato, L. Monaco, and C. Pagani, “A Study for the Characterization of High QE Photocathodes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN024, pp. 2760-2762.
- W. C. Sellyey and R. W. Kruse, “Operational Amplifier Based Stretcher for Stripline Beam Position Moniters”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1145-1148.
- E. Laface, G. Kontogiorgos, and J. Esteban Muller, “Analytical potential model for the Radio-Frequency Quadrupole at the European Spallation Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL106, pp. 3356-3358.
- K. R. Crandall, “RFQ Radial Matching Sections and Fringe Fields”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0009, pp. 109-111.
- J. Campmany, J. Marcos, and V. Massana, “Performance of ID at ALBA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC171, pp. 3299-3301.
- F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
- A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL034, pp. 4495-4498.
- L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
Back to search